I have a brand new PMAS 120 cold air intake from when I had an 08 GT500 (Sold it). Does this cold air fit the 11-12 GT500's, 13-14 GT500's, or 5.0's with a similar blower? I can't see the difference from the pictures I see online.
Thanks
Thanks
PMAS 120 Cold Air Question
- Thread starter usafimj
- Start date
Most of these cold air kits for S197 mustangs are somewhat universal, so technically it will work. However, they have different part nos. for 07-10 and 11-14 and they have different meters for with and without a tune. Where differences come in are the heat shield that goes around the air filter to block off underhood air. I would imagine someone with a 11-14 could use that MAF with the right heat shield, but I would think only the tuned version will work. The one without a tune uses a different MAF sensor that meters frequencies, not voltage.
The one I have is a tune required version. Someone with a 2014 5.0 with a Roush is asking if it'll fit. I just don't know since they all look the same.
I don't think they'd list them under different part numbers if it fit. The ABS module is mounted in the way of the CAI on later models, so if there's a difference, it's likely the heat shield. You could contact PMAS, or tell him to do it. They may sell the heat shield separate.
I believe the later models also flipped the vacuum/PCV on the tube itself.
Users who are viewing this thread
