Search results

  1. IllCobra

    Diff leaking from vent

    So, I can't figure this out. I traded my stock irs to someone with a "beefed" up irs - Ford diff cover, MM Rear Race Grip Package (similar to what Full Tilt Boogie offers), G-Force axles, etc. And since I installed the new irs it has been leaking. There is some hard shaking/vibration from the...
  2. IllCobra

    HP #s for VMP 2.3 blower and cams

    Curious on what guys running the vmp 2.3 blower with cams are making for power? I am planning on going E85 sometime soon and was curious what other owners are making on this smaller blower with cams, and if it was worth it to do cams or find myself a used 2.9 gen 4 whipple crusher to reach my...
  3. IllCobra

    Is it a good idea to upgrade the T56 magnum

    It's been a while since I've posted. Lately I've thinking about selling my T56 and upgrading to a T56 Magnum. But looking at Lethal Performance's site, I saw that they offer upgraded magnum's by RPM transmission's. For example their level 5 trans has the following upgrades over a stock T56...
  4. IllCobra

    Belt shredding after new alternator

    Installed a Mechman 170 alternator and after doing a pull from 2000 to 4500 for my tuner, the car ate through the side of my new gates belt. It looks like the belt is walking toward the front of the pulleys and getting chewed up. All was good before I installed this new alternator, so it...
  5. IllCobra

    Pinion Flange or U-Joints?

    So hopefully I can save some time and money by making this thread. I had a leaking pinion flange seal that I fixed, but after test driving the car I noticed a clunk noise that I can feel after letting off the gas and getting back on it. Strange thing about this is that it only does it in 5th and...
  6. IllCobra

    WTB: Jetronic To USCAR Fuel Injector Adapter Kit

    Like the title says, I am looking for 8 fuel injector adapters for my Siemens Deka #60 injectors- Jetronic to USCAR. I purchased a kit from LMR but those things were pieces of crap, I honestly can't believe how LMR can sell these things. Horrible quality. Anyway, let me know what you have.
  7. IllCobra

    What kind of harness adapters do I need?

    I may need to test some used Deka 60 lb injectors I bought but never got to install. However, I am not sure which harness adapters I need to get them to fit. Is it the EV1 to EV6 adapters? Here's a picture of the injectors if that helps.
  8. IllCobra

    What kind of harness adapters do I need?

    I may need to test some used Deka 60 lb injectors I bought but never got to install. However, I am not sure which harness adapters I need to get them to fit. Is it the EV1 to EV6 adapters? Here's a picture of the injectors if that helps.
  9. IllCobra

    What is going on with my car?

    I can't figure out what is going with my 03 Cobra. I am getting it tuned by 04Sleeper and I can't figure out why it's not staying on with Kevin's latest revision. I am hoping I can get some suggesting on what I need to do to get this thing running. Hopefully I can explain this without causing...
  10. IllCobra

    Anyone in Vero Beach/Sebastian FL. area

    I was going to post this in the Florida section but this section get a lot more traffic. I need a favor from someone in the area. I need to borrow their working SCT2600, SCT3000, or something that will fit JLT's high boost maf sensor slot. I just installed a VMP blower, high boost intake, and...
  11. IllCobra

    Issues after new setup

    Well, things aren't going too great after finishing the 2.3 VMP install on my cobra. After my tuner sent me the initial base tune, the following now happens: it starts up normal, but after a second or two, rpms drop to 500 and it sounds like it has a nasty cam. This goes on for about 12-15...
  12. IllCobra

    Issues after new setup

    Well, things aren't going too great after finishing the 2.3 VMP install on my cobra. After my tuner sent me the initial base tune, the following now happens: it starts up normal, but after a second or two, rpms drop to 500 and it sounds like it has a nasty cam. This goes on for about 12-15...
  13. IllCobra

    Issues after new setup

    Well, things aren't going too great after finishing the 2.3 VMP install on my cobra. After my tuner sent me the initial base tune, the following now happens: it starts up normal, but after a second or two, rpms drop to 500 and it sounds like it has a nasty cam. This goes on for about 12-15...
  14. IllCobra

    Help with some Dragon TB and Plenum issues for VMP Blower *Pictures*

    So my brother and I finally started the process of swapping my ported eaton to the 2.3 VMP blower I have had sitting in my closet since February. But as usual, we ran into some problems. Not with blower but with the dragon tb and plenum. So since I have VMP's plenum, I have to use the IAC...
  15. IllCobra

    Oil for VMP 2.3

    I bought a used Gen 2 VMP 2.3 off a guy that said it only had 8,000 miles on it. If true, the oil it has in it currently should be fine and be good for many more miles . However, I always like putting new fluid in myself , I am sure many of you can relate. So my question is, can I use the same...
  16. IllCobra

    Help identify these bolt holes

    I traded my pretty much stock irs for a beefed up one with MM's Rear Race Grip Package, G Forces axles, and Ford diff. I am was cleaning it up so that I can begin reinstalling it either today or during the week. However, I noticed 2 bolt holes with missing bolts. I don't remember these bolts...
  17. IllCobra

    WTB Front and Rear Brake kit

    Looking to see if anyone has a NEW front and back pad/rotor kit they're looking to sell. Preferably looking at the Power Stop Z26 Street Warrior Performance Brake Kit K1305-26 But will listen to any other offers. Not looking to spend big money on brembos right now, and I've heard good things...
  18. IllCobra

    N2MB Rev Limiter Function

    I haven't seen this discussed at all when I searched, so I am hoping I can get some answers. What do you guys have your Rev Limiter function set on your N2MB WOT box to? Based on my understanding, when our cars hit the rev limiter, the ECU cuts fuel which could cause engine damage. If you...
  19. IllCobra

    WTB or trade VMP 3.0 Pulley

    As the title reads, looking for a VMP 3.0 pulley. Willing to buy or trade for a VMP 2.55 pulley that came on the blower. Let me know.
  20. IllCobra

    Pulley size for slightly higher compression

    So I just bought a Gen 2 VMP blower this past weekend and need help on what pulley size I should get. The guy included a pulley that he said was a 2.4, but I measured it and it had an 8 inch circumference. Which means it's actually an 2.55 pulley. I am not going to be using the pulley since I am...
  21. IllCobra

    WTB Gen 2 VMP Blower

    Anyone looking to upgrade their blower or simply sell their current set up this winter? Looking at a Gen 2 VMP blower with pulley, plenum, and TB. I would like something with low miles. I dont mind making a drive, so I would prefer someone in FL to save on shipping. But if you're selling for a...
  22. IllCobra

    WTB Magnaflow Mufflers

    As the title reads, looking for a pair of Magnaflow mufflers with 2.5 inch offset inlet and offset outlet for my 03 Cobra. My stingers are too loud and I prefer the deeper tone of the Magnaflows. I believe the part number is 14377. I prefer just the mufflers since i already have the exhaust...
  23. IllCobra

    WTB 265 35 18 tires

    Looking for a pair of 265 35 18 front tires. Gotta have at least 70% thread life. Don't really care if they're Nitto, Toyo, Pirelli, etc. as long as they're in good condition. Looking for local to keep it on the cheaper side - Central or South FL.
  24. IllCobra

    Driver and passenger side Seat belts 03 04 Cobra

    Looking for a price on driver and passenger side Seat belts for the the 2003 2004 Cobra.
  25. IllCobra

    Mac longtubes pinching AC lines.

    So my brother and I are gapping the spark plugs and i notice that an AC line is pinched in between my Mac LTs and the body of the car on the passenger side (duh). Now, we know we can't just leave the line there unless i want the it blow up on me, but my brother is telling me we're are going to...

Top