Search results

  1. CrawCobra97

    WTB: 2.3 Whipple, Kenne Bell, VMP

    Looking to buy a used twin screw for my 03 cobra. Would prefer a 2.3 whipple, but I will also take a Kenne Bell or older VMP. Thanks! Sent from my SM-G975U using the mobile app
  2. CrawCobra97

    WTB M122 with cracked casing

    Does anyone have a m122 for sale with a cracked casing or one sitting around thats not being used that someone woukd sell for cheap, all I need is the internals and front drive the case is not my concern. So if you have one taking up space I will be more than happy to take it off your hands...
  3. CrawCobra97

    wtb 96-99 Cobra

    show me what you got looking for 96-98 cobras. Show me the coupes. No Verts. Any color. If you want sell show me now, preferably in the midwest area but will make a trip for the right car
  4. CrawCobra97

    WTB 03/04 Cobra

    hey guys will be in the market here very soon to buy an 03/04 cobra, at least try to haha, my budget is 14k. I know that's probably low but just seeing what I could get it anything if not, I have no problem getting a 2012 GT. I'm open to any color. I do want a Vert. Miles aren't to concerining...
  5. CrawCobra97

    Looking for a 95 Kenne Bell

    Looking to see if anyone wants to sell a Kenne Bell for a 95 5.0. I know Kenne Bell stopped production on these a while ago. So figured this would be my best bet
  6. CrawCobra97

    4v Modfox questions!!!

    So I came across a fox body with a 4v swapped in it for 5k, it has long tunes Cai, and msd coil packs, has 147,500 miles on motor, swapped from 98 donor, has front seats sn95 dash gauges, center console, new clutch, short throw, anyways I was just wondering a couple of things any common problems...
  7. CrawCobra97

    How safe is a vortech

    Hey guys so I'm pretty sure I'm going to do a vortech on my cobra, I really would like to intercool it but not sure if I will have enough for it, are they still safe non intercooled, at least for a little while until I can afford an intercooler setup? This is unless I can't come across a decent...
  8. CrawCobra97

    Suggestions on tuners

    I'm looking to find a really good tuner, for my 97 cobra after I do the vortech setup I want it as safe as can be while still getting good power, it will be intercooled, I'm just looking for advice, I'm from the St. Louis area and would rather be local, or if it's possible for someone to mail...
  9. CrawCobra97

    how common is a terminator swap?

    Sons have been looking to just about every option on what to do with this cobra I have, I am considering a lot of things... Including forging my internals, vortech, KB, ect. My budget is around 5k I would want to start with close to 400 rwhp, but almost would like to have the ability for room to...
  10. CrawCobra97

    Swap guys I need your help

    Okay so I have been thinking of a lot of things to do with this cobra, have looked into every outcome, right now I'm thinking of building the bottom end and whatever else I can, my budget is about 5k what I'm wanting to know is if there is a swap out there that could put me close to 400rwhp and...
  11. CrawCobra97

    Forging internals on 97 cobra

    Hey guys just was wondering how much it would be to forge my internals, I'm only looking for 500rwhp max, so I don't need the best of the best, I just Am trying to get a ballpark number on how much I could forge my internals for,
  12. CrawCobra97

    Building a foundation?

    So for a while now I've been trying to decide what I want to do with my cobra, I have been really thinking about doing a 2.1 KB but the more I think if this where one of you more experienced fellas on here would you recommend building the motor first as in forging the internals, Camming, ect...
  13. CrawCobra97

    Vortech intercooling?

    Hey guys I seen that Anderson Motorsports sells a vortech v3 si kit for 3,800 comes with power pipe all brackets 255 fuel pump, and T. rex external pump, says all I need is injectors and tune, say I were to go with this kit, what else would I need to do to be able to intercool this with a b head...
  14. CrawCobra97

    Wheel fitment questions!!!

    So I just got a killer deal on some black American muscle saleen wheels, the only problem is that there 18s, my plan was to put 275/40/18 radials on the back (near future putting one 2.1 kenne bell) and keeping 245/40/18 up front will his setup work with my car being 2 in lowered on tohicko...
  15. CrawCobra97

    On3 turbo kit?

    Seen an on3 performance turbo kit for a 97 cobra new for a good price. Are these kits any good, has anybody in here installed one I would feel like that's a lot!!! Of work, just seeing or wondering what people think of these kits and if they have had any luck
  16. CrawCobra97

    Spoiler delete??

    I am thinking about taking my spoiler off I seen a kit where it just gives you plastic plugs for the holes where your spoiler goes? My question is does anybody know the size of the whole? I feel like I can just get plastic plugs at an auto parts store for much cheaper and have a better fit? If I...
  17. CrawCobra97

    Kenne bell guys I need help!!!

    I'm trying to decide how to build my 97 cobra, I'm thinking of a kenne bell build or a n/a build with spray, I'm 21 and don't make much money, could I buy a brand new 2.1 kit from kenne bell and be safe with low for boost for awhile until I could get the meth, and bigger injectors,m?
  18. CrawCobra97

    Thinking of doing a kenne bell on my 97

    I've got a 97 cobra, I am trying to figure out what supercharger I should go with.. From my own research it seems vortech is the way to go but it's expensive for a new kit and used ones are hard to find plus don't know how I feel about buying one I'm thinking about doing a kenne bell...
  19. CrawCobra97

    97 cobra vortech s trim help

    Hey guys been thinking of doing a vortech s trim Build thinking all said and done it should cost about 3k and I'm hoping for anywhere from 400-425 to the wheels what all do I need for the build though like supporting mods
  20. CrawCobra97

    Dyno tuned my 97 gorgon today!!

    Well I got my 97 cobra dyno tuned today put down 282 rwhp so it was alright for a pretty much stock motor, only has catback, hi flo cats, and a ud harmonic pulley, was wondering what the most cost efficient thing to do with these cars though, thought about nitrous, because an all motor build is...
  21. CrawCobra97

    Boost questions!!! Help please!!

    So I just was talking to someone that said that I could replace my rods, and boost my car for about 2k max and be able to push over 450 plus is this true, manly rods are like 600 for our 4vs!! Lol
  22. CrawCobra97

    Tuning help anyone?!?

    So a little while ago I bought a x3 sct flash tuned for my car, I put the sct tuners 93 octane tune on my car and it gave it a little bit more but, it gives me the option to customize that tune more what are some things I could do to safely increase the power output a little bit more. I'm...
  23. CrawCobra97

    Burning oil need help

    I'm pretty sure I'm burning oil I'm going to assume it's the valve guides how hard is this to fix??
  24. CrawCobra97

    97 motor mounts

    I was wondering if motor mounts were the same as a 5.0 cobra in considering a 351 swap but if motor mounts are diff I feel like it would to complicated
  25. CrawCobra97

    I'm at a crossroads boys need help

    Alright guys so I have come to a deciding factor that nitrous is the most cost efficient route to build my motor..I have really liked the 5.0 motors would love to have the years before mine which would be the 94-95 but don't think anybody would want to trade have posted in the forums... So my...