Search results

  1. badcobra

    What Injectors are you running?

    The list of advantages is endless. Closed loop fueling control being the main one. You set a target A/F and the Holley uses the wideband and MAP sensors to correct fueling to obtain desired A/F. You can set multiple safeties to shut the car down in case something bad happens. You can run...
  2. badcobra

    What Injectors are you running?

    You have to be careful on the Bosch 210's, there are a tremendous amount of fakes out there. I and many others have bought from this eBay seller and we have verified their authenticity with Bosch USA. They come in individual Bosch boxes with the protect codes on them. Without a highly skilled...
  3. badcobra

    What Injectors are you running?

    Few observations. You don't need a triple pump set up for what you're looking to do. You can take a stock pump hat and modify it by adding a 2nd feed on it and run twin 340's. That will easily support a ported Eaton setup on corn, even with a 150 shot. This is what we used to do back in the...
  4. badcobra

    Winter tires

    Why would you drive this car in the snow/ice and subject it to salt? Also as stated, an ultra high performance all season is not even remotely close to a snow tire. Buy a shitbox Mustang GT and drive that thing in the winter and park the Cobra.
  5. badcobra

    Honing cyl bore to increase piston to wall clearance

    If I am tearing the engine down and honing cylinders, last thing I would ever do is put stock pistons back in. The skirts on stock pistons are paper thin and they are very low compression. The other consideration is, after all those heat cycles, the pistons have differing diameters, meaning...
  6. badcobra

    Car is breaking up when I stab the throttle

    This is what a wobbled out keyway on your trigger wheel looks like. It causes all kinds of timing problems. How it happens is many guys pull their balancer on with the crank bolt and the balancer doesn't seat all the way on this is the result. Make sure you are using a balancer install tool...
  7. badcobra

    Degreeing Cams for 5.4 4V With Tremi Heads

    Email Todd Warren and he will send his recommendations. He's a cam guru. [email protected]
  8. badcobra

    ProEFT Tuning - Compound Boosted Terminator

    Very few tuners want to deal with ProEFI. Errol @ TPS in West Palm is who most seem to go through. That is who I would recommend calling.
  9. badcobra

    billet crank sprocket?

    Call Autonation Ford White Bear Lake see if they have one in stock. That part is not showing discontinued, so probably just an availability issue.
  10. badcobra

    First Teksid build.

    If you are using 03 Cobra heads, you use 32 of the larger ones. Jordan should know that, give him a call.
  11. badcobra

    Turbo spec help - Comp Oil less

    What kind of racing you do? I assume roll racing since you're in Houston and stick shift lol. I would move to a t4 housing. You'll have to have your flanges modified to accommodate the change, but it will be worth it. I would also consider bigger turbos. To be competitive down there, you...
  12. badcobra

    Turbo spec help - Comp Oil less

    What turbos do you have now? Are they Garrett based? They are easily rebuildable if so. What are you running for a scavenge pump?
  13. badcobra

    Battery Size?

    I run a group 65 Duracell from Sam's Club. I think it's 850cca? Also mounted in the back. Seems to work just fine.
  14. badcobra

    16k mile turbo 03 cobra concerns

    The torque box welds are easily repaired, just need a grinder and someone who knows how to weld. The cage is a different story. I would venture to guess virtually no chassis shop is going to want any part of fixing a poorly welded cage.
  15. badcobra

    First Teksid build.

    You only bought 32 of this one right??
  16. badcobra

    Storing cobra with E70-E85.

    Those are not stainless. Plan to yank them and clean them in the spring. We have a local guy who does a great job. Log into Facebook
  17. badcobra

    Storing cobra with E70-E85.

    Just fill the tank up and call it good. I have never done anything special with e85 and my car has sat for long periods of time in a regular garage. What's far more important is injector maintenance. Non-stainless injectors are known to stick from e85 when they sit.
  18. badcobra

    Some upgrades for badcobra - Twin PTE 6870's, 6" Garrett intercooler

    Yeah last half of the track I just barely creeped ahead. Had him by .73mph at the stripe. Was happy to see the win light come on.
  19. badcobra

    Some upgrades for badcobra - Twin PTE 6870's, 6" Garrett intercooler

    I think it definitely has to do with downforce, I'm just not fully sure on the physics of it. That's exactly why I put that wing on there though, to be able to plant the power. 38.5lbs of boost there through the traps.
  20. badcobra

    Some upgrades for badcobra - Twin PTE 6870's, 6" Garrett intercooler

    Thanks Geoff. The wing is a strutless drag wing made by a guy named Robert Carter. Picked up a wingless v6 trunk lid from a junkyard and painted everything. It turned out pretty nice. I noticed something in my logs from this run how much that downforce helps lock the front the rear wheel...
  21. badcobra

    Some upgrades for badcobra - Twin PTE 6870's, 6" Garrett intercooler

    Ran a local event called MAP Proving Grounds at Brainerd International Raceway last weekend. I made it to the final of the roll race event and ran my buddy's Supra. It has an 88mm on it and runs nearly 50psi, just a super badass car. I had been turning badcobra up all day and saved my best...
  22. badcobra

    Lots of oil on spark plugs??

    Make sure when you replace or reinstall those seals that you thoroughly clean the cover and seals with brake cleaner. Also, use some weatherstrip adhesive when you seat the seals on and they'll never pop off or need to be replaced again. Most importantly, they won't leak and cause an oily mess.
  23. badcobra

    03 Cobra Speed Sensor Location ???

    The speed sensor has nothing to do with the tach
  24. badcobra

    26 vs 28 inch height tires on 15 inch rim

    Fixed this for you
  25. badcobra

    SVTP is Going Offline | We’re Moving | New Server News and Software Updates

    I used to enjoy clicking the Terminator forum and seeing the list of all the most recent posts instead of having to click on the sub-forums to see them. Is there any way to get that back? Sorry if this has already been asked.