Search results

Hello guys, so ill try to keep this brief. This is how to install Kook Long Tubes on any 4v cobra engine (99-04, also for Teksid) Ill start by saying, this guide is specifically for Kooks LTs, 1 3/4 x 1 7/8 x 3 (However will work the same on any 1 3/4 style non-stepped or smaller), and will...

Hello all, Just about finished wrapping up my 03/04 cobra teksid build, and what do you know more susprises. I have a garbage bearing filled 99/01 cobra oil cooler which wont work anyway (Im trying to get away from the oil cooler design all together) and I heard you can use a 99-04 GT oil...

Hi there guys, ill try to make this short and sweet. Just went to bolt up glenns modded 03/04 cobra tank into my 01 cobra (advertised for all 99-04 mustangs) and 2 things are going to be an issue. One, right next to the vapor valve, the larger blue valve that connects to the cannister.. its...

Hey guys, Just wanted to give a semi-brief shoutout to Bruce at FTBR (ac427cobra), even though im sure hes gotten this praise thousands of times already haha. So my first impression was reading the complete guide on how to make the IRS in the cobras work for us rather than against us, it was...

So ill try to be as detailed as possible, please bear with me. This from the start is a negative review to my dismay, and is on going. A quick backstory, before I even got my cobra almost 3 years ago, I stumbled upon Maryland Speed, and i knew I wanted kooks after seeing/hearing them on a...

Hey guys, looking to find a nice COMPLETE Eaton swap kit (The charger, the brackets, the lines, the nuts and bolts, literally everything) Im in Central NJ, so if you live close by, even better! If not ill obviously cover shipping. If its something close to complete and missing something minor...

Hey guys, couple of quickies My machine shop finally got back to me about my block, its a 97 block which had 95k or so before teardown, my guy told me that the stock bore size in his catalog for this block should be 3.551, while online its telling him 3.552. The issue is hes saying every single...

Hi all, ill try to be quick with this. I bought a teksid block recently, and it has the usual forged cobra crank inside it. For the build, Im going to use the forged crank (supposed to hold a lot of hp, cant remember the number) and have the block cleaned up. For the internals, what company is...

Hi all, Ill try to make this as quick as possible. Just reecently ran my 01 down my local strip, only to halfway down notice a weird noise and immedietly slowed down. Took it very easy the few minutes it took to get to my house, and than got to work. Took down the oil pan, and found the...

Just a quickie.. the outside of the wheel is chrome plated, but the interior is bare aluminum. Whats the easiest way to polish the inner wheel to a mirror finish to at least match the chrome (slightly) Ive seen it done a thousand times but never on my own set. Also, has anybody else ever...

Hi there guys, so I need some insight on this if possible, I know somebody on here has got to know. Obviously as the post states, I have a 01 Cobra, my eventual plans are for fully forged internals (instead of just the crank) with basically every bolt on humanly possible. Now, my goal has always...

Basically I ordered a set of these headlights awhile back when I had my 6er, and found out that after 250 bucks they werent my style which kind of sucked. I ordered the headlights from American Muscle (you can check it out on their website) and ordered a set of H1 and H7 bulbs (still in...

Alright, heres the backstory. I just bought a hood, and I wanted to find out a couple of things because this is the first time ive dealt with fiberglass parts before. First: The latch is odd, ill attach a picture to show everything. Basically when I test fit the hood I didnt want to slam it...

Hi there guys, I just finally got my 01 Cobra, and the guy has an entire flowmaster exhaust already on it. Now, ive always planned on Kooks long tubes, kooks x pipe with gutted cats, and then a SLP Lm2 Catback.The cat back is all im gong to focus on at the moment, and Ive been going through the...

Hey there guys, looking to see if anybody knows where I can pick up a set of these wheels? I live in Manalapan, NJ, and have been having a hard as hell time trying to find these. The reason for the rush, is a found an 01 Cobra im buying shortly, and the tires are almost as bald as slicks, so I...