Separate names with a comma.
Thanks. Order placed
My current exhaust gaskets are four port 2C5E-9448-AD.
I'll take 2 of these and the 2 oxygen sensors
I need 2 front oxygen sensors and exhaust manifold gaskets for a 2001 Cobra.
Can I get a price on a Iac valve, throttle position sensor and a passenger side window switch?
This is for a single hellion kit
I replaced the engine harness with the motor still in the car. Its pretty tight behind the motor with the new fuel system and I didn't pay...
I did an eaton swap about 7 years ago. After two years I took off the eaton and put a KB 2.2 on it. At the time I modified my stock harness for...
Can you pm a price on a spec 3+ with 8 bolt steel flywheel and a liberty 26 spline input shaft with shim kit.
I bought a set of billetflow pulleys over two years ago. I has a problem with one of the pulleys and e-mailed Doug to see if anything could be...
My company required that everbody that drives a company vehicle get a cdl. This includes trucks like f-250's. I was told that a breathalizer test...
I want an 11.99 et. I think I have the trap speed for an 11.99. My best et is a 12.2. My best 60' is 1.9. I'm on 315 nittos but have brand new 275...
What rpm would you launch a 01 cobra with flsfc, irs brace and 275 et streets? Drop the clutch or slip it?
Can you use the same pulleys from an eaton on a kenne bell 2.2?
Can you use the same pulleys from an eaton on a 2.2 Kenne Bell?
Can you use a snow boost cooler with a eaton or kenne bell? Some people say that the water wears on the rotors/screws. Anybody shed some light on...
Can anybody help me with a couple of questions?
On the bottom of the lower intake there is a vacumn hose, what does it attach to? On the egr tube...
I'm installing the 03 cobra pump assy in my 01 tank. The white plastic basket that is attached to the bottom of the tank do I take that out? Need...
Can anybody tell me what sensor is on the back drivers side on a stock eaton behind the boost bypass valve and egr