Separate names with a comma.
All good points, your set up is different, I had not thought about the need to measure it coming in due to the MS3. I can certainly see the...
I saw that, I almost went that way but I just put it inline on the return side, mines dead headed. I don’t see any reason to complicate it,...
If it was accurate I’d agree. I’m hoping we can sort it out with an update or a new sender or something. I can’t imagine this is normal for...
I have an innovative motor sports ethanol gauge and it’s off by as much as 13%. I wouldn’t waist my time there until they get it figured out. I...
GTpower01 couldn't find his unit, I'm still looking. Will pay top dollar plus $100 for one of these units, especially if never installed.
Kyle, I 100% want this. Please let me know ASAP! thank you
OK, I finally figured it out! The U-joint on the steering shaft was making contact with my LT headers. I spent about 3 minutes adjusting the...
Cash in hand, if you have one please let me know.
Hey guys I’ve been using a hand vacuum/pressure pump to test my vacuum lines. Everything behind the glove box holds pressure except the line...
Good to know, I orders some belt dressing, I’ll give it a shot.
I just put a new RPM belt on it, no change. I'm wondering if It's not some kind a damaged clock spring. I can't recall the last time I tried the...
I'm all for spending money on our hobbies, but if the car is being stored indoors why spend so much on a car cover? I honestly have 2 Autozone $36...
I will check this tonight, I'll test it on the ground and on jacks to see. Thank you guys for your assistance.
I unhooked the cranks sensor and attached a tube to the return line from the pump then cranked it while keeping the tank full of new ATF. The...
I can feel this when turning my wheel around 10 O’clock. as well as hear it from inside the cab. When I try and listen from under the car or the...
I’ll take it.
OK, so I pulled the #5 COP out my vert and put it in the #1 spot bam, everything started to work. The SES light isn't coming on and the raptor...
No I’m pulling power from a seperate independent fused source right off the battery. Trying not to tap into anywhere I don’t need to. The car...
I’ve recently tried installing a raptor shift light into my center vent. After testing, no joy. It’s their 4 wire unit with launch. I’ve checked...
Dang, wrong section. Could one of the mods move this to the engine/tuning section?
Hey guys my cobra needs new belts and I’ve got an extra metco auxiliary idler. Cobra currently has a Whipple adjustable idler. Other than trying...
I’ve got a 03 DSG vert with 13,000mi. Not in any need or hurry to sell, but may let it go now that I’ve also have a built coupe in the garage....
That barylium orange would look pretty cool too. That would be a nice one if done mat. I may be slowly changing my mind.
That will look nice. I realize that red and blue aren't complimentary. That's what I'm going for, I want the contrast.
Dang guys, everything posted up looks good and I’d be happy with all of them. I’m still looking, trying to decide. I like the red and blue...
