Search Results

PULLEY PURCHASED. I am in need of a 2.6" VMP blower pulley for my 2003 Cobra. If you have one for sale, please call or text Joe @ 913.244.3829. TIA

Ok, here is my dilemma regarding my 61k mile T56 that recently started grinding going into 6th gear, and on occasion, won't come out of 6th unless...

I have 2 Walbro (part # 0000128) GT Supercar pumps for sale. They were installed in my 03 Cobra and used for a very brief amount of time/miles....

I'm pulling my tranny this winter to have some issues with going into 6th gear addressed. I already have a 26 spline input shaft. What other...

I am looking for any info regarding the new AEM 320LPH fuel pumps that are e85 compliant. I recently ran into issues of not having enough fuel...

I'm looking for my brothers in SVT to lend me their ears by sending me their cell/phone number so I can talk them through a fuel pump wiring...

I need to know what each wire on the factory fuel pump wiring harness (connector) go to? I have fuel pump issues, and found wires cut on the OE...

Does anyone happen to know the actual inside diameter of the OE fuel feed line that runs up to the fuel rail? How about the inner diameter of the...

Is it normal to see 190 as a TPS value engine off, key on? What about a .05 fuel pump duty cycle with engine on at idle?

I'm having issues with the fuel system providing too much pressure to the rail at idle (60-62 psi). Today I figured out that the pumps are...

Can you use the stock fuel feed line as either the feed or return line? Is there a way to use the OE fuel rail with a return system? What size...

I have ~13.3v at idle and am chasing issues with too much fuel pressure (55-60 psi) also at idle. If I remove the vacuum line from the FRPS it...

Ok, I'll try to simplify this issue the best can so hopefully I get some good advice. Here lately I've been having a hesitation/popping issue...

I looked and cannot seem to locate the actual gear ratios of each gear used in the T56 found in the 03-04 Cobra. I need a quick response that...

Who else sells parts for the T56 other than D&D?

Do the SSP cars have the same amount of blades on the cooling fan as a non-SSP car? How about a SSP specific cooling fan clutch?

When I'm running the A/C and accelerating, the air will not come out of the dash vents. Now, when I let off of the gas and the car goes into a...

I'm looking for a set of foxbody notchback quarter glass/windows that has good rubber gaskets around them. If the gaskets are not in really good...

I'm looking for someone to rebuild the T56 out of my 03 Cobra, preferably in the greater Kansas City area or surrounding states if need be. Names...

Ok....I'm going to keep this thread as short and to the point as possible, but I need professional/knowledgeable info immediately.....with that...

I called the owner and spoke with him directly about the issues I'm having with mine and he sent me revised directions to walk me through the...

To begin with, the forum search function was not working tonight when I started this thread, so I was not able to search previous threads about...

Since the federal government tax incentives for the production of e85 have expired, are you all seeing more or less stations in your area carrying...

I'm fully aware that it's near impossible to bid a job without seeing it, so I'm merely asking for a general ball park type estimate to get an...

I have the OE mid pipe and Ford mufflers, so all I need are the OE Ford tail pipes that would have come on my 1993 coupe 5.0 back in the day. If...