Passenger side isn't all that bad to remove bolts .
I found raising engine up as far as you can will help for top bolts ,you will be able to see them vs feel for them
I have BBK 1 5/8 not sure if these are easier being thinner ,
I didn't have luck with Dewalt,
Milwaukee was much better,and worked better with larger battery,,
I'm still hesitant being these have changed so much ,
To stock pile one brand
But when I used a battery chain saw and weed Wacker. The battery was so nice. No issues starting and weed Wacker...
ford manual has all the information needed ,
Will show what line does what and when .
I don't recall air blowing when in off.
our tundra is different, always blows air unless you hit recirculation button ,
Heat is always on being flow never stops ,this door here may be issue ,
Google svt...
Who did the fuel pump?
Being a miss and falls flat.
Fuel filter is another,,
Assuming it was done with pump,,
I know sometimes it's a pita to get off,,chance something like this happened? Looks clean on outside,,
Will not set engine light,
Coils getting weak.
Same thing. Intermittently...
Hard to say,,
Vent rattle/squeak is my first thought,
I have a tooth pick in mine,,
There is somewhat of a fix on site,
Amazing how it can be so loud and quiet with a touch in 1 spot
I would revisit the lower intake hose again ,and pcv hose and elbows ,,
It's the only area to throw both banks lean ,
Google
03 cobra vacuum hoses documented. Pdf2 has full vacuum harness detailed.
Routing of hoses maybe,
Clogged or restricted hose.
Vacuum harness is small and can be...
Tank is known to crack on bottom. .when in hand you will see it.
New tank is due,,
Got mine off site vendor page ,
Recall it was fairly cheap at time ,,
After my search I also seen all v8 use this fan
I done the sve 3 core
Added 170 deg tstat.
My Temps are now lowest I've seen new .
I do notice heat isn't as hot when cold weather comes.
When at speed. 180 deg in any weather ac or not,,
Ground from battery terminal to radiator support..
I upgrades this.
Mine burned inside casing.
This helped me alot.
Svt documents has service manual and wiring for us.
Both small cell version and large version for PC.
I've been pushing for 18yrs
1 1/2 arces ..
Finally got a zero turn.
Last summer at the end.
Lowes had a major sale
I got the Arians apex 52.
Was 5300 and was tagged 3200.
It's extremely over kill but sure beats pushing.
Kawasaki 23hp
5 in tall 10guage steel deck.
Over sized wheels...
Looks awesome,,
To me it needs something on heat exchanger to finish off the nose,,
Chrome cobra rear Inserts on rear.
How fat did you go on rear tires ?
https://www.k12academics.com/school-shootings/history-school-shootings-united-states
Guessing this has been a bigger issue than thought,
I did 70s/80s for school..
Kent state was about the most spoken about.
After I've dealt with these codes on mine.
I'm sure it's a vacuum leak.
Most common area is the pcv line ..
Pcv valve,,elbows on this line crumble ..
At the bottom of lower intake is where I found my issue.
The hose will harden over time
The hose will not pull off nipple but will spin...
I live 80 miles from this.
Our news says he was in custody, Than claim he was killed.
Kinda hard to investigate now.
But like others posted.
It's the blame game vs actually finding answers
To a demented person.
Seeing the authorities being awarded and praised for killing
May be the...
It's a sad day here. We live 2 counties away ,,
Trying to understand how to stop what and why.
Our biggest thing is why did the police shoot and kill him.