Separate names with a comma.
Pull the fuel pump or ecu relay under the hood.
If it worked previous to removing the alarm system, I'd recheck your work there. It's possible the valet mode is still engaged. It's easy to...
The biggest thing that will help stop belt slip is a bigger crank pulley and a griptec pulley.
Here's the bracket, I have. I assume it's a gen 1 since it has a metal idler and the front boss is part of the bracket.
Do you have a pic of the gen 1 setup?
Make sure your spacer isn't stuck to the bracket. That's where mine usually is.
Get a mechanical boost guage and watch it when you go WOT.
Verify that you aren't getting boost then figure out why. If you think you aren't getting enough boost, the gas smell could be from running rich...
I'm hoping @LethalBlake will have a good one. I need some stuff.
What's the best app to buy crypto with?
Cool. Can you move the Pennzoil thread back into this forum then? @me32
Was there a problem with the Pennzoil rebate too or just the Pep Boys thread?
Here's one link:
Save With a Rebate
Here's the other:
Shell Rotella Gas Truck Full Synthetic Engine Oil, 5W-30, 5 qt. | 2194109 | Pep Boys
I posted a thread about a Pep Boys' oil deal and a Pennzoil deal and they are gone. What's the deal? @SID297
Who made the kit? Do you have any pics of the clearance by the A/C? What k-member does it use?
Does anyone have a datalog file for the nGauge they can share with me?
My idler is 2.5" high and 1.125" wide.
I have an idler between the alternator and ps pump. It is an 8 rib spacer combined with the 96-99 stud mounted sc idler pulley and standoff.
If you're going to try this method, put the stock bolts in backwards and push them out with the new bolts. I can't remember if the catback needs...
This is the easy method: Get the IRS installed with the factory hardware then remove the bolts one at a time and replace them with the bigger...
One thing that might need to be stated about thumping on the tank is that usually someone needs to be attempting to start the car for it to work.
I have the current light about 20' up on a pole and am using it as a security light for my barn and the surrounding area. I'm hoping to find an...
I'm going to replace the entire fixture. I'm trying to determine 2 things: 1)equivalent brightness, 2)how much area does it light up.
Does it illuminate the same amount of space as the old lamp did?
Title pretty much says it all but...
I have an old transformer powered 175W mercury vapor lamp that has died and most of the replacements I find...