Search results

  1. RRRR03Cobra

    WANTED: WTB Stock Shifter

    I found one. Thanks.
  2. RRRR03Cobra

    Got a Gremlin, any help would be appreciated.

    Good day bros, So I installed a Whipple 2.3, 2.8 upper pulley, 60lb injectors, Mafia, JLT CAI, Accufab TB, and a KB BAP. A few weeks ago, my tuner sent me a tune to drive on until my dyno appt. The car at this point ran fine. I didn't get in to boost because I was breaking in a new clutch. In...
  3. RRRR03Cobra

    Idle Issue After Whipple Install

    Good day guys. I just installed a Whipple 2.3, Accufab TB, 60lb Injectors, KB BAP, Mafia on my 2004 Cobra. I also installed some NGK TR6IX. My tuner sent me a run tune until I can get the car to him next week. The thing is, I don't want to drive 2 hours only to have something wrong with the car...
  4. RRRR03Cobra

    Whipple 2.3 Pulley Question

    I've been out of the Terminator game for about 10 years. Since selling my last Terminator, I've had three Shelby's and one Hellcat. I decided to go back to a Terminator a few weeks ago and bought a mystichrome vert. I picked up a great deal on a Gen 1 Whipple 2.3. I have all of the supporting...
  5. RRRR03Cobra

    WTB: VMP or Whipple 2.3

    Found one!
  6. RRRR03Cobra

    2003/2004 Cobra Parts

    Everything sold!
  7. RRRR03Cobra

    2013 SVTP Shelby GT500

    Decided to keep!i
  8. RRRR03Cobra

    WTB. PORTED SUPERCHARGER

    Any ported chargers for 2003/2004 Cobras for sale? Thanks.
  9. RRRR03Cobra

    WTB: MGW Shifter

    I'm looking for a MGW shifter for my 03. Thank you.
  10. RRRR03Cobra

    WTB: 13/14 Trinity TVS

    Found one! Thanks
  11. RRRR03Cobra

    Airbag light question

    I swapped out the factory seats in my 2013 GT500 with 2011 Boss 302 Recaro seats. The airbag light is now on. Has anyone figured out how to get this airbag light off without changing over the airbags? I sold my factory seats to a buddy of mine. Thanks!
  12. RRRR03Cobra

    Header Question

    Do you guys think long tube headers are worth the price? And I have heard to use AR or Kooks. JBAs look about the same?
  13. RRRR03Cobra

    VMP TWIN 72MM THROTTLE BODY

    I'm selling a mint condition VMP Twin 72mm throttle. You will need a tune in order to run this TB. This will fit any 2007 to 2014 GT500. I will take $450.00 shipped for it. Thanks!
  14. RRRR03Cobra

    2013 gt500 intercooler pump help!!

    Very similar issues. Under wot, the ect angle on the tb wouldn't go above 35°. With the car sitting and the engine off, it would hit 82°. So after putting 2 different throttle bodies on the car, this didn't solve the issue. So I datalogged it with my laptop. Found the IAT2 temp to be 235°! The...
  15. RRRR03Cobra

    Throttle issues

    I bought a 2013 Shelby GT500 a couple of months ago. So a couple of weeks ago, I installed a metco 2.4 upper pulley, twin 65 mm Cobra Jet, and a lethal off-road H pipe. Well I took it to the dyno to get tuned and for some reason the throttle body will not open up all the way under wide open...
  16. RRRR03Cobra

    Throttle body issues... Need help

    I bought a 2013 Shelby GT500 a couple of months ago. So a couple of weeks ago, I installed a metco 2.4 upper pulley, twin 65 mm Cobra Jet, and a lethal off-road H pipe. Well I took it to the dyno to get tuned and for some reason the throttle body will not open up all the way under wide open...
  17. RRRR03Cobra

    Seat Question?

    I found a set of leather recaros out of a 2015 Mustang GT Track Pack car. Will they fit in my 2012 GT500? Has anyone done the swap? Thanks guys :-)
  18. RRRR03Cobra

    2012 SVTPP SHELBY GT500 $38,500

    Decided not to sell:)!
  19. RRRR03Cobra

    Back Stock Sale :))

    Decided to keep the Shelby :)
  20. RRRR03Cobra

    VMP Twin 72mm Throttle Body Issues

    Last month, I installed the new VMP Gen 2 Supercharger and a 2.4 upper,a L&M Twin 72mm tb, Steeda 130mm CAI, 2014 Shelby Injectors and a high flow H pipe. I took and had the car tuned a couple of weeks ago. All of the numbers were where I expected them. On the way home from the dyno, I noticed...
  21. RRRR03Cobra

    Fs: L&M Polished Twin 72MM Throttle Body

    I am selling a mint condition L&M polished twin 72mm throttle body. This thing flows over 2400 cfm! I will take $450 shipped. EATURES ON THE L&M DUAL 72MM THROTTLE BODY (1) Twin 72mm , CNC machined from billet aluminum to ensure consistency. (2) Includes electronic controlled Delrin Plastic OEM...
  22. RRRR03Cobra

    Throttle Body Issues

    I just installed the new VMP Gen 2 and love it!! I also installed a L&M Twin 72mm throttle body when I did the upgrade. While driving the car at low throttle, the car surges? Soemtimes the idle hangs when I let off the gas. I can also see the boost guage move up and down a little when it is...
  23. RRRR03Cobra

    FS: VMP 2.4 Pulley with Hub for TVS, Brand New VMP 2.5 Pulley for Eaton

    I am selling a VMP 2.4 pulley with hub that will fit a TVS. And I am selling a brand new VMP 2.5 pulley for a stock Eaton. I will take $85 shipped per pulley. Thanks!
  24. RRRR03Cobra

    Axle-back Advice

    I installed an off road h-pipe with magnaflow hi flow metallic substrate cats. I had Outlaws on the Shelby at the time. The cats made the exhaust extremely loud! So I have tried MBPR and the a Roush axle-back, with no luck! The Roush was just as raspy and obnoxious as the Outlaws. So I installed...
  25. RRRR03Cobra

    WTB: 2013 Mustang Taillights

    I am looking for a set of 2013/14 Mustang Taillights. Thanks!

Top