Search results

  1. cj428mach

    03 Cobra Speed Sensor Location ???

    I'm not sure what the speed sensor would have to do with your tach. I think you're having cluster issues.
  2. cj428mach

    What did you do for your Terminator today?

    I drove the Terminator all friggin weekend. I burned through about a tank and a half of E85 but that doesn't mean I went far because I saw a lot of boost. Gave my dad his first ever ride in it and then later I took my old 4th gen Fbody buddy for a ride in it. He loves the torque and the blower...
  3. cj428mach

    What did you do for your Terminator today?

    On monday I brought the terminator home from my shop where it had been in storage. I hope to get it out and start driving it soon.
  4. cj428mach

    Hellcats?

    I think Malcolm was in the 800rwhp range back then and if I remember right it wasn't even close.
  5. cj428mach

    FOR SALE: 2004 Screaming Yellow Cobra

    I really screwed up not going with SY. Good luck with sale.
  6. cj428mach

    FOR SALE: VMP gen3R 2.65 TVS supercharger , ID1050 injectors , IW crank pulley

    Dang I missed that and that's one of my pet peeves, sorry. Just cause it's new in a box doesn't mean it's the newest setup, but in this case it clearly is. Glws
  7. cj428mach

    FOR SALE: VMP gen3R 2.65 TVS supercharger , ID1050 injectors , IW crank pulley

    Is it a standard Gen 3?, ported Gen 3? or Gen 3R?
  8. cj428mach

    Boost levels & times on a VMP 2.65

    I really wish you would have slapped on that ported Gen 3R on your car......its a shame.
  9. cj428mach

    Any HVAC guys or multiple story home owners in here?

    Thanks for your reply, the fan in the duct work idea wasn't really to boost performance of the cold air out of the AC vents. It was to create a pathway between the top and bottom floor of my house that I could begin to circulate airflow with since the room below the master bed room is probably...
  10. cj428mach

    Any HVAC guys or multiple story home owners in here?

    I'll read up on that for future long term improvements, how does it install? And by that I mean the duct work/valving? I really don't want to be knocking holes in the wall to run new ducting. My house has central heat and air so there is ducting through out the house already its just the temps...
  11. cj428mach

    Any HVAC guys or multiple story home owners in here?

    I own a split level house and while I love the look of my house the difference in temperature between the levels, especially in summer time can really make it uncomfortable. My house is built similar to this Ignore the floor plan just trying to show the split level and my problem. The problem...
  12. cj428mach

    VMP Intercooler, VMP high flow manifold VMP Triple Pass HX, PNR Trunk Tank, and EMP Pump

    Vmp is a trusted name.......ill leave it at that.
  13. cj428mach

    Harmonic Balancer, Crank Support, Lower Pulley

    The only thing the bushings do is cushion everything while it's turning. The bushings have no effect on if the lower spins straight.
  14. cj428mach

    Driver's side window not going down

    You got it as usual. I tore the door apart tonight and began to remove the motor but it was stuck in there and wouldn't come out. I then turned on the key and hit the window switch and the motor came to life. I tried it multiple times and then put the door back together. The last time I know...
  15. cj428mach

    Driver's side window not going down

    The driver's side window motor in my 03 just quit working out of the blue the other day with 14,Xxx miles on it. When I hit the switch you hear a clear click like the switch is making contact and my lights will dim so I believe it's the motor not working. Years ago when the car had sub 10000...
  16. cj428mach

    TKX

    The cases can crack, they also can leak out the front plug.
  17. cj428mach

    TKX

    I wish I had one of these in my 69. I put a TKO600 in at the time because its what everybody said to get, but it leaks oil out the front somewhere. I then started doing research on them an there are a lot of problems on TKO600's naturally no one ever mentioned them in the years I had read about...
  18. cj428mach

    Owners with a 4 post lift...

    I can't answer what ramps are on my 4 post but the ramps but the top lip of the ramps will bang on the bottom of the rockers of an 03 cobra when driving on it. I put some 1" x 12" boards under the front of the ramps so it keeps the lip of the ramps down at the back and makes for a more gradual...
  19. cj428mach

    GIVING UP on Kooks LTH's - They sag and being 2 piece leak like crazy

    I did mine on my 2 post lift and I'd say it took about 6 hours start to finish, dropping the Kmember. I'd work on it a little bit after work each night and it wasn't bad at all. Honestly it was one of the easier header installs I'd ever done, definitely better than my big block 69 mustang or my...
  20. cj428mach

    GIVING UP on Kooks LTH's - They sag and being 2 piece leak like crazy

    If you need an engine support bar, I have one you can borrow. I just need to get it back from my buddy that used it.
  21. cj428mach

    GIVING UP on Kooks LTH's - They sag and being 2 piece leak like crazy

    Bassani's have the same slip fit primary/collector setup that your kooks do. I went with these JBA 6635SJT: JBA 6635SJT Long Tube Headers 99-04 Cobra 1-5/8Titanium Ceramic They're stainless, and no slip fit connectors, they also have the O2's in stock location so the delay in reading doesn't...
  22. cj428mach

    2.65 TVS question

    I think the 3.4's were like 2800 and the gen 4 was a bit more, or maybe the Gen 4 2.9 was 2800 and and the 3.4 was 2400. Either way they were cheap and I kick myself for not buying some to resell. I could have made a few grand in a month or so time.
  23. cj428mach

    5.8 GT500 Trinity heads on Cobra 4.6 block???

    I'm not on facebook anymore but when I was on there I saw a guy that was welding up the ports on an 03 Cobra intake and moving them to work with the GT heads.
  24. cj428mach

    Reproduction Door Tag Stickers

    I guess it bothers me because my 14k mile car that's always garaged has the sticker peeling and my 310k+ mile f150 of similar age and never spent a day inside has a perfect sticker.
  25. cj428mach

    Base Tune help

    Set fuel pump voltage table to 13v.

Top