Search results

  1. T

    2019 Mustang GT superchargers

    Has there been any discussions about supercharging(or similar) for the 2019 GTs? I don't see how on a static compression 12/1 engine. Any thoughts?
  2. T

    Kooks Long Tubes Install

    Will let you know. Thanks.
  3. T

    Kooks Long Tubes Install

    Thanks. Haven't seen you around lately. Ok. I will remove the plate. A couple of you guys have mentioned this, so it's time to do it. It's easy to see up against the firewall. Will let all you guys know what happens. Thanks.
  4. T

    Kooks Long Tubes Install

    Sorry for the message I just sent you. I did see now that you already gave your input. Thanks.
  5. T

    I see you're online now. Did you possibly look at my post in the Terminator forum regarding...

    I see you're online now. Did you possibly look at my post in the Terminator forum regarding exhaust? Trying to install Kooks long tubes or JBA shorties. Can't budge the steering shaft to move it out of the way. Any ideas?
  6. T

    Kooks Long Tubes Install

    Thanks for your info. I did see the dust boot, but didn't remove it yet. I have the lower pinch bolt off(13MM) and the upper 10MM pinch bolt. My issue is that even with both ends disconnected, I can't budge the damn shaft either way. I can't see where to remove any bolts holding the shaft to the...
  7. T

    Kooks Long Tubes Install

    Hello all, I am installing Kooks long tubes on a 2004. I also have JBA shorties. I have everything off, exhaust, trannie and bellhousing out, motor mounts out, etc. I know you're supposed to remove the steering shaft. I have the 13MM lower pinch bolt off, as well as the 10MM under the dash. I...
  8. T

    Think I'm done with Ford products

    One dealer does not make or break a brand. If your needs have changed, that's OK. Have your new luxury brand, and have fun with your Mustangs. Sent from my 2PS64 using the svtperformance.com mobile app
  9. T

    Help with PCM fuse that keeps blowing Electrical Issue

    You are correct. That's a diode test function. You can't test a diode with a resistance mode, unless it's dead shorted.
  10. T

    Do they listen.........

    Thank you.
  11. T

    Do they listen.........

    How do you turn off the Mike in FB? I don't see an option for that in settings. Sent from my 2PS64 using the svtperformance.com mobile app
  12. T

    Looking for experts on T-56

    Got the syncro back together without pulling the trannie apart. Now just looking for one lousy snap ring. Sent from my 2PS64 using the svtperformance.com mobile app
  13. T

    Help with PCM fuse that keeps blowing Electrical Issue

    Hello all. Somehow, I couldn't seem to find this thread again. That's why you haven't heard from me. It seems like you've got plenty of help, but if you need me, I'll be around. Too many cooks spoil the stew. Sent from my 2PS64 using the svtperformance.com mobile app
  14. T

    what the heck is this special ground behind the head below the valve covers?

    I looked at mine, and you probably are right. The picture you linked to says capacitor. I was thinking of the braided line that looks like the one attached to the ground on the hood blanket. Completely different. My apologies.
  15. T

    what the heck is this special ground behind the head below the valve covers?

    Sorry. I can't see the clips on the picture, at least on my cell. If we're talking about lines that are hot, they aren't for RFI, so my apology. RFI suppression lines would be braided, not just a regular stranded wire. I'll correct my post on the others (fuse blowing) posting.
  16. T

    Help with PCM fuse that keeps blowing Electrical Issue

    That's OK. If you pull the PCM relay, that effectively unloads the output of the relay. The voltage pins from the relay, not the coil and ground, can't be shorted to ground. Try pulling the relay first, and let us know if the fuse still blows. On another note, and I almost hate to bring it up...
  17. T

    Help with PCM fuse that keeps blowing Electrical Issue

    Does F-2 or F-8 blow? I'm guessing not. F-26 feeds the PCM relay. See if removing the PCM relay stops F-26 from blowing. That will tell you allot.
  18. T

    Help with PCM fuse that keeps blowing Electrical Issue

    OK. Here's the skinny. F-21 is the actual B+ fuse, 5A for the PCM. On pin 55, you should see 12V. You must have ground on pins 3, 25 & 55. The PCM will definitely not like an open end to a 30A fuse. Fuse 26, a 30A fuse, supplies voltage, and passes allot of current to other items that are inputs...
  19. T

    Help with PCM fuse that keeps blowing Electrical Issue

    Yes. I have the cell one and the PC. I haven't look at the PC version yet. The one on the cell has no TOC. You have to sift through every page. That's why I figured my copy was somehow missing some pages. OK. I'll look at the pages above. I'm done with my Terminator today. Man was it hot. We...
  20. T

    Help with PCM fuse that keeps blowing Electrical Issue

    Guys. Is it just my copy of the service manual, but I can't find a table of contents, etc. Am I missing something? I'd like to see this fuse, input to it, output from it, without looking through 4000+ pages.
  21. T

    Help with PCM fuse that keeps blowing Electrical Issue

    Yes. Please let us know exactly what the fuse number is, although from your description, it can only be one. I keep forgetting I have the manual too.

Top