Search results

Just want to say thank you to BJ at VMP. I recently ordered a custom tune with expectations of 5-10 business days as per the website. I'll just say it was much faster and he even was available for a few questions after the fact. Thanks again for great customer service now to do some installing...

After the MGW install on my 2011 GT500 I have absolutely no 1-2 grind. I can slam 1-2 with no hesitation needed to avoid the grind like before. It's like a completely new car. For what it's worth during the install you can set the turns on the base of the shifter to adjust shift distance...

Well after working too many hours i grazed the curb leaving the parking garage from work. Any suggestions on repairing?

I recently purchased a 2011 Shelby that had a pulley, KN cold air, 170 thermostat, and devils own methanol kit. The car also was supposedly tuned by you guys and has the SCT tuner with your VMP sticker on it. Is there anyway for me to either give you the serial number off the tuner or message...

*****SOLD***** Corsa Part Number 14321 Was on my 2013 GT. Like New only on car 3 or 4,000 miles. Took off before trading in on a 2011 Shelby. Would keep but have to change my whole back bumper and tail lights. This is the GT500 Quad tip Corsa Sport Axle back. Will even fit the 13+ 5.0 cars...

*****SOLD***** Corsa Part Number 14321 Was on my 2013 GT. Like New only on car 3 or 4,000 miles. Took off before trading in on a 2011 Shelby. Would keep but have to change my whole back bumper and tail lights. This is the GT500 Quad tip Corsa Sport Axle back. Will even fit the 13+ 5.0 cars...

2003 SVT Cobra 53k miles Visual Upgrades: Redfire Clearcoat Metallic w/ custom flames painted by Airbrush by Von Otto Custom painted cobra on underside of hood Custom painted Cold Air System Car lowered 2 inches all around Dual Autometer Gauge Cluster w/ AF Ratio & Boost Gauges...

Deleted .

i have a brand new never been used still in the original package not even opened Kenne Bell Boost a pump for sale. i am located in texas and will drive and MEET people in the Dallas or Austin, TX areas. I can also ship this item but i will need a money order sent to me first. I am asking $250...

I just wanted to stop for a second and let some of my fellow Texans and surrounding people know about a Speed Shop I recently did business with. About a month ago my car went down needing new rings and pistons(22% blowbye in a few cylinders and 70% in another and thats just one side). I was...

I just wanted to stop for a second and let some of my fellow Texans and surrounding people know about a Speed Shop I recently did business with. About a month ago my car went down needing new rings and pistons(22% blowbye in a few cylinders and 70% in another and thats just one side). I was...

To Stiegemeier, I worked in one of the largest mustang retail parts companies out there and was always used to keeping up with a high level of customer service. I was almost spoiled by the level our company maintained and have never gotten anything close to that level of customer service...

some of you got to read about the problems i was experiencing after adding the 4lb lower to my 2.80 upper combo. if not and you want to here it is: http://www.modularfords.com/forums/...72271post172271 anyway last thursday during the day i did some datalogging and my IAT2 temps were...

whats the address, sorry for the stupid question but the search as you know is down for the moment.

whats the address, sorry for the stupid question but the search as you know is down for the moment.

so is anyone going to the Midnight Madness @ SAR the 10th. a bunch of buddies of mine are going and i am trying to get some nice 10 second slips just wanting to see if anyone else is going

you guys with the predator programmers. i was talking to another terminator owner and i started to wonder. how much fuel have you had to the regular pulley tune and what were your mods.

The dyno day will be held at DC Motorsports in waco, tx. This used to be Nitro Daves Performance. It will cost $50 for 3 pulls with Air/Fuel and this is on a Dynojet. It will begin at 9am so if you can make it please come. here is the address if you need directions: DC Motorsports 3000...

The dyno day will be held at DC Motorsports in waco, tx. This used to be Nitro Daves Performance. It will cost $50 for 3 pulls with Air/Fuel and this is on a Dynojet. It will begin at 9am so if you can make it please come. here is the address if you need directions: DC Motorsports 3000...

The dyno day will be held at DC Motorsports in waco, tx. This used to be Nitro Daves Performance. It will cost $50 for 3 pulls with Air/Fuel and this is on a Dynojet. It will begin at 9am so if you can make it please come. here is the address if you need directions: DC Motorsports 3000...

The dyno day will be held at DC Motorsports in waco, tx. This used to be Nitro Daves Performance. It will cost $50 for 3 pulls with Air/Fuel and this is on a Dynojet. It will begin at 9am so if you can make it please come. here is the address if you need directions: DC Motorsports 3000...

The dyno day will be held at DC Motorsports in waco, tx. This used to be Nitro Daves Performance. It will cost $50 for 3 pulls with Air/Fuel and this is on a Dynojet. It will begin at 9am so if you can make it please come. here is the address if you need directions: DC Motorsports 3000...

The dyno day will be held at DC Motorsports in waco, tx. This used to be Nitro Daves Performance. It will cost $50 for 3 pulls with Air/Fuel and this is on a Dynojet. It will begin at 9am so if you can make it please come. here is the address if you need directions: DC Motorsports 3000...

The dyno day will be held at DC Motorsports in waco, tx. This used to be Nitro Daves Performance. It will cost $50 for 3 pulls with Air/Fuel and this is on a Dynojet. It will begin at 9am so if you can make it please come. here is the address if you need directions: DC Motorsports 3000...

The dyno day will be held at DC Motorsports in waco, tx. This used to be Nitro Daves Performance. It will cost $50 for 3 pulls with Air/Fuel and this is on a Dynojet. It will begin at 9am so if you can make it please come. here is the address if you need directions: DC Motorsports 3000...