03/04 cobra iron block
03/04 cobra forged crank
Manley Billet I Beam Rods
Forged Diamond Pistons 10.5:1 comp
Total Seal AP Stainless Rings
ARP Main studs
ARP rod bolts
ARP side block bolts
Cometic MLS head gaskets
MMR 7 qt oil pan
MMR windage tray with gasket
MMR pickup...
I have a th400 setup for sale. Was built and had 2 passes on it. Here is what all I have
Neil chance built 1500 hp th400 with deep sump aluminum pan that has been tapped for trans temp sensor, and trans brake
Lokar dipstick
Modified t56 crossmember and rubber mount for the th400
Sfi...
I have the complete Mach 1 shaker setup for sale. Will include all brackets, bolts, drain hoses, cold air scoop, and hood. Also have a brand new hood decal to go with it. All parts are in excellent shape! I also have the engine and trans for sale as well. Message here or text me 785-608-9228
I am looking to buy a DSG 03-04 cobra decklid setup with spoiler and brake light. Doesn't matter if light is broken or not. PM or reply here. Paypal ready now. I can pick up within a reasonable distance or will need it shipped to 66605 Topeka ks. Thanks
I am looking to buy a DSG 03-04 cobra decklid setup with spoiler and brake light. Doesn't matter if light is broken or not. PM or reply here. Paypal ready now. I can pick up within a reasonable distance or will need it shipped to 66605 Topeka ks. Thanks
I have for sale a pcm out of a 2003 cobra. It is in good working order. Took it out to run a fast system. I also have a T56 wiring harness for the same vehicle. asking 225 shipped for the pcm and 115 shipped for the trans harness. YOu can message me here or text me at 785-608-9228.
Up for sale is a Joe van overbeek lift off cowl hood. I have Zeus rails to go with it. Have over 900 in receipts. Sell for 650 picked up in Topeka ks. Also have a 17" racecraft drag wing. It was mounted but I'm going a different route. 475 picked up in Topeka ks. You can message me here or text...
I have a couple harnesses for sale. One is the oem dash harness in great shape and one is the engine harness. Both in great shape. Can text pics. You can send me a pm but texting would be the fastest way to get ahold of me. 785-608-9228
Up for sale is a completely fresh built rear end. It started as a stock 99 gt housing. Had the quad shock mounts cut off and the tubes welded to the diff, has 35 spline moser axles, full spool, 3.90 gears, moser differential cover with cap studs, c clip eliminators, brand new cross drilled cobra...
Brand new QA1 175lb coilovers 94-04 still in the boxes 600.00 shipped
Maximum motorsports caster camber plates 125.00 shipped
Kenny brown extreme matrix subframe x brace system 400.00 picked up 425 shipped.
Maximum motorsports 6pt bolt in cage with swing out door bars 600.00 picked up...
Shooting for around 1100 hp at the rear wheels. What have you guys done to reinforce this area. I was looking at a kit from wild rides race parts. They completely replace the factory ones with thicker sheet metal ones. Here is a pic. What else would you guys recommend??
Building my motor now. What head gaskets do you guys reccomend? Going twin turbo with around 18-24lbs and gonna be shooting for 1000 hp. What head gaskets should I use. Thanks in advance.
Up for sale I have several parts for sale. I will put prices on all that will include shipping. I would prefer not to ship the bigger items so local pickup in Topeka ks would be preferred. I will ship at buyers expense on those items though. I can provide pics of anything through text so feel...
I am looking for a built set of cobra heads. Ported and polished, upgraded valves, springs, retainers, hardened seats, and possibly turbo cams. Let me know what you got. PM or text 785-608-9228
Who has an aftermarket steering wheel in their car with a quick release hub? How did you do it. Any bolt in kits out there available? Lets see some pics of your setup and what parts did you use to do it?
I have a few parts from my terminator for sale.
03/04 Engine harness 185 shipped
03/04 ecm 275 shipped
03/04 cruise control module 65 shipped
03/04 front impact bar 75 shipped
03/04 cobra ps rack in good shape 32k miles 225 shipped
03/04 ps pump and reservoir 100 shipped...
I have for sale a full 1999 cobra irs setup for sale. It will include all components for install including all brakes, cables, brackets, and bolts. Asking 750.00 for it.
Also have a complete cobra brake setup for the front will include spindles, hubs, rotors, pads, calipers, brackets, and...
I have for sale several parts from a 2004 terminator. All are steering/brake components. Here is a list of what I have
03/04 power steering rack 200
03/04 hydro boost setup with lines 175
03/04 ps cooler 50
03/04 ps pump 65
03/04 ps reservoir tank 40
all prices are plus pp and...
I have for sale a set of weapon x coil covers. They are in great shape and have not been used in a running car. They have been used for mach up only. They do require you to use weapon x coils as well. These are no longer available to buy. Get them here. pic is what they look like but not my pic.
I have a brand new set of 18x9 and 18x10 black saleen wheels. They are brand new in box and ready to go. I will also include a brand new set of black locking lug nuts with key. THese wheels have seen no run time at all being they are still in the box. Would prefer local pickup in Topeka ks but...
I have for sale a complete IRS assembly out of a 1999 cobra. It is ready to bolt in. Great upgrade for handling for a gt or v6. Will include all brake components, brake cables, brackets, bolts, everything to do a swap or replace a worn out one. THis unit is in great working order. Prefer local...
What coils is everyone running and what are your power levels. I am looking to push between 1000-1100 and was wondering if my oem ford coils would be fine. Also what is a good set of plugs? I was looking at the autolite AR-93 plugs
I have been doing a lot of looking lately at different setups and there is a lot of conflicting opinions on intakes. I will give you my setup and my intake options and see what you all think.
Engine setup
stock block
stock crank
billet I beam rods
Diamond forged pistons 10.5:1 comp
all...
Looking to get opinions. I am currently building my car up and was wondering what everyone recommends. Go with a big single turbo or smaller twin turbos. This will be a street car that may occasionally see the track. Wondering what will be the better setup. Thanks