Search results

  1. SicilianMobster

    Valve Adjustment

    Im thinking it might need one unless Stainless Steel Valves have a normal "tick" to them. No there is no problem with the head. How hard is it to do a valve adjustment on these cars? Being a built motor would the specs be any different? Thanks ahead of time mods are in sig
  2. SicilianMobster

    First Sandrail GoPro edit. Come give me your opinion :)

    Built her from the ground up had only the frame (had to modify that too) Enjoy! :beer: $15,000 of my life right here :cryying: DONT FORGET TO SWITCH TO HD!!!!!!!!! Hu8RQCNvCbw
  3. SicilianMobster

    Wtf! A/C shut raido down and wouldnt boost

    Driving home today i decided to turn my a/c on. No big deal right? After i hopped on the freeway just driving normal everything is ok. Then just cruising at 70 the radio shuts off.... Wtf? so i hop off on the next exit and the car will not accelerate or go into boost at all. It was cutting out...
  4. SicilianMobster

    Photoshop Request

    Can someone photoshop the calipers painted black with "cobra" in red???
  5. SicilianMobster

    NEWB Need to verify Tune is ok help set up data log

    I bought my car about 6 months ago and I'm scared to drive it (only about 750 miles) because i dont know if the tune is still correct..... I was told by the previous owner that the tune was set really conservative but i just want to verify that everything is ok until i can get it down to AED...
  6. SicilianMobster

    Keeps Popping Injector O-ring on startup

    Pretty much every 5 times i start the car it blows the O-ring on the 1st injector passenger side.... CPR Fuel Rails, Kenne Bell BAP, 60lb injectors. Anybody have an idea why its doing this?
  7. SicilianMobster

    Elevation a factor in tuning?

    I live in Reno, NV (4500ft above sea level) I need my car tuned but there is nobody in the area that i trust w/ a built cobra. SO if i take it down to Sacramento to AED tuning and get it tuned will the tune be wrong when i get back up to elevation?
  8. SicilianMobster

    Elevation a factor in tuning?

    I live in Reno, NV (4500ft above sea level) I need my car tuned but there is nobody in the area that i trust w/ a built cobra. SO if i take it down to sacramento to AED tuning and get it tuned will the tune be wrong when i get back to elevation?
  9. SicilianMobster

    Front tire suggestions

    I need a good dd tire that will last a while. For some reason I can't find the kumho ecsta supra's I have now anywhere. Any suggestions??
  10. SicilianMobster

    Got the datalogging working, which perams to check?

    Just looking to make sure the previous owner had the tune right, i have no clue about any of this tuning stuff so i just need to know which perameters i should check to make sure the tune is ok for the most part. BTW the whole using the laptop in the car this is ****ing AWESOME! :pop:
  11. SicilianMobster

    Just got Datalog working which perams?

    I just got the datalogger working on my 03 cobra and im wondering which perameters i should select to make sure my tune is ok? (different elevation than previous owners)
  12. SicilianMobster

    datalog cable for sct xcal2 question

    I know it's probably a really stupid question but I can't get a hold of sct or lethal. Its the 9pin. Where the heck does the other end of the 9 pin go?
  13. SicilianMobster

    easiest way to fill 2.3 whipple

    ok first question.... What's the easiest way to add s/c oil???? Also how do you know when its full? Thanks in advance
  14. SicilianMobster

    2.3 whipple getting hot

    Ok I have noticed that my s/c seems to be hot to the touch (enough to burn my hand) after only a 15-30 min drive only getting into full boost maybe 1 or two times. My IC pump is working fine so idk why or if it is supposed to be getting so warm.... I have noticed that after going into full boost...
  15. SicilianMobster

    Do these go between the spindle and the bearing

    Do these go between the wheel bearing and the halfshaft? Trying to see if these are something that should be left out or not..... Just had my level 5 halfshafts rebuilt and i dont remember where these go....
  16. SicilianMobster

    Cheapest "Decent" Brakes

    On a limited budget but need some good brake pads for obvious reasons. :burnout: Any suggestions on brands that are cheap but still good?
  17. SicilianMobster

    Any Tuners near reno, nv????

    Looking for some tuners near reno that have some kind of experience with cobras...... being that i bought a HIGHLY modded cobra i dont want to make anything go boom.
  18. SicilianMobster

    Anybody know what Font this is?

    want to do the same thing but will putting that much black paint on it affect the cooling?
  19. SicilianMobster

    PLZ!!! Help My Brother get his Christmas/New Years Present

    Ok so my brother just got married and has absolutely no money left over. He's lucky enought to have one of the FEW Fahrenheit GLI's. He loves his car with a passion and i think we can all sympathize with him in the plight to keep modding. Long story short Integrated Engineering is giving away...
  20. SicilianMobster

    Help! SCT tuner mistake

    Please, bear with me I new with this tuning stuff. me being a dumb@$$ i decided to screw around with the tuner about three weeks after i bought the car. AFR's were right around 10.9-11.2 at WOT. Now they are running at like 12.4-13.3 w/ the 3.5 pulley..... It has a pre-loaded tune on it for a...
  21. SicilianMobster

    WTB Whipple Pulley's

    3.25 is what im looking for
  22. SicilianMobster

    Any decent tuners near Reno, NV?

    Looking for a tuner in the reno/sparks area that has atleast some experience w/ terminators.
  23. SicilianMobster

    Blowout + Median + Need New Front bumper

    Title says it all...... Anyone know where i can get a QUALITY front bumper at a good price. Ford wants 819 and Tousley discounted down to 513. Anyone know of a cheaper place?
  24. SicilianMobster

    Aftermarket hub Assembly toast

    Come to find out that both of my rear wheel bearings spun and broke apart and the hubs are shot. I went down to ford and got a factory replacement hub just to find out i have upgraded half shafts. I think the guy i bought it from said they were built to stand 900hp so im assuming they are level...
  25. SicilianMobster

    Winterizing the cobra. What do i need to do?

    What fluids do you suggest i swap out. Temps here can sometimes get into the -10's :whine: Also im wondering if any of you use Sta-bil? First winter w/ the termi dont want to mess anything up by freezing it

Top