Took my 2018 ESS supercharged 18 to the 1/8 mile track today. Ran a 6.25 @ 119 1.49 60ft . Stock motor, stock trans , stock converter and stock axles.
Mods
ESS G3 supercharger 11psi
GT 350 manifold and 87mm tb
LTH catted long tubes
1050x injectors and vmp bap
Tuned by OZ tuning
E30 for fuel...
Ran my 2018 F-150 4x4 crew fully loaded with pano roof. at the local 1/8 mile track. It ran 8.27 @ 86.99 and 8.28 @ 86.76.
Truck has 3.55 gears. Mods are ported 18’ mustang intake, pmas cai, mak y-pipe, and oz flex tune.
All runs were with my son riding shotgun and da was around 900ft. With...
Ran my 2018 F150 4x4 fx4 3.55 gear dual pano roof truck in the 1/8 mile
Mods
Omega tune running e85
Pmas cai
2.5 leveling 2”block rear
295/60/20 ridge grapplers 25lbs heavier each than stock tires
I was very impressed with the time considering my son rode with me and my truck is heavy crew...
I have 95 Cobra with following mods.
331
AFR 165
Performer 2
x -cam
Vortech v2 2.95 pulley
Anderson power bypass with mondo blow off
New SCT BA 2600
accel 48lb injectors
255 in tank
Moates Quaterhorse tuner
New 02 sensors
Car runs great idle , cruise (14.6)and WOT (11.7)are all...
WTB 03/04 Cobra seats in great shape 10th ann., 03 light, 04 dark just not tan or mystic inserts. I'm in N. Alabama. Wiling to pay shipping.
Thanks
Brad
Well I just picked up a 03 Cobra black , bone-stock with only 16000 miles on her. I bought a 2004 Cobra brand new did all the basic mods and ended selling it. I've kinda regret it ever since. I've been through a 02 Z06, 07 Z06 and 97 vette. Now I finally back at home in the 03. I just plan on...
Just bought a 03 Cobra Friday 12/23/11. The car came with tri-ax shifter that the previous owner said it had less than 1000 miles on it.
I'm selling it because I have a MGW shifter from my previous 04 Cobra I had.
$105 Shipped
Thanks
28x11.50x16 et streets with Black American Racing wheels (perfect offeset for lightning or Harley truck. The et streets have about 15 passes on them 350 shipped!!
Thanks
Brad Morring
Went to a streetcar shootout today at Steele, AL. I usually run 1/8miles and this was a chance to run a 1/4. This was my 4th ever running a 1/4 track and the temp well was HOT enough for me to get sunburned. First pass was my best :
60ft 1.714
330 4.777
1/8 7.274
MPH 98.90...
Well I wanted to be the fastest stock blower, stock IRS, stock clutch Cobra. But it's not going to happen.
First pass went a 7.24 @ 98.48mph 1.699 60ft. I let the car and clutch cool for a while and went my new best:
60ft 1.665
330 4.699
1/8 7.180
MPH 99.01
It's...
What is the Fastest stock Eaton, Stock IRS, and no NOS car in the 1/8 mile??
Most tracks around here are 1/8 mile. I've finally got some good air to run in tomorrow night. I'm thinking I can go 7.0's 7.1's with a decent 60ft. But it is just internet racing I want know til tomorrow.
Well I know it isn't that fast. But I was happy with the time considering the track was so damn slick I only cut a 1.90 60ft on that pass with BFG DR. Here is the slip.
60ft 1.902
330 4.998
1/8 7.501
MPH 97.76
1000 9.735
1/4 11.538
mph 122.10
I need to get some ET streets for these...
Last night I went to the track for the first time since I broke a halft shaft and added my new upper/lower combo with amazon tune. Since I broke the halfshaft I was a little scared to launch the car too hard. I did how ever get a new best mph. It went a 7.42 @ 97.56 (2.93 upper / 4lb lower )...
Well my 275/40/17 BFG DR have about had it so I was about to order another set when I went into the garage a seen a set of Weld Prostars 15x8 with a 4.5 BS off my dad's 94 GT. They have a almost brand new set of BFG 275/50/15 DR on them.
So I thought for a while just what would it take to...
I put on a LFP 4lb Lower kit on my car about 2 weeks ago. In the instructions it said that when running a smaller upper blower pulley to use the upper idler hole.
It seems that a lot of upper/lower guys are running the idler in the lower position. Is there a reason for this or is that the way...
Today I polished the factory idlers took about 5mins per pulley here is a before and after. Used the same process 80, 220,400,800,1000 grit sandpaper and meguries alum. polish.
Got bored today so I decided to polish my RPM outlet idler pulley and upper pulley a little. I used 80, 220,400,800,1000 grit sand paper then I used meguires alum. polish. Not to bad for 20 mins of work. I'm going to work on them a little more tommorrow.
PICS are a couple reply's down...
I just got done getting Magnaflow Magnapacks weld on. I had a American Thunder Flowmaster cat-back. The Maganpacks sound HORRIBLE! They crack, pop, and just sound terrible. Kinda like a old pick up with straight pipes. When at idle they sound like a damn boat. I'm taking the car back tomorrow to...
I just got done getting Magnaflow Magnapacks weld on. I had a American Thunder Flowmaster cat-back. The Maganpacks sound HORRIBLE! They crack, pop, and just sound terrible. Kinda like a old pick up with straight pipes. When at idle they sound like a damn boat. I'm taking the car back tomorrow to...