Search results

  1. stanggirl14

    WTB 04 front lower control arms (A arms)

    FOUND - WTB 04 front lower control arms (A arms) SO I was replacing ball joints yesterday and had a hiccup, anyone have a drivers side a arm for sale? I'll buy a set if the price is right but really need the drivers side. Let me know what you have, shipping will be to NC - 28376 Thanks!
  2. stanggirl14

    FS POSI ported eaton

    NLA - FS POSI ported eaton Thinking about going in a different direction so I am putting my Posi ported eaton (#0010) up for sale. I bought this from a member here last november and it has been sitting in my garage since I haven't had time to swap it. I do not know how many miles are on it...
  3. stanggirl14

    WTB Trunk mounting brackets for the Mach 1000 sub/amp system

    These never seem to accompany the rest of the system for some reason. Have the setup I just need the trunk mounting brackets, let me know what you have, thanks!
  4. stanggirl14

    FS Gates Green Stripe Belt K080806HD

    Got this from a member here, was too short for my setup. To my knowledge it has never been installed and run, I tried installing it but it didn't fit. It is 81 1/8" long, please disregard the handwriting, it's the belt I ended up needing. $35 shipped or mmao
  5. stanggirl14

    FS 3" JBA Catback for IRS

    SOLD LOCALLY I have a 3" JBA catback (IRS) for sale, nothing wrong with it just swapped it for a bassani. I do not believe it's stainless although I can't find any information about JBA making a non-stainless catback. The exhaust was on my car when I bought it, I took it off and cleaned it...
  6. stanggirl14

    FS JBA 3" catback

    SOLD LOCALLY I have a 3" JBA catback (IRS) for sale, nothing wrong with it just swapped it for a bassani. I do not believe it's stainless although I can't find any information about JBA making a non-stainless catback. The exhaust was on my car when I bought it, I took it off and cleaned it...
  7. stanggirl14

    FS Magnaflow Catback - Partially polished

    Found something else so this one is for sale. I bought this from a member here, not sure on miles, there are some scratches on the bottom of the tailpipes behind the mufflers (not the tips), can get better pics for anyone who wants them. I have been working on polishing the cb, it's not quite...
  8. stanggirl14

    WTB MM Caster Camber plates

    I can get these from lethal for 190, hoping to find a better deal here but if not I'll buy from them. Need cc plates for an 04 cobra, prefer new or close to it, pm me a price shipped to 28376 if you have some.
  9. stanggirl14

    FS: SLP Catted X Pipe

    SOLD!!!! This came out of my 04 cobra, I believe it's stainless, nothing wrong with it just changed it out for a bassani catted x, has a bung welded in that I assume is for a wideband gauge. The car passed an emission inspection is Dec 2013 and I've not had anyt CEL's at all so I assume the...
  10. stanggirl14

    FS Catted X pipe - JBA??

    SOLD!!!! This came out of my 04 cobra, I'm being told it's an SLP not a JBA. I believe it's stainless, nothing wrong with it just changed it out for a bassani catted x, has a bung welded in that I assume is for a wideband gauge. The car passed an emission inspection is Dec 2013 and I've not...
  11. stanggirl14

    FS 04 Front Bumper in NC

    hey guys, swapped out my bumper yesterday so mine is up for sale, this one definitely needs some work, has one crack and the paint is peeling, plus someone had a front license plate on it at one time so the holes are drilled out. The crack is about the size of a quarter and is above the...
  12. stanggirl14

    FS Heat Exchanger Brackets

    SOLD!
  13. stanggirl14

    FS 96 Cobra rear seat on an 01-04 frame

    FS Rear seats recovered in anniversary edition red and black I have the rear seat that came out of my 96 cobra when I swapped to the 03 seats. This one was recovered in vinyl by a local upholstery shop and matches the charcoal and red seats that came in the 03 anniversary edition cobras...
  14. stanggirl14

    FS Metco Auxillary Idler and bracket 90mm

    SOLD!!! I got a set of double bearing idlers so selling the one I had on my car. It's a metco 90mm single bearing idler with bracket, idler has approximately 10k miles on it but I replaced the bearing and snap ring yesterday with a new one from metco motorsports so the bearing itself has 0...
  15. stanggirl14

    FS Magnaflow CB for IRS

    As usual I can't make up my mind, found a borla CB locally I'm considering but need to sell this first. I bought this from a member here, not sure on miles, there are some scratches on the bottom of the tailpipes behind the mufflers (not the tips), can get better pics for anyone who wants...
  16. stanggirl14

    FS Tie Rod And R&P Prothane Bushings

    Prothane bushings that came in a kit for a 96 cobra, these are in the package and never been used - tie rod end boots (part number 19-1712-BL) - $20 shipped - rack and pinion bushing kit (part # 6-703-BL) - $20 shipped I have had these a few years and one package is ripped but the bushings...
  17. stanggirl14

    Rush the rock sit down racing arcade - NC

    hey guys, So I have a nice working RTR arcade from the 90's, this is the alcatraz edition and comes apart in 2 sections, it is complete and works perfect. Only issues are cosmetic. Has a nice 27" monitor in it with very little burn from a Cruisin USA, monitor chassis was rebuilt and...
  18. stanggirl14

    FS Random interior parts

    Cleaning out extra parts, all prices include shipping, feel free to mmao 2 Cup Holder inserts for 01-04 consoles - $15ea 2 Cup holder inserts for the 98-00 consoles I believe, one is black and one seems to be charcoal or midnight black. $20 ea - Black one on left is sold! 96 cobra leather...
  19. stanggirl14

    FS 98 cobra fuel rails

    I've got a set of fuel rails from a 98 cobra, bought them from a member here for an eaton swap but sold the car, they are missing the rubber fuel line that connects them. $25 shipped
  20. stanggirl14

    FS 2.5" Flow tubes

    SOLD! I have a new set of Pypes stainless steel flow tubes, 2.5",purchased from a member here but ended up not needing them, never mounted/used - $50 shipped
  21. stanggirl14

    FS - New Borla 4" exhaust tips

    Recently bought these from a member on corral but have decided not to use them, they were cut off a brand new Stinger catback. $115 Shipped (CONUS)
  22. stanggirl14

    FS - Borla 4" exhaust Tips - New

    Recently bought these from a member on corral but have decided not to use them, they were cut off a brand new Stinger catback. $115 Shipped (CONUS)
  23. stanggirl14

    FS: Black Cobra Rear Bumper Inserts

    SOLD!! I've got some metal cobra rear bumper inserts, brand new, decided not to use them. Bought from a member here a few months back. They still have the protective plastic on the front, some tissue paper is stuck to them in the pics but will come off. $45 shipped (CONUS)
  24. stanggirl14

    WTB Stock MAF Housing and bolts - with or without sensor

    hey guys, so my maf housing is somewhat toast, the screw retainers in the housing are stripped and I broke one bolt/screw off trying to get it out of the retainer. My sensor is good but I'll take one with or without the sensor, let me know what you have, price shipped to 28276, would like...
  25. stanggirl14

    FS Triple Gauge Pillar Pod

    SOLD I've got a triple gauge (2 1/16") autometer gauge pod currently mounted to a pillar for a coupe so you won't have to cut or modify your original. Not perfect, some slight warping along the top that sits against the windshield from being in the vehicle but in overall good shape, painted...

Top