Search results

I'm looking for a stock t56 trans, no magnums, with no issues or problem. Something that I can install and go without any repairs, let me me know what you have. Thanks. Sent from my iPhone using Tapatalk

As the title says I'm looking for a stock 03/04 cobra. At the very least I need it to still have the slip yoke, the pinion flange isn't important. Sent from my iPhone using Tapatalk

They were both mounted in my coyote swap project but never actually used. Both are powder coated black, the reservior is in 100% perfect condition, the intake tube has a small dent under the "r" in the MMR logo. I didn't notice it until a while after I received it and by that time I couldn't be...

As the title says, I'm looking for a good condition stock t56 bellhousing from an 03/04 cobra. I'm prepared to buy immediately so let me know what you have.

I have a spare 03/04 cobra intercooler(under the intake) for sale. I'm not 100% sure on mileage but based on the time it was pulled from the car it's around 20,000-25,000. I'm asking $450 shipped to your door. Pictures will be up in the morning.

As the title says, I have a Venom without winch mount, bumper from ADD for sale. I purchased it new from ADD and it has about 2,000 miles on it. No scratches or chips and no dings or dents. It will come with all of the original parts and hardware. I'm asking $1600. This thing was delivered via...

I have a tremec 3550 transmission with 26 spline input shaft, Hurst shifter, Lakewood bellhousing, and aluminum driveshaft for sale. It has about 3500 miles on it with only street and dyno miles. $1500 for everything and I would prefer a local pickup unless the buyer pays for and handles shipping

As the title says I need 2 cobra fuel pumps with or without the hat and basket. Thanks

W/ .96 exhaust housing. I purchased this a few years ago from the original buyer who bought it in 06 or 07. It was on his cobra for about a year with mostly track and street miles. After I got it, I never used it and it has sat around and with no plans for it in the near future it's time for it...

Okay bear with me on this post, I don't have any current pics yet but they'll be up over the weekend. I'm hoping for a quick sale and wanted to get the thread started asap. Rear are 18x10.5 with 295/35 BFG G-force radials with about 1/2 tread left and fronts are 18x9 with brand new 255/45 Nitto...

I'm reposting this for sale after parting the suspension out and putting it back to stock. I'm going to paste the updated discription from the original thread as an easy way to list all of the other info about the truck. I'm asking $25,000, please email me at Shea [email protected]. I’m...

I’m selling my 2007 F-250 Lariat Outlaw Edition with 79k miles. I purchased it from the original owner with 1200 miles on it in June of 2007. Stock options consist of 4wheel shift on the fly, upfitter switches, trailer brake, auto a/c, dual power seats, power heated tow mirrors, driver door...

I have a lower intake manifold from and 03 cobra that has approximately 25k miles. It has been setting in a corner of my garage so it needs cleaned up a little but otherwise it's perfect. $425 shipped to your door.

I'm going to be using an HPX maf from VMP and need some suggestions on its placement. From what I understand these are not as touchy as the tonsil style mafs are to turbulence due to bends in the intake tubing. As you can see in the posted pics, my tube to the throttle body isn't exactly...

I have a Spec stage 5 26 spline clutch that I purchased brand new and was used for about 5 dyno pulls then removed from the motor. As the pictures will show there is not a lot of visible wear apparent on any of the pieces but I understand that it is a used clutch. Get it for more than half of a...

I have a brand new in the box Tial 44mm MV-R wastegate with 11.6lb spring. It will come with all fittings, flanges, clamps and documents that came in the box originally. $325 for the wastegate.

I'm back to the stock pump and have been hanging onto this hoping I'll have some use for it but it's time to cut it loose. It is marked on the pump that it was made in 05. I bought it in 06 and have put approx. 5,000 miles on it since then. Along with the pump you will get the harness and...

I'm back to the stock pump and have been hanging onto this hoping I'll have some use for it but it's time to cut it loose. It is marked on the pump that it was made in 05. I bought it in 06 and have put approx. 5,000 miles on it since then. Along with the pump you will get the harness and...

I listed this as "like new" because it was bolted on a kit for mock up so it shows signs of being mounted but the car was never fired with the turbo bolted on. It has not seen any exhaust or boost. The specs are, a/r60 compressor, 1.15 t6 turbine housing with ceramic coating and 4" v-band...

I have a set of valve covers from an 03 cobra motor for sale. They were professionally powdercoated in gloss black. The finish is at about 95% percent with a few very small blemishes that can be seen when they are installed. I'm asking $200 shipped

I know this is probably a needle in a hay stack but I thought I would give it a shot. This was from around 2003 when Terminators first came out, it was a video being shot from the drivers side of another car at either very slow speeds or a stop. A sonic blue cobra went screaming by under heavy...

As the title says, I have a shortblock from an 03 cobra that is for sale. It is 100% complete with oil pan. It was pulled from a wrecked 03 cobra with approx 20k miles. It saw 18psi from a KB for about 5k miles before it was wrecked. I bought the motor as a longblock and had it in a project that...

I have a set of Strange 10 way adjustable struts(foxbody length) with Racecraft's "street" coilover kit and QA1 14-175 springs. Along with those I have a set of aluminum caster camber plates from Racecraft for 79-93 mustangs. Everything was bought at the same time directly from Racecraft. They...

I have a set of cams from an 03 cobra motor that I bought out of a wrecked cobra. They are Comp Cams XE270ah-114, product code 106200 and their Xtreme XE-R series. I'm parting out the motor so they are for sale. I'm asking $900 shipped to your door. If you want anymore information check out...

I'm selling my complete Big Stuff 3 set up. It was used to run a 4v mod motor. It will come with everything to install in your modular motor'd mustang. Every harness, replacement sensor, correct IAC valve and of course the BS3 box. It will also include plug wires and billet plates to mount the...