Search results

Making some room in the garage. Bought a PST carbon fiber driveshaft years ago and no longer need the OEM unit. Was taken off an 03 at 40k miles. Asking $300 shipped, will be shipped from Canada

Hey guys, Just bought a beater for cheap and must say I'm pretty stoked about the seats that came with it. In fact, I bought the car for the simple fact it's got awesome carbon fiber seats !! I don't know if they're aftermarket or factory installed in a different model but I'd love your...

Looking to make some room in the garage so I'm listing a couple stock 30k miles parts. Great upgrade for budget build GT or 99/01 Cobra ! - 39# injectors, $100shipped (SOLD) - Fuel pump hat w/ pumps (no socks), $175shipped Also have the stock fuel rails and FPDM. If anyone is...

Desperately looking for more power here !! Considered going the nitrous route but would like to hear opinions from people who switched from the small twin screw to its bigger brother. My car dyno'd 665whp @ 21psi on MS109 and traps 135-136mph in the quarter. I'd like to know what to...

Hey guys, Haven't posted in a while as the car was away for winter but now that the nice weather is back, the car is out and I'm getting the urge to go faster yet again this year... Last year saw the installation of a set of ARH headers which brought the car down to 10.44 @ 135.6mph...

Well,just wanted to report my own experience with longtubes. Setup is Whipple 2.3 with 3.0" upper and 4# lower. Return fuel system with intank Walbros and 60lb/hr injectors running VP MS109 race fuel. Baseline run on a Mustang Dyno with stock manifold and O/R Magnaflow X, car made 611whp /...

Haven't posted in a while as I kinda lost interest in the car when I lost cylinder #7 two years ago. At the time, I replaced the engine with an Aluminator and put the good old twin screw back on top of it. Got dragged to a dyno day / track event last weekend. The car made 658whp / 657wtq @...

My father took his GT to the drag strip last weekend and went 10.92 @ 130mph on worn 18" drag radials (1.75 60ft). It was his second time with the car at the drag strip. He went 12.X @ 124.5 bone stock last fall spinning through first gear. I think he did pretty good but don't have much...

My father took his GT to the drag strip last weekend and went 10.92 @ 130mph on worn 18" drag radials (1.75 60ft). It was his second time with the car at the drag strip. He went 12.X @ 124.5 bone stock last fall spinning through first gear. I think he did pretty good but don't have much...

Hey guys, I keep breaking half-shafts at the track and really want to stay with the independant rear suspension. DSS is out of the question and I've heard from S&S Chassis / Strange that their 03-04 Cobra half-shaft has been available since April... Just wondering if anyone is actually...

Just wanted to share last week's experience. I actually put the car on the dyno to fine tune it last week and I left with 669 / 667 with 20deg of timing. I picked up an average of 30whp / 30wtq throughout the RPM range by backing timing from 23 to 20deg. I've always assumed 23 was "Maximum...

Alright guys, I know this has nothing to do with an SVT product but I've seen my friend pull off a complete engine build, custom turbo setup and tune in a little more than a month and must say I am impressed with his skills and the end result. We all were actually !! :banana...

New personal best yesterday. Finally managed a decent run in good conditions. First time I ever went 1.5X 60ft and must say it's pretty damn fun ! :-D Cut a 1.56 60ft, 6.81 @ 104.8 in the 1/8 and stopped the clock at 10.56 @ 132.13mph. :banana: Running a 2.3 Whipple @ 21psi with MS109...

We had terrible weather last weekend (90F, 90% humidity) but I felt like going to the track anyway and shoot for that 10sec run so I slapped on the 3.0" pulley (21psi) and 5 gallons of MS109 in the tank. Made three runs... Missed second gear on my first one... yeah, I know... :shrug...

Thought I would share and see what everyone thinks. First time at the track this year. Had trouble with the launch, couldn't manage anything better than a 1.67 60ft... Car is running 17psi, tuned for 94 octane and sees 20deg of timing with 11.7 AFR. For some reason, it ran in the 12.2-12.3...

Hello there, Recently installed a Whipple on my Cobra along with return style fuel system using 60# Siemens Deka injectors. The MAF transfer function was dialed in pretty decently last year using the stock 39# injectors. FRPS was kept and base fuel pressure was set at 39psi and pressure was...

Used FRPS in good condition (maybe 500miles on it) Went return style, no longer need it. Retails for $80, asking $40 shipped. By PM please. Alex

Parts are off a 1998 SVT Contour. Cams are in great condition as the car has always been treated to Mobil 1 synthetic oil. - Cams including all timing gear (chains, guides, tensioners, ...) $200 shipped - Upper / lower intake manifolds that were cleaned up 2k miles ago, no carbon buildup at...

For sale is a used fuel hat assembly complete with pumps. Fuel level sending unit is not included as I needed it on the Fore hat. Pump socks will not be shipped as they have been damaged during assembly removal. Everything else is in great condition. 30k miles on it. Asking $150 shipped.

I've got 2 weld Magnum 15x3.5's for sale. They are the 4.5" bolt pattern and have 1.75" backspacing. They are the 2 piece design and weigh 8lbs each. Stock wheels weigh close to 30lbs if I remember correctly so that's a 45lbs weight saving. That's an easy 1mph right there if you're still...

Hey there, Currently installing a bunch of mods and wanted your input on the situation. I will be running a 2.3 Whipple @ 21psi on race tune. Car is still running the IRS with the following... - RAM Street dual disc clutch - BilletFlow brace - MM urethane subframe bushings - MM...

Up for sale is an MSD Fuel Pump Voltage Booster. This module maintains fuel volume in relation to boost pressure by stepping up the supply voltage to the fuel pumps. It is essentially the same as a KB BAP except that it is not recommended on a returnless fuel system. Part is in great...

For sale is a set of 03/04 Cobra 39lb/hr injectors. Removed from the car this week at 30k miles to upgrade for the upcoming Twin Screw. Will support 500rwhp. Asking $100 shipped to lower 48.

Hello there, Been running with 26 x 9.5 x 16 Hoosier QTP last season but I will need stickier tires this year. After looking at Hoosier / MT / Goodyear / Phoenix / Toyo and M&H, it looks like my options are as follows.... 1) Hoosier 28 x 10 x 16 2) M&H 26 x 12 x 16 I'm pretty sure...

Currently looking to upgrade my DJWBC. I was pretty much set on the LC-1 with XD16 gauge but I recently learned that Dynojet just came up with a second generation product. Has anyone ever worked with one of these ? Dynojet Wide Band 2 Product Details, WB2 Product Information, Air/Fuel...