I recently had an F1D installed and the boost levels seem a little low to me. I know there's one or two other people on this site that are running one of these. Also, if you're running an F1A, I'd like to here your numbers around 4000 RPM. The two blowers are very similar in their cfm output...
My tuner has been having issues getting a smooth idle with my new setup. It was originally setup draw thru. He was having issues with with the bypass valve making the maf counts erratic, so we changed to blow thru, and supposedly it's even worse, which doesn't make sense to me.
You guys have...
So my tuner is having problems tuning my car. It's currently set up as a draw thru with a bypass valve. Car has a Procharger f1d on it.
He says there's two problems. First, the maf pipe size is different than the intake pipe size causing turbulence around the meter. Second, recirculating...
ATI Super Damper Harmonic Balancer Crank Pulley for an 03 cobra Part #918036 (5k miles) - SOLD
https://www.dropbox.com/s/fwvi944xfcpaxjv/20140618_203103.jpg
https://www.dropbox.com/s/wihzcj9o7qg4b9a/20140618_203135.jpg
A/C Compressor pulley (30k miles) - $40 shipped...
Am I the only one that's been having issues with their password not working? I've had to reset it twice in the past three days. I know I'm entering the correct password. What's going on?
I've owned my mustang going on four years now. I've taken it to speed shops on two different occasions. The first occasion, was about 50 hours worth of work. The second, about 30.
The first time, I didn't get the car back for three months, and seemed to be put off and given excuse after...
I've got a Kenne Belle Boost A Pump with about 20k miles of use. Pulled off after going return.
$150 plus shipping
Here's a picture
Posted via Topify on Android
Satin finish. Changed oil every year or 3,000 miles; whichever came first. Has approximately 20k miles. Brand new 3.4" pulley and fresh oil.
This setup made 550hp @ 15psi on the stock air-to-water setup with the ProCharger intake. Definitely more power to be made if you were to run a more...
I'm currently running a P1 head unit and have ordered an F1D. According to all of the sources that I've read, it's a direct bolt-on replacement. I am also ordering the budget return fuel system from Lethal Performance as it's only a few hundred more than upgrading the returnless system...
WTB: 60lb or 80lb Injectors
Looking for a set of 80lb EV6 USCAR High-Impedance Injectors; flow matched would be a plus, but not a requirement. Would also be interested in 60lb injectors.
Hey guys,
I'm starting to consider upgrading my Procharger P-1SC-2 (not polished) that's currently on my car. It's got about 20,000 miles on it. Oil's been replaced every year (~3,000 miles). Made numbers in sig with 15psi @ 6000rpm. What do you think I could get for it? Looking at...
I need to replace my belt tensioner on my 03 Cobra. I'm looking at picking up the UPR piece; seems to offer the most bang for buck. I'd luck to buy a large pulley for it to increase belt wrap since I'm running a 6-rib procharger system, where any extra belt wrap is helpful!
My question is...
Terminator Parts - Priced To Move!
Several parts for sale that got pulled off over the Winter. All parts have approximately 28k miles on them. Prices do not include shipping.
Heat Exchanger - $80
https://www.dropbox.com/sh/d4eeyoco9fbfof5/KhNQTwv-tP#f:BNS_0026.JPG
3.55 Gears with most...
As the title states, looking to purchase a throttle cable for a 99-01 Cobra. Best condition I can find. Hopefully, one of you can help me out!
Also, if, any of you know a good alternative that requires minimum modification, please let me know.
Thanks
I've got a 3-core, sheet metal intercooler from ProCharger for sale. It's the 27"x15"x3" with 3" Inlet/Outlet for supporting up to 950 HP. It's in good shape; no dings or rust or anythinig like that. Getting rid of it, because my shop thinks it's too large to fit behind an 03 Cobra bumper; so...
Hello All,
I'm new to the forum and have a ton of questions regarding my new cobra. Let me start by telling you about the new vehicle. It's an 03 Cobra with a P1SC-2 unit and Flowmaster cat-back system installed. I have no idea if there's anything else, because the vehicle was a repo and I...