Although still a sizeable issue on the blower, I'll take that all day long compared to an engine replacement.
I realize your approaching your next steps strictly from a budget stand point but wanted to clear up fuel crossover hose. I've got an '07 and there aren't any clearance issues, the...
AFR, Boost/vacuum, Ambient Air Temp, IAT, Fuel Pump Duty Cycle, Coolant Temp.
This is using in combo with a ZT2. Pricey for sure but I didn't want "unknowns" when dealing with the tuning on this beast. Lund highly recommended this setup.
Have the battery voltage monitored on a scale within...
Seems like your rapidly loosing vacuum and intermittently activating the bypass valve on the blower. Since it started right after the injector work it's conceivable that they don't have an injector/s sealed properly which would likely present a vacuum leak.
If I'm way off I'm sure someone will...
They hook up real well, but I'm @ altitude like you. So we loose about 15-20% HP/TQ @ this elevation. Someone at sea level with comparable mods may not think the same. The ride is good as well but I haven't put many miles on the tires.
Cheers,
Ray
As already mentioned at idle you can hear a distinct sound from the Whip 2.9. I love WOT as it makes its presence known. I'm running a 3.0 pulley you can get 17psi depending on what plugs you use. You have a lot of good options out there that certainly will give you that whine so base your...
I'm not using any kit @ this time. @Totalpkg shows he's using this kit (post #7). Actually, the parts list came from a forum post that I updated with new part #'s & pricing.
Forum Link post #18.
It appears I already have some of the parts fastening the fixer flat kit. I would assume all 07-09...
Thanks all for your responses, great information/options. For those that are looking for the tools to support an in trunk wheel well setup I updated what I had found on this forum:
Jack Assy: CR3Z-17080-A ($51.04)
Plate: E9SZ-1424-A ($2.68)
Bolt (Wing Nut): E6DZ-1462-A ($2.72)
Bolt (Long...
Looking to use one of my OEM rims (18x9.5) as a spare with a radial (non-directional). On the size I was told by discount that to use the spare on all 4 corners it should match the size of the front which is 255/45Z/R18. The rear currently has 295/40Z/R18 & tires are Nitto NT555 G2.
Just...
Don't want to hijack this thread but I too wanted to welcome back Willie. Good to see your still out there & absolutely wish you the very best in what's going on in your life. I haven't posted in sometime but I felt obligated to reply after seeing your post.
You have been & continue to be a...
If you haven't already make sure your plug is in working order and gapped correctly also torqued to 13ft. lbs. Ensure you hear or verify the connector snaps into place onto the coil pack. There is a latch that I noticed doesn't always snap into place. I would visually check the connector pins...
^Exactly. If the shaft is dropped it looses it's integrity. And this may only show up as what the OP's pic shows. If you go this route don't chance getting it second hand unless it's someone you trust but can also provide detailed pics of the entire shaft top to bottom. If you buy a new one get...
I actually came in to have it installed and they couldn't find it in parts dept. This was actually the 2nd go around. Anyway the parts guy is telling me the p/n is 6G7Z-63044A74-A. Which is different then the p/n Steve provided. I wouldn't think the '07 MY would be different? From what Ford...