INSTALLED ANOTHER REBUILT CALIPER AND RECENTERED BRACKET TO ROTATER WITH A WASHER, HAD BIGGER AXLES INSTALLED 2 YEARS AGO AND THE CALIPER BRACKET WAS HITTING THE ROTATER. NEEDED TO BE CENTERED UP.
replace rear caliper last October because it was leaking.
test drive car sometimes its ok, then sometimes rear rims gets smoking hot!
any ideas?
I use ebrake all the time.
drilled vented rotators, ceramic brake pads
could it be a bad after market part? not a ford part.
casting that holds caliper...
I installed old p600b prochger on my car 2 years ago. Runs great!
How do i know if i need a oil catch can? Were would i look for excess oil? In air filter?
howdy,
I have a p600b prochager with a custom steel welded inlet pipe.
WITH A 3 CORE INTER COOLER.
I Just purchase the procharger plastic inlet pipe for $20 bucks on line.
The plastic inlet tube appears to be a little smaller then the one on car now.
The procherger one will look alot nicer...
Howdy,
i have a p600b procharger now, just seen a p1sc head unit only
for $500 used onlu 1,000 miles run time? Looks really nice
does anybody know if this would mount up to my existing brackets? Also the correct rotation concerns me cw or ccw?
Howdy,
just had car retuned and dyno.
380 rwp, 364 tq, 13.3 a/f raito, 7.73 lbs of boost.
I installed smaller pully 3.2 to a 2.9 diameter,
my boost gauge in car was showing 10 psi
picked up another 30 hp to wheels with pulley change.
pretty happy, long tube header next!
Just seen on ebay, thought someone might be interested.
I did not know these kits were avaible when i supercharged my car.
Its is a kennebell adapter kit that goes on top of the engine for 96-98 svt cobra. Kits has a buy now price of about $525, missing a few things, you would still need to...
Good day.
I purchased set of M/T ET STREET RADIALS
from discount tire in michigan.
its a p295-45-17 on a 17x9 rim.
what air pressure should i be runing on the street?
Car makes noise after about 20 minutes of driving.
like a squeky,squill, seem like it only makes the noise
when i slow down for a stop low mph, pretty loud too!
when i push the brake on the noise goes away.
so i put new rotaters and pads on the front, did not help!
i think is coming from...
Are the flywheels balanced to the crankshafts?
just installed new clucth on my car spec stage 2
had the flywheel resurfaced, it was pretty bad.
everythng is feels good, and car runs great.
but my dad asked me if marked the flywheel to the crank? i did not.
this leads right into...
My back window glass is starting to seperate from the fabric.
the fabric still in great shape, can anybody recommend a glue
to bond the glass back to the fabric?
i have transmission back uop and ready to bolt up.
i dont want to use the old botls, they are all border line bad.
i found a set from American mucsle ford racing modular bell hosung kit, but it listed for the tremec bell hosuing.
it sure looks like these will work, does anybody know if these...
removed my catalic convertors two years ago.
has anybody scraped these out, wondering how much $$
you could get for them??
i live in mi, dont need to pass emisson test here.
good day!
ok got car jacked up, quick inspection, doesnt really look like
i need to remove the exhaust H pipe to remove the trans.?
I had an exhasut shop remove cat and heat sinks 2 years ago and they welded up a custom crappy weld exhasut system with no flange for the mufflers. has anybody...
cleaned my imrc and removed butterfly valves.
car made 8 lbs of boost at 350 hp at the rear on a 100 degree day
i installed a used p600b procharge last year
i just installed pulley that was on there when i got s.c. unit
it is a 2.90 tuner thought should get 11 psi
i think 10% hp increase...
Got my imrc;s upper manifold off car for cleaning,
next project is stage two clutch, i can see the top two bolts
with the top manifold off, nice easy access to bolts.
But i cant get them loose, i been soaking form the tap thru side
for two days now, no luck, any idea;s how to break them loose?
I know another imrc's cleaning thread. but.
after cleaning everything up i look down into the exhaust openings
and they are dirty, intake not so bad, does anybody clean these
ports out? if so how is the best way to clean?
i have a 17x9 rim on my 98 cobra.
i have a 275/40/17 tire on there now.
looking to upgrade to a MTDR
Can i go to a MT ET STREET DRAG RADIAL P295/45R/17
on the 17X9 rim? or is this to wide a tire for this rim??
anybody have this set up now??
My first trip to track last weekend and made a few passes, clutch started acting funny, one of the passes clutch pedel went to the floor and i had no gears i pushed the clucth pedal a few times then i found my gears??
now when i shift into first i hear some kinda grinding clunck noise, second...
Good day !
Just heard they rescheduled the mustangs are coming.
At UBLY Drag strip up in the thumb area
New date is October 27.
I sure hope i can make to drag my car after all the work i did to this summer
Just got done installing a p600b procharger
that came with a ecm computer chip for a
1997 cobra, does anybody know if this chip
will work in my 1998 cobra.
Would i risk messing somthing up if i tried it??