Search results

Where are all the old heads at??!! Its been a hot minute since Ive jumped on the forum but after seeing Bens COTA lap I had to login and try to catch up with everyone. We made some changes to the GT500 for the wife and I might've picked up a new snake...

Finally got our 2020 GT500 on the dyno to do some baseline pulls. We have a good bit planned for her, but wanted to see where we are starting from. First track rental isn't until the end of March so gotta try and be patient. Dyno Jet dyno 1st pull- 673whp 550tq 2nd pull- 675whp 555tq 3rd...

Im realizing I need to come on here and post my jobs as they come thru. But here are some random shots from some recent jobs. Lexus and Chevy 2500 interior details Audi SQ5 for a full interior, 2 step paint correct, and ceramic coating 03 cobra 2 step paint correction and ceramic coating...

Long time no post! Figured I'd stop in and say hi. After spending the last 3yrs with a Raptor and being about sick of trying to tow with it I decided to pickup my first F250 and I can say I have no regrets. Luckily we still have the raptor but its the wifes daily now. Also decided to get rid...

Hey fellas! I've been on the forum for a fairly long time at this point and back when I was about 18 this section really got me interested in higher level detailing. Here are some jobs Ive done over the last year or so! Most of my go to items, CarPro Clear Cut Carpro Reflect iBrid LK900 Rupes...

Just throwing this out there to generate some conversation and see what everyone is running for 1k whp++++ stick cars. I've looked at the RXT and Mantic but I'm wondering if I'll just be perpetually replacing them every year. My build isn't done yet but we are exploring some more options. Car is...

Been a hot minute since I've posted on the forum and just wanted to check in with everyone! Wife and I were in Ocean City last weekend and had a good friend of ours take some rolling shots! Hope you enjoy!

Hey guys, I know its been a hot minute since I've posted on here but life happens haha. Since separating from the Marine Corps I got the wife a new car, replaced my old f150 and modded the cobra a little bit. Enjoy!

TL; DR 305/45/18 or 325/35/18 ET Street R for a 18x10 700whp Whipple Car After searching the forum I didn't find the exact answers I was looking for. The feedback I'm getting from everyone is that the Street R performs extremely well. My only concern is fitment. For 18s they only have 305/45/18...

I am located in the DMV area and I would like to find a drag setup for my 03 cobra. Specifically: -17in front -15 or 16x10 rear -Partial or Full set -Bias plys only -28in -Welds -Bogarts preferred*** Thanks guys

2.3L Whipple Supercharger- 6k miles Accufab Single Blade Throttle Body- 5k miles 2.6 Reichard Racing Upper Pulley- 3k miles 3.0 Whipple Upper Pulley- sub 1k miles I will not separate any items unless the supercharger is sold. I prefer to sell as a package. $3200 for everything Everything is...

So after 2yrs and a build I finally had some time to sit down and do a proper 2 step on my 70k mile cobra. The results were fascinating and I was happy to continue experimenting. The second detail is a close friend of mine and forum member (I need to look up his screen name, its been awhile)...

Huge thanks to FORE for being an awesome company. I finally got my 03 cobra back up and running and with the help of 04sleeper got her all dialed in and running strong on my 93 tune. When I got back from a few pulls I noticed some hissing around my FRPS and thought it just needed to be tightened...

I know I have been hit or miss with updates on my build but with a deployment and life in general stuff gets pushed to the side. But Kevin has been a wonder to work with and I couldn't ask for a better guy to help answer the never ending amount of questions at times. Just finalized the 93 tune...

As some of you are aware I've been collecting parts and working on this swap for a decent bit of time. Well between a small deployment, buying our first house and getting a new DD I've gotten a little side tracked. Never the less, we made lots of headway this weekend. Got the fuel system all...

We bought our first house in June and since then we've been working on clearing the back yard from the crazy over growth and then clearing the few problem trees. The video below is of me dropping the biggest tree in the yard between the garage and the dining room......it was a little tricky but...

Well I decided it was time to retire the Chevy Cruze and upgrade to something better suited for the new house, dogs, and car. It's a new 2014 F150 FX4 with the 3.5 Ecoboost. So far we've put about 1k miles on her. I plan on doing some simple things like linex, HIDs (OEM), and some other odds and...

Like the title states if you have a 3.0 whipple pulley I have cash in hand and ready to buy! Send pics and a description to [email protected] Thank you, Marc

So I figured I will make an official thread now since I start teardown in the morning. I picked up this 03 10th anniversary last September and this will be my running thread for all my mods and projects over the next few months. My wife and I will be doing most of the work but I'm sure I'll have...

Well, after a lovely discovery someone hit the cobra in the parking lot at home. Now the front bumper has 3 nice sized scrapes down the front bumper, all the way to the plastic. So, anybody know a decent paint guy?

I'm having the absolute worst luck with this damn car. I've had it since September, -on my way home from buying it, caught fire (fog light overheated burnt up the harness) -that night the tow truck ripped the bumper off -dad took the car out while it was "stored" and ****ed up the chin spoiler...

Like the title states, Anybody have a fender roller they are willing to lend out? Allot of the MACA guys know me so they can vouch for me. Just need to roll the fenders on the slobra then you'll get it back. Any help would be much appreciated guys. Thanks, Marc

So I've been doing allot of research and reading around and I'm just trying to make sure I have everything accounted for here: Parts are as follows, Fore Fuel Rails Fore Dual Pump hat w/2 465 walboros FC3 Controller Hobbs Switch -8an feed/return ID1000s 2.3 whipple Gen 2 Accufab Single Blade TB...

So I've been doing allot of research and reading around and I'm just trying to make sure I have everything accounted for here: Parts are as follows, Fore Fuel Rails Fore Dual Pump hat w/2 465 walboros FC3 Controller Hobbs Switch -8an feed/return ID1000s 2.3 whipple Gen 2 Accufab Single Blade TB...

Looking for a 3.0" whipple pulley, polished preferred. Will accept black. Thanks, Marc