Hey everyone,
I have a 1997 Dodge Viper GTS, generation 2. The engine is a custom built 540 cubic inch stroker motor, that makes 650 crank horsepower, and nearly 800 crank torque! The thing is a monster. Less than 10,000 miles on the engine build, 49,500 miles on the chassis. Clean title...
**please call or text me, I don't visit this site often**
16" sn95 pony wheels, 4 with tires, and caps, two additional wheels (no tires on them). Receipt evidence of brand new tire purchase in October of 2015. 215/60-16, which are wider than the 225's they replaced (happens between...
**please call or text, as I am not on this forum often**
Hey everyone,
I will be swapping to a 351w which is the only reason for the sale. Still in the car, running and driving (my daily driver).
302 (short block):
Stock bottom end out of a donor car, head studs, HD timing set...
Hey everyone-
I have a 93' notchback that I'm considering doing a 351w swap. I have an Explorer intake manifold (ported) on my 302 currently, and I would like to retain a stock appearance when switching over to the 351. So, I'm looking mainly for the lower (to mate to my Explorer upper)...
Hey everyone, I purchased a 1993 4-cyl. notch a few months ago with the intension of converting the coupe to a v8. Little did I know the true magnitude of the process that is involved to do the swap right. For those interested in doing this conversion, I encourage you to source a factory v8...
This is the real deal folks! A true Texas Highway Patrol coupe!
Exterior is a dark grey, the interior is ruby. Manual windows, manual door locks, power mirrors (not functioning), cruise control (not functioning). AC is all new, and functioning, however, the HVAC control panel needs to be...
This is a 1993 ford mustang 2.3L "dual spark plug per cylinder", 4-cylinder engine. It will include the 4-speed automatic AOD transmission, belt drive components, starter, radiator, electric fan, air intake, air box and exhaust system. Complete take out! Runs incredibly well. New NGK plugs, new...
Nearly factory stock, clean title, new tires, new shocks/struts, rare factory black leather interior, short shifter, just passed emissions, 184xxx miles. Does have flowmasters. Map pockets are sagging, arm rests are in great shape, center console armrest delete, ashtray door is also present...
PRICE LOWERED
1988 v8 5-speed non-California car. Clean title, inaccurate miles (exceeds mechanical limit of the odometer) Power windows, power door locks, cruise control (no longer equipped), AC (no longer equipped), power steering (no longer equipped). Title steering column.
Modifications...
Hey everyone, I have the following for sale:
Momo Monte Carlo steering wheel (black with black stitch)
Momo K 4525 steering wheel hub adaptor
NRG version 2.5 blue quick release hub
The package will move the steering wheel about 4.5" closer to the driver.
The full package, new...
Hi everyone,
I have a BBK cold air intake (fender mount) part number #1557 for sale. I do not have a use for it. One of the fitting was pinched when installing, but it still seals properly without an issue. The filter will need to be cleaned (rechargeable K&N filter).
$50 EXCLUDING...
Nearly stock except for flowmaster mufflers with polished stainless steel tips. Great opportunity to pick up an unmolested mustang notchback!!
Brand new transmission (automatic) with full warranty!!
New rear main seal, new engine mounts, and transmission mount installed at the same time...
Hey everyone, I've signed up for auto check, and I wanted to extend the opportunity to forum members. I can run as many vin #'s as you desire! for a nominal fee. I will provide an email copy of the report. :thumbs:
Great opportunity to review your own vin or prospecting vehicle purchases...
Hey everyone, I've signed up for auto check, and I wanted to extend the opportunity to forum members. I can run as many vin #'s as you desire! for a nominal fee. I will provide an email copy of the report. :thumbs:
Great opportunity to review your own vin or prospecting vehicle purchases...
Hey everyone, I've signed up for auto check, and I wanted to extend the opportunity to forum members. I can run as many vin #'s as you desire! for a nominal fee. I will provide an email copy of the report. :thumbs:
Great opportunity to review your own vin or prospecting vehicle purchases...
Gunmetal cold air intake for a fox body with MAF sensor, here is the link from AEM. Lightly used, comes with everything needed to install, including the instructions.
$100/shipped. (48 states) USPS priority flat rate
AEM link
21-8105DC - AEM , AEM Brute Force Intake System direct from...
$650
Weld Draglite polished wheels for the fox body mustang 4-lug. These came off my 92' Lx notch, I decided to replace the tires on the original pony wheels and remove these all together.
Excellent tread left on these, you'll need to remove the quad shock, and roll the fender for proper...
Just letting everyone know, I have a brand new, still in box, set of cobra jet "R" springs. These lower the car, and are intended to be used with GT500 strut mounts. I posted this on the 2011+ for sale section, but this will definitely work for the s197 community as well. Thanks...
Very gingerly used, bolted on for dyno purposes. Then removed, and stored. Two adaptor brackets for either the boss or standard intake manifold, full instructions, harness, and worm clamps. Great opportunity to gain power under the curve and on the peak end...
Brand new, in the box, cobra jet "R" springs. These are the set that will also LOWER the car. Approximately 2" front, 2.5" rear.
$200 shipped (lower 48)
* you will need gt500 strut mounts to run these, I haven those for sale too.
Text preferred, email and PM's are okay too...
Hello - it's time to sell the toy. I've decided to open up some garage space for something else. Here are the details;
2012 base model GT brembo package, 6-speed manual, spoiler delete, stripe delete, 3.73:1 gear. Ordere 2011, built and delivered February 2012.
3,727 miles (weekend cruiser)...
Hey Everyone-
I wanted to share my modifications and experience with my 12' GT upgrades. I wanted to pursue the most cost effective upgrades that would yield the best results.
here is what were I've got as a result of that evolution;
"best exhaust"- Other than Gt500's, wtih an...
SOLD
Hey everyone-
I have a set of Heartthrob axle-back's up for grabs. These are the aluminized steel versions (currently being sold for $339 on AM-WHICH ARE CURRENTLY OUT OF STOCK, and other vendors). I had these on my car for about 500 miles (weekend car), and I'm a little bit of...