Im looking for a (cheaper) caged crank pulley, if its in slight disrepair, even better. using for CJ's 4# lower upgrade. tired of spending gobs of money on this f**king car too, so cheaper the better.
also, so i can keep the boost levels where they need to be, i need a 4" upper pulley for the...
i am looking almost desperately for a ws6jjp caged lower. one of the 8 made with the 6 pin driver is preferred and the 1 of 1 that ws6jjp had made for himself is the golden ticket. ill pay almost whatever for one, seeing as how theyre not made any longer and theyre about the only thing out there...
tried searching this one but couldnt get any results. if anyone has asked this before, please excuse my lack of results.
my basic combo is a 4.6 with everything under the sun and a 4.0 whipple. I am using the stock caged lower that has been tig reinforced to strengthen it. i recently had to dig...
heres my setup first off:
-built 5.0 stroker, all the fancy stuff, not really important to know right now
-4.0 with 3.5" upper
--->using factory lower caged setup with an innovators balancer.
question i have...blower makes too much torque, and is snapping the front piece off the pulley ring...
All prices are OBO, within reason.
Steering rack bushings. Brand new. $15 shipped?
Stock 04 coil covers. Dirty but will clean up nice. Put billet pro shop covers on. Asking $50 shipped.
Stock 110%, 04 lower intake. Great shape, installed a port matched one. Unsure if I wanna sell this...
I have a local pal looking for some full length mm subframe connectors. He's found a couple sets for $155 shipped but is looking to see if there is anyone that has them cheaper!
He is also interested in the Kenne brown matrix, stifflers or Hans race craft setups with jacking rails. Lets see...
I pulled my 04 longblock this summer to install my built motor. Was gonna keep it, but seeing as how I probably never will put it back in, and I need drag wheels...well, it can possibly go. I really am only interested in weld rts wheels or darkstars/race stars. 17"x3-5" fronts and 15's or...
Full set of (8) deka 80# ev1 injectors. Can use adapters, I kept them for my new injectors. So they don't come with these.
These work the 96-98 model stangs. Fit lots of other stuff too.
These are 3" tall slim injectors for anyone wondering about fitment.
These are practically brand new, have...
I'm wanting to buy some I/c pumps that don't work. I don't want used ones, just non working or intermittent ones. I'm going to rebuild them, for myself and some local car buddies. Lemme know what you have and well work out a price
Aeromotive 12335 fuel filter and housing. Perfect shape just got a different one with a fuel system I just bought. Only has had fuel in it to pressurize the system and check for leaks. Brand new otherwise. $50 shipped
Spec 2+ clutch SOLD
Fuel injector connection FIC 55 lb /hr high impedance...
Aeromotive 12335 fuel filter and housing. Perfect shape just got a different one with a fuel system I just bought. Only has had fuel in it to pressurize the system and check for leaks. Brand new otherwise. $50 shipped
Spec 2+ clutch SOLD
Fuel injector connection FIC 55 lb /hr high impedance...
Need a set to fit my monster Whipple under stock hood. The k member just wasn't enough. These are claimed to lower it the 1"+ I need to clear! Need a set ASAP! Lemme know if you have some!
I know I know, this is a terminator only classifieds section but maybe someone has a set! Trying to get the big Whipple under the stock hood, and these a should do the trick. Need a set ASAP, like yesterday. Lemme know what you have!
As the title says, I want one that does not work so I can rebuild it and use it on my car. Don't want any with cracked housings or broken pieces. Don't want to buy a working one because I can rebuild them far cheaper than buying a used one! Lemme know what you have and we can work out some kinda...
I'm in need of one, since I haven't started install of the new motor quite yet, I'll see if anyone wants to sell theirs before buying new. If you have one lemme know!
Have a bunch of stuff for sale right now, moving and the less I take with me the better! Everything is open to offers, but be reasonable!
JLT
Sold
Metco lower cage delete SOLD
K&N filter, 4" inlet, 12" long.
Before you ask(!), I am not being a dick by not including this with the jlt! It just...
Have a bunch of stuff for sale right now, moving and the less I take with me the better! Everything is open to offers, but be reasonable!
JLT
Sold
Metco lower cage delete SOLD
K&N filter, 4" inlet, 12" long.
Before you ask(!), I am not being a dick by not including this with the jlt! It just...
Wtb stock size lower. MIGHT settle for a 2# lower too, but nothingn bigger, as I'm running a 4.0 and I will have no issues making lots of boost and lots of power. Just need a normal sized pulley to run on my innovators setup :)
lemme know what you have!
I'm looking for some cloyes adjustable secondary cam gears. Only need a pair of them but will entertain a full set. New or used so long as they're not f**ked up. Pm me or post up here, thanks!
I'm looking for some cloyes adjustable secondary cam gears. Only need a pair of them but will entertain a full set. New or used so long as they're not f**ked up. Pm me or post up here, thanks!
I am looking to buy used or non working intercooler pumps! I'll give $25 for them. The usps flat rate medium box is $12.75 so that means you'll make $12.25 off of junk floating in your garage!
Pm me what you have. If you have multiples, you can fit at least two in a medium flat rate, or 3-4 in...
I need some primary/outer cam gears. **Not the inner secondaries, edit.** Preferably oem, non adjustable. But will entertain anything really. Lemme know what you have and what you're askin!
I have a set of 03, 4 thread, stage 3 heads I'm want to sell. Were ported by al pappito. Heads had 13k miles on them before port work, only 500 miles since port work. They look brand new! These were on an n/a motor, so they haven't had boost run thru them since port work was done. I myself never...