Search results

  1. W

    Bgg performance 8 rib kit and innovators west 15% OD

    I have a complete 8 rib setup off of my 01 mustang. This kit is the BGG 8 rib kit. Was only on car for about 200 miles. Comes with a gates k081065hd belt that will work depending on what supercharger pulley you run. Also have a innovators west 15% OD that comes with the kit that has only about...
  2. W

    Paxton novi 2000 freshly rebuilt

    I have a freshly rebuilt Paxton novi 2000 on my 01 bullitt for sale. Blower is setup with a 2nd blow off valve acting as a waste gate to control the boost with a manual boost controller. Blower is freshly rebuilt with only about 200 miles on it. I'm taking it off to go turbo. All piping is...
  3. W

    Rebuilt novi 2000 setup

    MAKE AN OFFER I WANT IT GONE! I have a novi2000 setup I am trying to sell. Blower was rebuilt by vortech and has literally 2 miles on it. Car will be going in for a tune in a week or two. So miles will slowly go up on blower. Was driven around my neighborhood. It comes with fresh powder coated...
  4. W

    Novi2000 blower, bracket, 2 pulleys

    I have a Paxton novi2000 for sale. Blower is at Paxton being rebuilt. It is getting new deals and bearings and will be back next week. The blower will also come with the bracket, a custom 2.8" 8 rib pulley and stock 6rib pulley. Asking $2300 obo. I can email pictures if interested.
  5. W

    t56 swap soon

    I started buying all the parts and trans a few months back. I got a good deal on a built t56 a few months ago. Come next weekend I will start the swap. My last few parts finally got here. trans, aluminum driveshaft, cross member 26 spline clutch disk throwout bearing and fly wheel insert...
  6. W

    boosted bullitt, 2014 gtr, H/C/I c5

    Went out this weekend with a few guys to mexico and got some good runs here. My built and blown bullitt with the only passenger. C5- Big cam, intake, z06 heads, full bolt ons at 3000lbs gtr- stock minus a computer tune. Which apparently doesn't really change anything? I was supposed to race...
  7. W

    rs7,rx7,blown2v,camsprayc6 runs from this weekend.

    Went out with a few people this weekend and here is the video my buddy put together. The rx7 made about 550rwhp and still being tuned hes shooting for over 600 when done. The rs7 has 700rwhp. The c6 is a cammed auto that made 450rwhp through an auto before the spray. My built 20 at 503rwhp and...
  8. W

    setting up pinion angle

    So a while back I messed around with my pinion angle. Recently been the track 2-3 times since it was changed and my mph was 3-4 mph slower each time out. I am thinking that is because my pinion angle is not in the best spot now. What is the best way and what should it be? I have adjustable...
  9. W

    picked this up!!

    I picked this up the other night! Built t56, aluminum driveshaft, crossmember, etc. Still need to pick up a new MGW shifter, new shiftknob, clutch disks for my current clutch for 26 spline, and fluid. What do you guys recommend for fluid? Report this image ALSO. I will be putting a few...
  10. W

    tr3650

    I have a tr3650 from a 03 Mach 1 I want to get rid of. I was going to rebuild it and put it in my Bullitt but have a change of plans. When I bought the trans I was told it had a slight grind in 3rd but was good besides that. Asking $350 obo.
  11. W

    suprised some bikes!

    Saturday night I was cruising home in some perfect weather with my girlfriend when I ran in to a r6 and a gsxr600(think it was). Cruised next to them and the r6 got next to me and I heard him down shift and I followed. We both took off at the same time. And I pulled about 2 cars on him by 110...
  12. W

    Running rough on hot start up

    So my car has slowly started to do this more and more and now it does it almost every hot start up. When I start the car cold there is no problem but once the car is up to running temperature and turn the car off then start it again the car runs rough for a while. My air/fuel ratio goes to 18 at...
  13. W

    Bullitt vs auto c6

    So tomorrow night I may be running a auto c6 making 440rwhp. Apparently he pulled two cars on that cobra I raced last weekend for those of you who saw that thread. What do you guys think will happen? If he shows up I'll let you guys know how it goes!
  14. W

    Quick run in with cobra

    Out at a carshow today and went cruising today. Was able to get two quick pulls in with my buddies 03 cobra vert. He has full exhaust pulley and tune making 450rwhp and 470rwtq. First run was in 3rd from 60 and let off at the top of third put about a car on him. Next race was from 40 through the...
  15. W

    3 autometer gauges/pod FS

    I have 3 auto meter ultra lite gauges and a speed of sound radio gauge pod for sale. The 3 gauges are oil pressure boost/vacumn narrow band They were in my brothers car for only a few months. When he wrecked it he pulled the gauges real quick and I bought them off of him. They have sat in my...
  16. W

    r888 for the strip

    Well I have some toyo r888s on the car and will be heading to a test n tune this weekend. Anyone have experience with these at the strip? The best pressure to run them at? How do they hook? How much of a burnout? Thanks
  17. W

    ran with a 2012 r6

    Going to start off by saying the car is running really strong with the cold air. Was in the 50s:) Well on the way home with my girl I saw this bike and we started messing around. Ran from about 60 3 times so I was in 3rd Each time we stayed dead even until about 110 when he would shut it down...
  18. W

    01 bullitt vs gtr

    Just got back from racing a friends buddy in his gtr. He didn't say all his mods bit he was running 15# at the time. We ran twice from 40-130. He pulled about 3 cars on me each time. I was very surprised with how I held up. If I ever get to build my trans and up the boost we are going to run...
  19. W

    toyo r888

    I just ordered a set and they should be coming in this week. Will be running 315/35/17s. Just trying to get a ball park on what to run for my pressure in the tires? What do you guys recommend for street use? and strip use if I decide to take the car. The car is making 498rwhp. Thanks
  20. W

    Need 2 315/35/17 toyo r888

    How much can you guys get me 2 of those tires for shipped to NC 27526? I found 2 sites one is 590 shipped and the other 601 shipped. Thanks
  21. W

    FS: Slicks and wheels

    I have a set of Summit fast five wheels and good year slicks for sale. Practically brand new. Been on the car 2 times. Once for fitment and the other was 4 passes down the track. The rims are tires are screwed. The good year slicks are 28x9 and the wheels are 15x8s. I had them on my 01 bullitt...
  22. W

    quick run in with a z06

    Well had my first run in with a c6z06 today. We did to quick 40-95 rolls and each time we stayed even until I shifted to 3rd then I would keep my front bumper at his back bumper until we shut it down. Got to talk to the guy real quick and he said his car wasn't stock. I tried to ask what he had...
  23. W

    back to the dyno friday!

    Well since last time on the dyno the car wanted to keep pulling but ran out of fuel at 6500rpm. So I got a AEM 320 pump and put it in last weekend. Going back to the dyno to see what it will make now. Hoping to break 500rwhp this time since last time it made 498rwhp. Once I see what I make I...
  24. W

    15x8s with hoosier DOT drs

    I have 2 15x8 black cragar soft 8 wheels with hoosier D.O.T Drag radials 275/60r15s on them. Both wheels and tires are almost brand new. The tires have 4 passes on them. They hooked great. Im selling to get a set of matching big and littles with true slicks. Looking to get 400 OBO. Thanks email...
  25. W

    blown bullitt first time out

    Finally got out to a 1/4mile track for the first time this weekend. Car is built and has a paxton blower on it making 498rwhp. I am running toyo proxes tqs 315s out back. Best run was a 12.04 @120 with a 1.93 60ft. My mph was consistent from 119-121mph. The car still has more in it just need a...

Top