Search results

  1. allicedout

    Supercharger coolant expansion tank question

    Good day everyone, I am trying to find out the fitting size on an OEM or Canton supercharger expansion tank for a 2003/04 Cobra. I own a 2021 Mustang GT and am in the process of installing an Edelbrock E-Force supercharger. Unfortunately the kit came with a plastic expansion tank that is prone...
  2. allicedout

    Reuniting after a few years but having account problems.

    Hoping an admin can help me out. I sent a few emails from the "contact us" at the bottom but no ones replied. So here it goes... I have not been on this site for many years after I sold my Mustang. I recently purchased one and wanted to get back to this site. Unfortunately I forgot my...
  3. allicedout

    Rim does not seat on one side

    I have a buddy who bought used wheels, all the wheels fit fine with the exception of one on the front. The rims doesn't seat unless a 5mm spacer is used on that side. I asked him to switch left to right to see if it was the rim or car. The rims did the same thing on the same side which...
  4. allicedout

    20x9 +25 offset 20x10.5 +45 offset..... Will it work?

    Picked up a set of wheels before doing some homework and wondering if this is going to work. The fronts have 265/35/20 on them and after putting them in there's no question they'll rub. Based on all the calculators I've looked at I should be ok if I switch to a 235/35/20. But looking at the...
  5. allicedout

    Couple of pics from Woodward weekend

    Few pics from my weekend trip to Woodward.
  6. allicedout

    Highway cruising in Roush TVS Supercharged Mustang

    So recently had a Roush TVS installed on my 2011 Mustang. Took approx 5 revisions from my tuner to get the car to idle correctly, anyhow that's all solved, car drives great. Last night driving to a car meet on the highway I noticed when cruising at highway speeds the car feels like it's...
  7. allicedout

    Dyno tuned Coyote...... some issues still need to be resolved

    Hey everyone, recently installed a Roush TVS 2300 on my 2011 Mustang GT 6mt. During dyno tuning we had a hard time getting the car to idle, It would stay around 1000rpm, once that was corrected we found the car was slightly surging under no load. When we loaded it up it was fine. Anyhow...
  8. allicedout

    2011 Mustang GT Roush supercharged pics and dyno run

    2011 Mustang GT Roush TVS 2300 supercharger 82mm pulley JLT big air CAI VMP Triple pass heat exchanger with dual fans VMP BAP DCT Tuned Car made 585/525 www.youtube.com/embed/qnn9tSfHlWo
  9. allicedout

    WTB Autometer Cobalt or Ford Racing Boost Gauge and Electronic Fuel Pressure Gauge

    **UPDATE** Autometer Boost gauge has been found so I am now looking for an Autometer Cobalt series Electronic Fuel pressure gauge. Looking for 20psi boost gauge and an electronic fuel pressure gauge in either Ford Racing or Autometer Cobalt series. I'll take either or and if you only have...
  10. allicedout

    Installing Innovate Air Fuel Gauge - Whats the best location for O2 Sensor?

    Hey guys I have a 2011 Mustang GT 6mt, getting a Roush supercharger installed in the coming weeks and need to install my Innovate Wideband A/F gauge. Where is the best place to weld on the O2 bung on these cars? Thanks.
  11. allicedout

    WTB SOS Dual gauge A pillar

    ******FOUND****** Looking for an SOS Dual gauge pod for my 2011 GT. Dark charcoal color prefered. Send me a pic and price shipped to 08061. Thanks.
  12. allicedout

    Coyote 2.3L Whipple install. Need advice on setup.

    Hey guys finally dropped the hammer on a used Ford Racing 2.3L Whipple supercharger for my 2011 Mustang GT. Would love to get some advice on pully size, best CAI and anything else you might think necessary before the install goes down. I would like to collect as much as I can and have it all...
  13. allicedout

    Boss Manifold installed and dyno tuned...... results are in.

    So last week I installed a Boss manifold and Steeda CAI on my 2011 Mustang GT, 6mt. Mod wise the car has only the Boss manifold, Steeda CAI and Borla cat back exhaust. The car was tuned up here in Ontario by one of the best, if not the best tuner. Weather that day was not as co-operative as I...
  14. allicedout

    Installing Boss manifold... Replace TTY bolts??

    Hey guys I got my hands on a used Boss manifold and plan to install it this week. I'm told that TTY bolts should only be used once. Has anyone here replaced the hardware on a used set up? If so how do you remove the ones that are on the manifold? thanks.
  15. allicedout

    Would you trade a 2011 Coyote for a 1st gen Viper?

    I have an opportunity to trade my 2011 Mustang with 50,000km for a 1994 Dodge Viper RT/10 with 64,000km's. The dealer is offering me fantastic money on trade and the Viper would cost me few grand. I know the Viper is a no frills car and not a daily driver. I find I drive my Coyote less and...
  16. allicedout

    WTB Boss 302 Intake Manifold

    Looking for a Boss 302 intake manifold. Please let me know what you have and how much shipped to 08061. Thank you.
  17. allicedout

    WTB ARH Longtube headers 1 1/8" for 2011 Mustang GT

    Like the title says looking for a set of ARH long tubes with 1 7/8" piping and preferably with catted X or H pipe. Need it shipped 08061. Please send pics and price of what you have. Thanks.
  18. allicedout

    Would you trade a 2011 Mustang GT Premium for a 2001 Doege Viper RT/10

    Been back and forth at the Dodge dealer looking at a 2001 Dodge Viper RT/10. Car is in excellent condition, 76,000km (Canadian car) asking $34,995 Canadian. Now I was hoping to trade in and pay a premium of $6000-7000, but it seems its more like $10,000. My Mustang is a 2011 GT, premium...
  19. allicedout

    2012 Boss 302 Recaro seats in 2011 Mustang GT

    I have an opportunity to purchase Boss 302 Recaro seats from a 2012 Boss. I understand there was an airbag change mid production but my source from Ford tells me that the airbag module remain the same and therefore should not effect the function of the airbag. Has anyone done this swap? I...
  20. allicedout

    WTB 20" staggered wheels, with or without tires - MEET AT WOODWARD

    Looking for a set of 20" staggered wheels for my 2011 Mustang GT. Prefer without tires as I've got to drive back to Ontario, Canada with them in the Mustang, but if tires are mounted and we can fit them in to the car I'll take them. I've got the entire trunk, back seat and passenger seat so...
  21. allicedout

    WTB Saleen upper grille 2010-2012 Mustang.... Meet up at Woodward

    Looking for a Saleen grille for 2010-2012 Mustang GT. Can meet up at Woodward Friday or Saturday.
  22. allicedout

    Suspension or steering problem?

    I've got a 2011 Mustang GT, just lowered on H&R Supersport, I get this noise when I turn but only after 15-20min of driving. I suspect the upper mounts as there still factory but just wanted to see if anyone may know exactly what this may be. Thanks in advance. http://youtu.be/Ujxtjxk6GtY
  23. allicedout

    WTB Boss 302 front fascia and splitter for 2011-2012 Mustang

    Looking both the Boss 302 front fascia and splitter, but will take either or if you have. Please send price with shipping to Ontario Canada if possible and if your willing to ship it as a gift, if not quote with shipping to NJ 08061. Thanks.
  24. allicedout

    WTB Borla Atak or Corsa Xtreme axle back for 2011 Mustang GT or trade for Corsa Sport

    Looking for a set of Borla Atak or Corsa Xtreme axle backs for a 2011 Ford Mustang GT. Need shipping to 08061 New Jersey. Willing to trade for Corsa Sport axle backs in excellent condition. Let me know what you have and how much including shipping. Thanks.
  25. allicedout

    Wtb roush 7 bar upper black billet grille (10-12 gt)

    Looking for a Roush 7 bar upper grille for 10-12 Mustang GT. PM or reply here how much you wan including shipping to New Jersey. Thanks.

Top