Search results

Front lower control arms with less than 4000 miles on them, $40.00 takes the pair. Not sure if 10 through 14 are the same parts. Shipping and PayPal fees not included.

New 6 point bolt-in roll bar for S197 Ford Mustang 2005 - 2014. Wolfe Race Craft : 4130 Cromoly 6 point roll bar Gloss black powder coating Removable low slung swing-out bars (Rt and Lt sides) 2 swing-out end cap covers $ 1000.00

Ford Racing M-1007 DC1895 OE 2010 GT500 Wheels and Tires. Fits 2005 - 2013 Mustang GT and V6 models, 2007 - 2012 GT500 / Does not fit 2013 - 2014 GT500's. 5 - Lug 4.5 bolt circle 7.125 Backspacing 45mm Offset 18 x 9.5 Nitto NT555 with 8/32nds tread life on all 4 tires Vehicle is stored in a...

I've recently converted to e85 and a return fuel system and have my drivers unplugged. As a result I'm getting P1233 and P1234 DTC'S, in doing searches I can't find any info on turning them off. Will these codes cause any future problems?

Completed a VMP Gen3 with 2.6 pulley and return fuel system upgrade running e85. Very pleased with the conservative performance results of 775 rwhp and 756 ft. lbs. of torque. Joe @VMP did his magic with a very in-depth dyno tune; the weather also cooperated with a 79-degree day and low...

I've been researching several kits out there and the crank is an included part, my thoughts are to use my stock crank and have it doubled keyed if possible. Am I in the ball park with what i'm thinking?

Dual plug n play fuel pump boosters for 07-10 GT500. Boosters have less than 1000 miles on them. $400.00 Shipping, Insurance and Fees not included.

Switching to a return fuel system on my 2007. My question is do I remove the factory fuel lines or cap and leave them alone? Also for the 2007 - 2009 crowd that have switched, where have you installed your regulator?

Looking for a 2013 - 2014 intercooler, M-6775-MSVT, must be low mileage part. respond to: [email protected].

I just purchased an E85 Division X kit from Lethal Performance and was hoping to get some regulator placement feedback from those who have converted. I have an 2007 GT500 and Lethal's instructions say placement is left side on the firewall, I really don't see the room. I ordered it with...

BOGO...Two rear Bogart 15x10 R/T's, $700.00 minus slicks and center caps, does include 10 long shank lugs. Shipping and PayPal not included.

I have an 07 with a pair of 17x5's for the front and my height options are 26" and 28". Just want to get an idea of what everyone's running. I'm leaning 28" for front end clearance with the trailer.

Are NGK TR6 plugs one step colder than 07-09 factory platinum plugs?

Anyone know the difference between Brisk GR12S and GR12YS spark plugs? I've seen both of these part #'s for GT500's running more than stock boost.

DESCRIPTION ◦ 2005-2009 Ford Mustang GT4.6L/GT500 5.4L Exhaust System ◦ OEM x 3" Stainless Steel Exhaust System with Kooks Polished Race Mufflers and 4" Slash Cut Polished Tips. ◦ For Use With Kooks Headers and X-Pipe or H-Pipe or Factory OEM Exhaust System ◦ These products are NOT...

Suspension items removed from my 2007 GT500 with approximately 2500 miles on the parts. Switching to a more drag race oriented suspension. Bilstein HD Series shocks and struts FRPP M-5300-L springs FRPP M-5570-A jounce bumpers J&M Caster/Camber plates $675.00 Shipping and PayPal not...

FRPP axle back exhaust manufactured by Borla for Ford Racing. M-5230-SGT for 2007 to 2009 Mustang Shelby GT500 with 2.5” diameter inlet and 4” tips constructed of 304 stainless steel. $400.00 shipping and PayPal fees not included, exhaust has approximately 2000 miles of use.

Any gain to be had by going to a 3.0" exhaust? Have Kooks 1" 3/4 headers into a 3" collector running into a Kooks 3" O/R X-pipe. I was thinking about going to a Kook's 3" cat back. Currently I make around 700 to the tires on 93 and around 750 on 110 with 18 to 19 lbs of boost. Any...

I purchased the BMR Drag Spring set SP075 for my 07 GT500 and the part # on the rear springs is SP012RE and if you reference BMR's website SP012 is for an 07 - 14 Mustang GT. Just wondering if I have the correct rear spring before I install them. I thought this spring set was specific to the...

First time out this year on the 1/4, broke in the new Mickey Thompson Pro Bracket Radial's, and finally hit the 10's.

Can the rev limit be adjusted with an SCT X4 or is that function adjusted by the tuner only?

I broke in my Mickey Thompson Pro Bracket Radials last night and finally got into the 10's. Using this as a baseline, next is to change the suspension and see what gains can be made.

Increased diameter sway bars for 2007 to 2012 GT500 Coupe, front is adjustable. Urethane bushings, links and mounting hardware included. Shipping and PayPal fees not included $225.00.

Getting ready to replace the clutch in my 07 GT500 and was thinking about switching my FRPP KR shifter to the MGW Gen 2, looking for Gen 2 user feedback pro or con. Hope to hear all opinions from street to drag race applications.

Bogart RT Series front wheels 15x4, 4.5 bolt pattern, 1 ¾ backspace. Includes 2 center caps and bolt in valve stems, lugs not included. These wheels are made in the USA and fit from a 2005 Mustang V6 or GT to 2010 and are in excellent condition. $300.00 shipping or PayPal fees not included.