I've got a Whipple and all the supporting mods, exhaust, etc... And it's got about 550 hp to the wheels and 21K miles.
Anyways, whenever I change gears, and lift my foot up on the clutch, it comes up kind of unevenly. I could swear that a while ago, it used to come up very smoothly, but now...
Ok.
So here's the deal.
Bought a Whipple with the after market TB pleneum type.
Bought a Billetflo TB and put it on there.
I just had a bunch of problems with it and so I ended up getting an Accufab. It's hot of the shelf and is in perfect condition.
I installed the TB properly.
I took...
Hey, I'm installing an accufab throttle body today.
I was wondering if you are able to read teh TPS Voltage with a Predator rather than with a Voltmeter.
If so, what is the acronym name that I should look for and what category would it be under?
Thanks very much!
I have a Red Billetflow Throttle Body for sale.
$330 Shipped
Basically, the TB works, it's just that I have not been able to get the throttle position sensor and throttle blade stop screw adjusted correctly and I'm tired of having to mess with it so I'm going to get something else.
If someone...
Hello...
So basically I've got a Billetflow Throttle Body and I also had my car tuned.
For those of u with aftermarket throttle bodies, you probably know that you can adjust the starting throttle position.
The person that tuned my car had the throttle set at a particular position.
I...
Hello..., I currently have a Whipple with an aftermarket TB.
I've set up the TB properly and everything, I just do not like it and nothing would make me happier than to just get the stock TB on.
I called Whipple a while ago and they told me that I cannot mix stock TB with aftermarket TB...
Hello. I want to switch from my aftermarket TB to my stock TB, just less problems overall. Does anyone have a Whipple Stock TB pleneum in good condition to sell me? Thanks!
Hello...
I have seen quite a lot of posts in this forum asking if anyone knows of a good place to get a tune in CA.
I just wanted to let you guys know that I went to Apex Motorsports (Bay Area, Nor Cal) yesterday for a tune and I really could not have come back happier.
My main post about it...
Hello...
Kind of a long story... But basically I had a Whipple installed last summer and I used an Internet Tuner for the tuning... The tune came out extremely bad. IE at 3000RPM the AFR was so rich that it was off the charts (below 10).
I had about 480rwhp and 390rwtq (yikes!) from tune...
Hello, I am selling my used KN FIPK. I am asking $50 shipped for it or best offer.
I'd estimate that it has been on the car for 10K miles.
The reason I am selling it is because I decided to just by another FIPK.
All of the parts that come with the kit are included. There is a...
Hello, I am selling my used KN FIPK. I am asking $70 shipped for it or best offer.
I'd estimate that it has been on the car for 10K miles.
The reason I am selling it is because I decided to just by another FIPK.
All of the parts that come with the kit are included. There is a...
Hello, I am selling my used KN FIPK. I am asking $95 shipped for it or best offer.
I'd estimate that it has been on the car for 10K miles.
The reason I am selling it is because I decided to just by another FIPK.
All of the parts that come with the kit are included. There is a...
Hello... I recently had a Whipple installed with the "HP Plenum" and I have an aftermarket TB on there that I do not like but I do not really think I should say the brand name out loud.
So, I am trying to get my stock one back on there but I need a "Stock Plenum" from Whipple in order to do...
I have an aftermarket throttlebody and I am still in the setup process (IE messing with the allen wrench screw.)
I see that the consequences of turning it too far one way results in a sticky pedal. In other words, u press on the pedal but it will not move, but if u press a little harder, the...
(I need help very badly.) To preface, I had a Whipple installed with all supporting mods about 15 days ago. Everything has been working perfectly for those 15 days.
Yesterday, I had the car dyno'd. I did two runs and I the AF dipped below 10 (the minimum). I figured that is is a bad tune...
I recently upgraded to a JLT (Everything up to MAF) kit to go along with the KN I already had. Before the JLT kit, I had a Steeda Oil Seperator rigged up.
Now, basically, I do not really have a good place to put the oil seperator.
Any good ideas on how to keep oil from getting in the...
Hello. Earlier I called Whipple and they said that I can only use the Horsepower TB Whipple kit with an aftermarket Throttle Body (Billetflow, Accufab). I bought an aftermarket TB and I am not too crazy about it. I think I would rather have the stock one instead.
So, basically, my question...
I have noticed lately that there are a lot of GT500 vs Terminator threads. I personally have nothing against the GT500. I am basically just wondering if there has ever been so much dispute between the current and next gen Cobra. If not, I am curious as to why it is such a big deal all of the...
I just installed the Billetflow Throttlebody and drove it around to test it.
2 things seem to be not working right.
1. First, the pedal seems "sticky," especially in the 1-2K rpms. If I press down on the pedal, first it will not move, but if I press a little harder then it will suddently...
I am having a shop install the Whipple and everything is on and locked down, but they are having trouble getting the belt on. The manual recommends a 75.1" Gates belt (or the stock belt). I bought a Gatorback 75.0" belt instead. It does not seem to be fitting...
Does anyone have any idea...
Ok. I received every part that I needed for the Whipple installation. SCT2400, the SC itself, etc...
I had it brought in to be installed today and all that I need is another belt. Other than that it is done.
So, I am freaking out because I am not sure if the Whipple I ordered is...
So I posted a while ago about my BAP not working right.
It turns out that BAPs turn on only at 5psi, lol.
So, I just used a jumper cable to "disable" teh boost sensor thingy.
And now the BAP works absolutely PERFECTLY.
At idle, I was at ~22% Fuel Pump Duty Cycle with it set at 0%...
CLIFF NOTES AT BOTTOM. PLEASE HELP.
Hello. I have tried using the search function but it is not very helpful anymore since it omits like every word I put in, lol. Anyway, I had a boostapump "professionally installed" yesterday. When I drove back, it was weird bc I expected the engine to...
From my previous thread yesterday...
http://www.svtperformance.com/forums/showthread.php?t=279759
Basically, I lost a phillips head bit behind the plastic overlay that is right in front of the metal firewall (in the engine compartment.) (I was extremely le upset.)
So!!! Today, I biked...