This may be a stupid question but... if you get rid of the parking brake cable does the brakes on the hydroboost system still function as they should? I heard somewhere that it was a weird system and if you get rid of the parking brake cable the front and rears will not function.
Hey seeing if anyone out there has ever did a 8.8 with strange 9 inch ends? I want to buy a rear end off a guy that has one built. Question is there anyway of running oem brake brackets on the strange 9 inch ends, or is there a kit to make it work? Or do I have to run the strange brake kit to...
I am in the process of running the head cooling mod, and I am going to run a cobra engineering crossover delete set up. With that said since I will have a upper thermostat I would like to get rid of my lower thermostat and just run a hose directly into the lower radiator. Has anyone got rid of...
Hey does anyone know the brake fitting size that goes into the abs block? I tried the parts store 3/16th 3/8-24 but it seems that it won't stop the leak. It seems 1/2 shorter than the oem ones.
Hey everyone, wondering what is the best way to hook up a line lock on the 2003 cobra? I have TBM brakes line lock I am about to install. Could you simple take off the front line of the master cylinder and thread it into the line lock and take the outlet side and route it back into the master...
Hey everyone, I have a 2003 cobra with sra 99-04 rear end. I am looking at narrowing the rear on it to fit some meats under it. Question is has anyone narrow the rear to fit more tire? If so how much is it narrowed and whats your backspacing and how wide? I really am not into mini tubbing or...
Hey everyone, does anyone know the best place to pick up a 3v oil pick up tube? I like to get the better oil pick up tube while I am in the engine. I already got a moroso road race oil pan and just need the good tube with it.
Hey, wondering if anyone knows the best place to get cam tower bolts for the 4v? I am not trying to spend all that money on arp ones, I see no use in something that strong on cam tower bolts considering the tq is low. thanks for any help.
hey everyone, might be a dumb question but thinking of ordering a cowl hood for my 2003 cobra. I may need a little extra room with a intake I am thinking of running. The question is will a 99-04 gt hood fit on the 03/04 cobra or will it need modded? I notice the sites state 99-04 mustang but...
Hey .. I am researching head gaskets. I want to make sure I put the proper one on my car. It is 11.1 c/r with twin 62s, will max out mid 20s on boost and e85. Will be on the street a lot so which head gasket is a good one for my set up? I do have arp head studs...
Hey everyone... I am in the process of building my turbo engine. I was wondering should I replace the stock followers on the engine while I am in there? The engine had 109k miles on it. I did buy new adjusters just wondering if the followers is something I should do as well.
Up for sale is this aem water/meth kit. Can use to aid in higher octane or for safety features. It will help detonation in case you can't obtain higher octane. Kit includes everything needed. Will only come with 1000cc nozzle I dont have the smaller ones but can buy if needed online. Retails for...
Hey everyone, since I will be running a holley ecu should I stick with the stock coils or upgrade to smart coils? The car will make over 1,000 wheel hp when turned up. Is it a wise upgrade or am I ok with the stock coils?
Just seeing anyone out there has had good luck with the MS3Pro plug and play for the 2003 cobra? I know its been out for a few now so anyone with real world advice. Is it do a good job or any funny little things going on with it? thanks in advance
Hey everyone looking into building my 8.8 rear end. I have plans on doing 9 inch tubes narrowed, C clip kit on the ends, and maybe team z coil overs. I have GT style brakes on the rear and of course bracket to fit 15 inch wheels. My question is how did anyone adapt the mustang gt brakes on the...
Hey, looking for a locknstich full torque kit for the 4.6 4v heads. I would like to make the spark plug threads into 9 threads. I was hoping someone had this kit laying around they would want to sale or rent out. thanks in advance to anyone that may be willing to let go or rent this kit.
Anyone ever seen this much oil on plugs? I down a c/r check and it came out good, I replaced the rubber seals on the cam covers/valve covers also and still have this problem.... Checked out this picture and all plugs look the same.
Ok guys/girls help me pick twins. I had a 76/75 on mostly stock 2003 cobra and loved it but was time for upgrades. I know have a fully built engine. Specs are:
Teksid block
manley crank
monlar rods power adders
custom pistons .10 over 11/1 cr
custom turbo cams todd warren
light ported...
Hey looking into parts for a t56 magnum...
-SFI bellhousing
-stifflers adjustable crossmember
-Driveshaft that works with sra
-Clutch/flywheel that works with a t56 mag
thanks..
hey guys just looking around to see if anyone has short/ported 99-01 cobra intake they would wanna part with? Not looking for 6" runners more in the 9" inch range. thanks for your time.
Hey guys wondering when is a good time or right time to run a billet crank sprocket on a turbo car? Is anyone running those or is more of a supercharger deal? thanks in advance.
Letting go of my hogan intake for the 4.6 4v C head. This is a very nice piece that has extra fittings to put all your lines to on the bottom to make a clean install and is powder coated black. I was gonna run this with my turbo set up but decided to go in a different direction. This intake has...
Letting go of my raxiom LED tail lights for 99-04 mustangs, excludes 99-01 cobras. These are in good shape no broke pieces and all the hardness is there. Asking $300. These usually go for around 370 to 400 new.