Search results

6 years have past being a proud owner of an amazing 2012 Shelby. I loved this car. I truly thought I would own it forever. This was my dream car. Always got compliments and stares quite often. I Bought it when I was single. Modded it as if my hair was on fire. Researching mods, reading about...

Does this look like I have a bad shock? Both wheels are in the rear and the lower one is on the drivers side. I can barely fit 2 fingers on the gap. Both tires are at 25 PSI

I have a C&R HE with fans. Just recently got an Aero Force gauge and can keep track of peramators. My IAT2s are always 50* and above while driving. I have seen where others claim 30* above ambient. It's 65* today and I'm ranging between 110-120* IAT2. I also have a 170* thermostat. Any way to...

im pretty sure I need some new 02 sensors. I have gone through 3-4 sets in the last 5 years since installing longtubes. I have ran the stock motorcraft and NTK that Van sells If anyone knows why mine foul out all the time please chime in. My ex tuner blew a few and currently have VMP dyno tune.

I had a bogging issue and change plugs. I used NGK TR6 gaped at .28 CEL came back on misfire 1 and 2 cylinder. Cleared it and again misfire 1 and 2 cleared it and got a p2195 with no misfire. Now my car is notorious for needing new 02 sensors as it seems I need a new set every year. Is that...

i have had some bogging issues with a few misfire codes. I finally have some time to replace the plugs. I hardly ever drive her and hardly lift up the hood. I know know shame on me. But the first thing I noticed was the top right bolt was brown and rusty. My question is what bolt specs do I...

This truck has been through hell and back. I original bought it for my fleet for work with 36k miles. I'm a huge ford guy already owning a highly modded non dd 2012 GT500. When I bought the Lightning, It already had a few mods done to it. Interchangeable 4lb lower, coil packs, 4x4 pan, slotted...

SOLD For sale 42lb injectors $100.00

Yesterday had a few things to do so I took Her out for a spin. On the way home I was keeping an eye on the iat2. It was around 70* outside and I was ranging at 115-125 Iat2. I forgot to check out the ambient air outside. Looking back I had this issue last summer where I was ranging close to...

So this past winter I added a VMP high flow elbow, VMP 67mm throttle body and a 2.4 pulley from a 2.5. Before these mods I dynoed at 629/620 on the dyno jet from VMP at Shelby fest. Today I went to a dyno in town to get some new numbers finally. (Keep in mind that first stock baseline was...

Just got my truck back from the builder and took it to a tuner. Stage 3 heads and cams. Rest of the mods in sig. Well, cold start it misses but when it warms up it runs great. Figure that the plugs are too cold. Also at WOT the low and mid range power feels pretty weak but torque you can...

I just got my truck back from the builder and my brother took it to a tuner in his home town. The guy says he doesn't need the tuner to custom tune my Lightning. Well I was on the fence on this because I was under the impression you need a tuning device to upload tunes. Well I ask my brother...

So I have a rusty bolt on the front of my VMP TVS. Tired of looking at it. Anyone know the specific bolt size? Also has this happened to anyone else. Just curious. Thanks

I recently posted a thread about lower trap speed. After finally hunting down a laptop I got some data logging finished. Seems my issue is my downstream temps are 30 above ambient at idol and 50 above at WOT. 145+ at WOT. I ended up calling Van to help with diagnosis because I have a C&R H/E...

I have a brand new Red Drive Shaft Safety Loop made by BMR. Never used. I have a GT500 and this one does not fit and need a different one. http://www.bmrsuspension.com/?page=products&productid=946&superpro=0 Will take 95.00 plus shipping. Only take PayPal. Thanks

Last year I went to the track and ran a 11.8 @ 124 mph. NT05R tires. Mods in sig. 623/629 with stock elbow and stock TB. No LCA or brackets or clutch I have recently added the VMP elbow and 67mm VMP tb. Clutch, BMR LCA with relo brackets. Went to the track last night with Hoosier QTP 28 x...

I have no compression in cylinder 4. Could be a leak head gasket etc. but gonna go ahead a rebuild the bottom end. I called a local performance shop who acts like they are to busy to give me an estimate. The hell with them. Any body have any suggestions on who to call or use? I love in...

3.0 stock look pulley 40$ 2.5 stock look pulley 75$ SOLD Obo PM for pics

I just installed VMP high flow elbow and 67mm tb. Car seems to lag after install. Mainly on wot pulls. I have been told by several people I do not need a retune. Any recommendations?

I just recently got a RXT clutch installed by a local shop. During break in 4 codes popped up that I have never dealt with before P0135- 02 heater circuit bank1 sensor1 P0155- 02 heater circuit bank2 sensor1 P0403- Exhaust gas recirculation control circuit P0443- Evaporative emissions...

I did the search and found threads from 5-10 years old so not sure if there are new options. Anyone have a link or part number? I do not want OEM fogs. Thanks

Took the car to the track the other night. I am running 26x10 slicks with on 15inch race stars. Just recently installed BMR LCA with relo brackets for the eibach sportline springs (next mod is drag springs). Had the tire pressure around 12 psi. Launching is not the issue. Pulled a few 1.7 and...

Just a little history..... Before my Shelby, I owned a nicely modded M6 3.73 11 5.0. I worked my way down to a 12.054. http://m.youtube.com/watch?v=hoo1HGzVDJQ Then came the issues. I bought a Barton bracket, then came the 1-2 shift lockout in the crappy MT-82 which only happened at the...

Went to a test n tune tonight. Once I shifted into 3rd, there was a short delay before the rims kicked in and same thing into 4th gear. Also last year when Justin from VMP Dyno tuned my car he said my clutch was slipping. I do not know what that feels like so that is why I am asking here. Also...

This will be my 3rd year in a row attending the Mid America event in Tulsa. Would be nice to know who all is coming for the cruise, hallett, drags, and show. I plan on cruising on Thursday, dragging both Lightning and GT500 on Saturday and possibly showing on Sunday. Can not wait to do some...