Search results

Michael tore us up and we're 90 miles inland.

No. 1 buck shot way more pellets than 00.

:rockon::rockon::rockon:

xx

I took back the stock pulley record. The second and third runs were not as good as I had hoped. I did get a new best 60' on the second run, 1.746. Nick, you've got some catching up to do. Oh, and I had the skinnies on this time. It was fun. Mr.Ned

The local club had a dyno day today. Here's the sheet. The a/f is a little off, but I think that's because of the tail pipe sniffer. When I had it dynoed before with the o2 sniffer on a mustang dyno it was 11.7. It made my day none the less. He ran the boost on the second run. Not to bad for...

I went to Breakaway near Panama City yesterday, and ran a new best in the 1/8th. Here's the slips, best run on the right, nephew rode with me on the second run on the left. I taped the cardboard templates of the drag grills on...

Here are my time slip(they are backwards) and vids from my trip to the local 1/8th. I told my wife I was gonna do a hellacious burnout on the first one, poor bike rider got the brunt of it and I forgot to roll my window up. The other one if you listen you can hear to pops from the car in the...

I ordered a billet battery mount for the optima, what size counter sink bolts do I need?

I cut out some templates of the grills to make some drag grills. My bro-inlaw makes signs out of corrugated plastic and will make the grill covers and put in some grommets that I plan to use toggle bolts to attach to the grills. Do ya'll think these will work, or is it a waste of time and...

I know this not the proper forum, but thought maybe some of you have experience with a new track. The local 1/8th just went through a total refurbishment. New concrete from the water box to the 330' and new asphalt to the end of the shut down. They are due to open April 1st. I'm thinking that I...

I just got done installing the qa-1's on the front of my '99L. I found it was alot easier and quicker to not put the jack stands under the lower control arm. I put one under the frame for safety, and used my cheapo floor jack to hold the truck up. After you remove the stock shock, use your stock...

I bought the line lock kit from the How To, and installed it just like in the instructions. I even ran a seperate ground from the earth side of the switch to where I ran the ground wire from the controller. I ran the hot wire with the in line fuse to the supply side of the switch and the other...

I ditched the steel stockers for these babies. $250 mounted. They are Pacer 16x10. Now I need some front runners.

I got this today at a steal, $200. My neighbor just bought a new truck and took this out of his trade-in. It's less than a year old. http://www.audio-warehouse.com/web/mdl/CQVD7003U/detail.asp

You gotta see this. http://video.google.com/url?docid=656193898147576910&esrc=sr1&ev=v&q=wheel+chair+back+flip&vidurl=http://video.google.com/videoplay%3Fdocid%3D656193898147576910%26q%3Dwheel%2Bchair%2Bback%2Bflip%26hl%3Den&usg=AL29H21HAc6-qRBy8s-5Aqu1d32Z4tt4dg

Sold Sold Sold!!!! I've got 4 99 stockers I need to move. I'll sell them in pairs($150) or all 4($300). You pay shipping. I will only accept a U.S. postal service moneyorder. All prices are FIRM and I will not pick wheels for you as they are all in comparable condition and boxed ready...

When I got my chromes a few months ago, I had them balanced with sticky weights. I noticed on heavy braking they tend to shimmy, mostly the left front. The stock wheels had the lip weights and didn't do it. Is this bad balancing or bad rotors?

I did it again, another best on the stock pulleys, I'll post the slip tomorrow, I have to figure out how to download from this new camera. Here's the time. 60'-1.84 1/8-8.157 mph-85.7 1/4-12.79 mph-105.4 The temp was about 40-45, with a 5-10mph crosswind. I'm as happy as a fat pig in the...

Let me start off by saying that everything was in my favor. Temp50 degrees, DA (-1005 ft.) and track prep. Some of you don't know my mods or lack thereof. The list is the basics, mail order chip by JDM, 90 mm MAF with filter, shorty header/catless basanni exhaust, ds loop, ftvb, Jays...

The stud in the pass. side floor, how do you remove it? Looks like you need a special wrench to go over the stud and into the mount.

A young kid (22-23) moved next door to me and was telling me he owned a 03 Cobra before he moved here. He told me he had a custom dual Holley 4b setup with a big shot of nitros running 9's. I questioned him about his tuner and he said it was Mickey Johnson from Jax. Fl. I smelled BS and brushed...

My pass. side cat started rattling yesterday. All my exhaust is welded from the headers to the x pipe, and it's a 2 cat Bassani system. I couldn't see a no. on it, but the drivers side had no. JA/CE99000. Any idea if it's a Bassani cat or what it might be and where to buy a replacement? I'm not...

WTB 2" shackles for a 99L.

This is from Sun. a SGMP in Valdosta,GA. I've ran the 1/8th, but these are the first 1/4 times.I'm in the right lane on both. My mods. are chip, filter, exhaust,ftvb,t-bars, and et streets. Some of you might have seen this on nloc. Staged 1st run 2nd run.