Search results

Pending Sale on complete car, deposit has been received. Just settled with insurance company on my 03 Cobra Vert with only 22,000 miles. Damage to front end, tweaked the frame. No damage to drive train or interior, most everything behind radiator is good. Let me know what you need.

WTB 03/04 Cobra differential, I want the whole center section. Let me know what you got. [email protected]

What is the most HP anyone is running on a stock 5.0 block? The dyno numbers show i overshot my goal for HP and now I am concerned about splitting the block. I hate to think of running NA when everything is setup for FI. I would like to know the highest HP anyone has on the stock block and it...

I had made a post pervious without the video. The first part of the vid is just the engine and lope at idle. The day time run was on pump gas tune. The night time run was first run on Race fuel tune. It came up so fast, I got off of it, thought I was going to the bumper. Click here to see Video

Last night at the track my 86 GT was putting down some good times in the 1/8th 6.33 and 6.36 @ 109, limped on to 10.1 in 1/4. I decided to make a run at less than 10 in the 1/4 so I dialed in a little more timing and made a strong burn out, and footbraked it as hard as I could, WOW did I get a...

Had a flight this morning, when I got the boarding card it showed the reservation number as: RICE2U. I did not know if this was some sort of message or what, good thing it was a good ole US built airplane.

The build should be done in the next 4 weeks or so. I haven't built one since 1979. After a short "break in" I will tune it on the dyno and post the results. Here's the build; If you need more specific info let me know. Car -1988 GT Dif - 373 positrac trans - TKO Engine - 347 stroker with...

How do you do a poll in this thread?

I have previously posted issues with pegged MAF (5.0 volts) when I changed the blower pulley. Most have felt this should not have been possible and I had some other issue. On the dyno, using a data logger and voltmeter this condition was verified. I have now found the culprit for this...

Got a grill for Christmas from my son, stuck it in the hole to see how it looks, what do you think? i know the Cobra is a little off center but not attached yet.

My first tangle with an LS1, top down, son with me. Camaro with open headers was playing with me rolled the window down and said let's go. Side by side ~ 30 MPH roll, he honked 3 times and hit it, I stomped it in 2nd, got a little loose and then hooked up. By the time I hit 3rd I was already...

In all cars of my past, I always adjusted the clutch to have a small (1/8") gap between the TOB and pressure plate. Is the 03 Cobra different or should it have a gap?

Anyone that has installed the UPR 3 hook extreme quadrant and FW adjuster I have the following question. Were you able to get 1/8 inch TOB clearance and have the clutch engage further off the floor than the stock setup? I used UPR quandran part # 3004-K-EXT, I added a spring to pull the TOB...

Anyone ever entered your car in the World of Wheels? If so, what are they looking for in the judging? My car will be representing the local Mustang Club in the World of Wheels, I have never had a car in there and wonder what type of things I shoud do to get it ready.

Yesterday on a back road, I had a late 80's Z28 with exterior mods, suspension, and exhaust (don't know what in the engine bay) feeling frisky. He was in front of me kicking and letting off to get my attention. I shifted to 3rd (~ 65 mph), I saw the puff and got on it. I was beside him when I...