Search results

Just wanting some opinions on what my L is worth and if I should sell. I have a black 99 with 52,000 original miles. The paint isn't in top condition with several small knicks and the clearcoat is running pretty low. Bottom of the front bumper is scratched up a bit. I bought the truck in 2004...

My pass. side cat. converter is clogged. I have Bassani HFCs. I need some suggestions... Can I have it gutted? I've also read of putting a pipe through the converter... Would that be better? OR do I have to buy another one? And does anyone know where I can get one?

I have the FRPP kit installed on my truck which should be 1"/2" but looks way more then 1" in the front. It's lower in the front because I took out the stock spring spacers and it looks like that gave me an extra 1" in the front, if not more. The rear sits too high and I want to level it out...

I am getting DTS trouble code: "9602 PATS Received Invalid Format of Key - Code From Ignition Key Transponder (Partial Key Code)" I had a remote start installed about 2-3 weeks ago and the truck has been having start up problem for the last few days. Does this mean I will need to remove the...

I'm trying to get my 87-93 GT lights but the wiring is different and I don't want to mess with the wiring. Does anyone know the part number for the pigtail adapter and where to get it?

no delete button :rolling:

I'm posting this for a friend. FOR SALE: Accufab Polished Throttle Body - Used/500mi. All reasonable offers will be taken into consideration. It is located in Houston. Anyone interested in the throttle body, please e-mail the seller at [email protected] for questions, offers...

After a long day at work i went to the parking lot to find this... :cuss: :cuss: I'm glad the paint wasn't scratched or anything, at least I don't think it is. Will I be able to order a new door handle from ford? Is it fixable? And does anyone have a part number?

Can anyone tell me if these fog lights will fit a 99-00 lightning bumper without any modification? Link "FOG LIGHT ASSEMBLY,87-93,GT,ULTRA CLEAR" TIA

I drove the L at night for the first time since putting on the new headlights and it looks like I forgot to adjust them to the right angle. They are facing in the down direction so I guess the screws were overtighten? Actually, i'm not even sure how to adjust headlights. I just checked out an...

Stock Parts FS FOR SALE: 99 Passenger side door handle, black, small chip by keyhole $10 + s/h Stock throttle body without TPS $20 + s/h 2* shims brand new $25 shipped Buyer pays s/h (box + peanuts) I take money orders, cash, and paypal (plus 3.54%) *Parts have less then 35k mi...

Has anyone bought the 01+04 headlights with clear corners that are sold on ebay? Or bought anything from "revotec" on ebay? The seller says that they will fit but not perfectly. That I would have to use sand paper to smooth the upper edge of the housing to make it fit on a 99 L. Can anyone...

I'm looking for a good rebuild kit, pistons/rods. There are two kits on ebay and I need to know which one makes more sense to buy if i'm on a budget, A or B. Do I really need a new crankshaft and bearings? And could this upgrade allow me to go into the 450-550rwhp safely or would I need...

The volume on my stereo won't go up. The volume button works because I can just barely hear it when I turn it all the way up. Can anyone help out? Maybe tell me where I should look for problems etc. :shrug:

I was tweaking my amps and had to move the passenger seat all the way forward.... and now it won't lock into position. :cuss: It moves up and down but it won't recline and lock into position, it just flings back forward towards the windshield. Anyone know how I might fix this, quickly.

Note: I don't street race, but I don't back down from a challange. The other night on my way home, driving in the fast lane, I noticed a DBL cab SS chevy truck in the middle lane. I past it up and noticed his decal, "Say When"-vs my 12sec decal. I wasn't trying to race but the bassani must...

Anyone know how much stage 2 cams and heads would cost and the best place to get them and/or how much a shop would charge to install it all. And does anyone here run that on the stock block? My dyno #'s were very disappointing after several mods, so I'm now considering something that SHOULD...

I recently installed my accufab TB. And today I noticed that I forgot to put back the return spring. :uh oh: Is that a bad thing? Well I put it back on only I'm not sure which way it's supposed to go. I went for a test drive and I notice that the gas peddle is stiffer, much stiffer. Is...

I think I may have stripped the two screws for the tps. Does anyone know there sizes and how I may be able to get them off? It's not all the way stripped but the more I try the worse it gets. :mj:

Anyone have pictures of an SVT bra? And is $100 a good price for one? Thanks

Last time at the 1/8 I made an 8.6 on f1's & no t-bars at 60*. I'm going for low 12's (1/4). How can I drop (at least) 6/10th's off my 1/8 times. I can't afford a built block right now. But a S/C (MP) might be within reach. I'm running a ported eaton w/4# and other small stuff. What would...

I have a project going on for school and I'm creating a website. Only problem is I don't know photoshop enough to make any graphics. Anyways, the website is to promote a new type of M&M, an oreo filled M&M. If someone can do a quick image that I could use.. anything to resemble what it would...

Hey everyone In the 4/5 mo. i've had my truck I haven't taken it to the track. My goal is to run low 12's no problem in the summer heat. I was dyno'ed at 350 with a chip, 4lb, and 90mm. Since then I added a ported blower, tr6's and HFC. And I plan to order my cat-back as soon as I decide what...

Can someone help me out with getting a sig? I'm a beginner, maybe intermediate with photoshop, but don't know enough to do my own sig. Can someone help out? Here's what I had in mind. A blk 99 L with a side shot, rear corner shot, or slightly angled front shot of it. With a background...

I need a little info. from guys who have been there before... My current mods are: 4lb lower, 4-way sct, 90mm, ported blower, HFC, TR6 plugs, and intake mod. I need help one which 2 mods, or in which order from these, I would benefit most from. I'm talking go fast parts. Options i'm...