Search results

From one day to the next, my cobra wont start. Battery is fine, even had a new one to install. Jump start does not help. All the interior lights and gauges turn on, but when I go to crank everything shuts off immediately. Any thoughts. thanks

Bump steer kits w/ new k-member Luckily I ran into a steal the other day and now need some additional parts. I got a Griggs k-member, A-arms, and bilsteins F/R with coilovers. I plan to lower the car about an 1-1.25 inches. I will be ordering MM CC plates, but also figured that I needed a...

I was wondering if I could get some help for the 99/01 crowd. My main passenger in my Cobra is my Brittany Spaniel "Bigfoot". I would really appreciate it if any of your could take a min to vote for him online. http://www.campbowwow.com/contest/PhotoContest/tabid/4370/Default.aspx Just go...

Well the R&R on my motor hasn't been the worst or best experience thus far. Cooling problems have been fixed, and now I'm onto another set of problems. Last week I pulled P0171 (Lean left bank) P0325 (cylinder misfire) P0330 (cylinder misfire) I found the tube going into my JLT PCV...

I found a pretty good deal on a CF hood, but was wondering how much it costs to prep and paint CF. Is it roughly the same as Fiberglass? Does it even take paint well?

Not as bad as Nazman's week, but I just stripped the bolt on my thermostat housing when trying to replace the thermostat. what a pain in the ass.

I recently installed aeroforcetech gauges and have been watching my water temps while fighting cooling problems. Anyways, the stock gauge will not read hot until you go over 250F. Lame

I just installed dual aeroforcetech gauges, but I need to set the warning light parameters. Im watching coolant temp fuel rail pressure Fuel Pump duty cycle where should I set my warning light levels ? Ill tackle the oil pressure sensor later this week. Thanks

This should probably be in the market, but I just wanted to put this out to the new edgers. Ive got a bunch of parts that are taking up space after my recent engine build. Ive got ASP underdrive pulley stock pistons/rods 2 oil coolers JLT CAI I really want to trade the CAI for a RAI...

My new motor was turned on today, oil/fuel pressure looked fine, water temps are good. The only problem I have is during acceleration. When I go75% throttle, the rpms jump with no acceleration, then drop about 500-1000 rpms and then it accelerates. Is this my clutch slipping? any thoughts?

I should be able to break-in my new motor by this weekend, but I have a few concerns. I read the following break-in method I found by searching old threads. http://www.mototuneusa.com/break_in_secrets.htm My new combo is as follows: JE Custom Pistons 9.2:1, 04 Heads w/valvejob and Crower...

I recently bought an 03 tank that came with the GT pumps. The guy said the pumps were working fine, but Im paranoid about these things. In about a week my new motor goes in the car and I wanted to swap the tank before hand. Is there anyway to test the pumps before I put in the new engine? BTW...

I just put the down payment on my motor rebuild. Nothing crazy. Custom JE (9.2), Eagle rods, stock crank. The heads are 04 Mach with comp valvejob, new (stock) valves/guides/springs and stock 99 cams. Anyways Im looking to get 525/525 out of a single turbo. Is it neccessary to buy...

I need to order some valve springs while my engine is being built and have not idea which ones to get. Setup: 04 heads, with 99 cams, and eventually 12-15 psi (max) from a turbo. Im looking for 7000rpm capable springs. Thanks

I was wondering if anyone could recommend an everglades tour. would it be better to be closer to FT. lauderdale or Naples. Any help would be great. Thanks

What do you do to stay in snowboard shape while waiting for the winter. Ive been considering a skateboard, but when I went to the store today they had a flowboard which felt much more like a snowboard. Anybody have experience with these http://flowlab.com/~flowlabc/osC2/index.php?cPath=29

I just moved to the North Port area and wanted to know whats going on here. I know the Bradenton track is not too far and will probably head out there soon. Are there any gun ranges in the area? other recommendations for outdoor activites or things to do would be great. thanks -G-

I was just wondering if Florida honors a Texas concealed handgun license? Is there a website where I can see the rules/regulations?Thanks for your time. -G-

Im not sure I understand how to properly select gears for a turbo setup. As I can gather, greater engine load leads to greater exhaust flow to spool the turbos. How exactly does a 3.27 gear place more load on the motor in comparison to a 4.56? I guess to simplify this, we can look at a 4th gear...

Im making my first trip to Texas Motor Speedway for the race this weekend and was wondering if anyone had some info. For instance, how is the traffic going to be (We will be coming from 35 and 635)? Anything to see before the race...etc. Any info would be great. thanks -G-

My 2000 superduty just showed code p1316 which is "Injector circ/IDM Codes Detected" What are IDm codes? can I drive this thing to the dealer? any infor appreciated

Posted this in the New Edge section but couldnt get a response With my stock t-45 and 4.30 gears it is possible to trap 125 mph at 7038 rpms in 4th gear. Is there a way to calculate how much hp I will need to do this? assuming a 1.5 in the 60'

With my stock t-45 and 4.30 gears it is possible to trap 125 mph at 7038 rpms in 4th gear. Is there a way to calculate how much hp I will need to do this? assuming a 1.5 in the 60'

This is what happens when you you take water in your motor. these are just the driver side pics, there is another one on the pass side.

Im rebuilding an engine for FI and want to install gauges when the motor is put back in. I want oil press, water temp, fuel press, wideband a/f, boost I dont want to clutter my interior with gauges. Is there a gauge out there that can monitor more than one of these functions. I dont really...