Search results

Yes!! They say Part Number CR3Z19980A needs to be replaced. It failed some kind of pin-point test or whatever - anyway, it should be installed in 2 more days!

Oh, that could be it…checking now!

Late reply on my part - Apparently the HVAC control (Part 19980) checks out fine. This is the console that is located at the bottom of the entire controls section. The screen's touch functions all work - Except the Power for the AC/Heat. The module that is Behind the screen is NOT testing...

I'll be visiting him later this afternoon to pry out some information...I'll let you guys know and like you said, hopefully, this is a rare occurrence!

I'm not sure as my mechanic is doing the work and research, although since there is a lack of info from him (language barrier?) I thought I would look for myself.

Does anyone know how/where I can find the item that allows my AC/Heat to Power On? My AC and Heat will not turn on - Apparently it is the Power Module (according to Ford) but they cannot find one, nor can I seem to get the correct part number? Your help is greatly appreciated! - Gary

Can anyone in the Houston area recommend a lawyer that specializes in personal injury?

The glass I have in my windows have a lot of scratches, so before I go to tint, I would like to replace the glass...do I go with a local glass dealer or ford or do you guys tend to order repacements?

Well, I have done it before and wow do I get a headache, but I am getting ready to drive for nearly 20 hours and I need to quiet down the exhaust note. I don't have any of the 4 catalytic converters in the car, stock mufflers, and an x-pipe. Here are a couple pairs of cats I am looking...

It seems after my last oil change (and I have forgotten which filter I used) the oil pressure is high...the needle is at the "A" in "NORMAL". It's fairly steady at that point no matter what kind of driving... It would also be interesting to know the psi value if anyone knows... Thanks in...

I am looking to get an I-Phone and I see the competitors have some decent phones, but I think the quality and functionality are not quite as good. Most of all I am looking at Web browsing and the clarity of the screen. There is a new phone release this weekend, the Palm Pre, that is supposed...

I recently seem to have lost the center cap to one of my Saleen wheels. I have found a few sites that carry center caps for wheels, but the black ZR logo looking one...I would appreciate any ideas...thanks! I don't have a close-up picture of the wheel, but here they are on the Cobra:

...and re-attach it? I stuck the stainless letters on my new black paint...oh man does it look good...but, a gremlin got into my garage and moved the "A" up, so now it looks bad! How do I get the letter off safely and then re-attach it? Thanks for any help!

Mine isn't working and I tried a bunch of fixes...hopefully someone out there is selling so I can try that route! Thanks!

I have the standard setup and am getting ready to add an intercooler and increase the boost. Using a 2.87" pulley, what belt size will I need? Also, what MAF would you recommend? Thanks for the help!

Hey guys!! I am without bumper, so I thought now would be a great time to install an intercooler on my '97...There have been some great threads on installing intercoolers but without the search function, I cannot find the threads. Any of you have some useful links? I have the stock(ish)...

After owning an SCT Xcal2 for several years with my '97 and another for the last 1/2 year with the '03, I finally did some datalogging...it's really pretty cool to watch the various parameters change. My problem is I have no earthly idea of what I am looking at!! So, if I were to send a file...

I am trying to find a business (unfriendly kind of place that owes several members here merchandise) address in Los Angeles. I am happy to PM the number to you if you can help...thanks!

The #7 spark plug is showing up like its been burning all over...it's black...so I replaced the plug and the coil-on-plug and am still getting the same result. All the plugs are gapped the same so I am at a loss as to the problem...could it be the wiring harness? Could the piston be bad...

I need to replace 1 coil-on-plug and the Ford dealer here wants $179.99!! I have found sets of 8 for $129.99!! So where can we get a single coil-on-plug? Thanks in advance for the advice!!

Car has Sold! Price Reduced to $15,000 - Includes Shipping! I am selling my 2003 Mustang Cobra Coupe. I have moved to the Colorado Rockies and it does not make sense to keep 2 Mustang Cobras during the long winter months. If you have never driven a car with a roots-style blower, you're in...

Well guys, I took a new job in Grand Junction, Colorado for which I leave Houston next week! Grand Junction is on the western slope near the Utah border, or 4.5 hours west of Denver. Ski passes will be purchased for Vail resorts...we've found some snowmobiles we're interested in...lastly, I...

Jimmy was hopitalized last night with severe bleeding in the neck (some kind of rupture) but was moved out of ICU a short time ago. He is expected to recover but he and his wife were pretty scared there...he had a blood transfusion last night and things seem to have settled... Thought I...

After 3 attempts, I finally got my '97 on the dynojet and was thoroughly disappointed, although glad to have the results. Car dynoed at 336 Hp, roughly 65 Hp lower than my peers' setups. Worse, though was the a/f was 13.5 across the rpm range!! If I remember correctly, this is too lean for...

Well, the cam roller follower in Cylinder #6 popped off again. I took the car to another shop and their opinion (after removing the valve cover) is that the cam needs replacing due to excessive wear on the lobes. Apparently the amount of metal that has shaved off the lobes over time is too much...