Search results

I had a painted lower grill busted out Friday night. I would really like to replace both the body colored grills with factory black. I can't find any good prices. Where is the best place to get factory grills. I'm not really in to the billet grills. The second pic is what I'm looking for. Sent...

What kind of lug nuts are everyone running with their Matrix 5's? Centerline's website has a regular acorn and a duplex acorn. I bought the truck with a set of aftermarket wheels and the lug nuts are pretty rough looking. I don't know if they are the the stock ones so I am afraid to bolt on...

Anyone have any ideas as to why. When I hit the switch the starter just clicks. I replaced the starter with a brand new one and I still get the same thing. I can roll it off and it will start right up. Once it is started and running I can shut it down and restart it again over and over...

I picked up a set of Centerline Matrix 5's a while back that need to be polished. I was thinking of having them sent out to be polished and clear coated so I will not have to polish them again later. Has anyone ever tried this before? Is it a bad idea? Does anyone know someone that can do...

I am looking at getting some tires for my used Centerline Matrix wheels. I run the Kumho XS on my Cobra. It has a 180 treadware and picks up rocks and road debris pretty bad but drive amazing. When driving across a tar and gravel parking lot or even a road that has been tar and graveled they...

Does anyone know who makes or used to make this idler setup? I think the bearing is going bad in the idler pulley. I have a noise that is coming from that area and there is some play back and forth in the pulley. I am trying to figure out where I can get a bearing to fix it.

I pulled the cover off of the rear on my L and it looks like the factory trac loc is still in their but it if it is, it is missing the S spring. Is there an aftermarket limited slip that is not fully machined so it would look like a trac loc? It has what appears to be clutches on each side of...

I have a roaring sound coming from the rear of my L that I assume is the wheel bearings. I have read that these trucks are hard on axle bearing anyway. Do they make a better aftermarket bearing or do I just need to order factory replacements? Where is a good place to order repair parts? What...

Can they be replaced without removing the hub? How far down do you have to take the rear apart to get a new one in? I searched but the only thing I could find was for the front.

I have been running chrome 03's with the included extended reach lugnuts from AFS. I installed new rotors, pads, stainless brake lines, and tires this weekend and my dumbass managed to strip a stud and break it off. I am gonna order a couple new studs from Ford Monday morning and was going to...

I have been running Kumho MX 275/40ZR17 for the last two years and they are now completely done. I probably got 15k-20k miles out of them. I loved the stickiness of them but now that I need more I can't seem to find any in stock. The NT-05 appears to be a comparable tire for the price...

Heli Coil R5326-14L Spark Plug Sav-A-Thread Insert M14 Long HELR5326-14L I found the 2nd from the rear on the passenger side had one of these on the spark plug when I removed it and the electrode was burnt off. The rest of the plugs have been factory original with 56K miles on them and they...

What if I don't want a Hybrid or some other yuppie driven pos? Car enthusiasts everywhere should be cringing. I hope this is gonna make the Obama lovers here happy. Obama pushing stronger fuel-efficiency standard - Yahoo! News

Does anyone know what length bolts I need to get so that I can bolt on a TA girdle on top of the full size DMR bracket? I am gonna try to round up some stainless steel hardware so that it does not rust.

I have been playing Rainbow Six Vegas 1&2, COD4, Brothers in Arms Hell's Highway, Ace Combat, and GTA San Andreas for PS3 and PS2 respectively. My laptop died again with another hard drive failure so I decided it was time to replace it. The last PC games I played were Medal of Honor Allied...

He was found guilty on all counts. At least they convicted him this time. Ironic that it was 13 years to the date since he was acquitted of murder. OJ found Guilty CNN Link

WTB TRAILER HITCH ASAP The previous owner of my truck removed the trailer hitch and now I may be looking to buy a used bass boat to pull around behind it. The wiring harness was pulled out of the hitch and zip-tied to the bottom of the truck, so I think that will be fine. The bolts for the...

My brother got a ticket on his way home from college Friday evening for 70 in a 55. This is his first ticket but he is only 20. I have heard they closed the loop-hole in NC law that allowed speeding tickets to be dropped to improper equipment. Is there anyway a lawyer can get him out of this...

LONDON - A lucky gambler has made 1 million pounds, or about $1.97 million, from a 50 pence ($1) bet, British bookmaker William Hill said Saturday. The man, who William Hill has not identified, correctly guessed the outcome of eight horse races Friday, beating odds of two-million-to-one...

Picked up an 02 L and I dont know a lot about them. I have a few pics with some questions. I know it has a Kenne Belle throttle body, air raid intake, electric fans, Bilstein shocks, and fuel, air/fuel, boost gauges. It peaks between 12-13lbs on the autometer gauge...

I thought it was ridiculous that the gubment was trying to bump minimum wage almost $2 an hour but check out this. It was on the local news tonight. There is also a link to a vid of the story. They want to bump minimum wage to $9.36 an hour. Link to news story

I was originally wanting to go to an eaton differential when I regeared but now I am hearing good things about Torsen. Anyone got any experiences to share? I know you can beef up the trac-loc but it will still have clutches to wear, that is why I thought the Torsen sounded like it would do...

The battery is dead on my Cobra so I need a new battery. Optima only makes 2 or 3 sizes of batteries, does anyone know what size I need? Do they fit alright, or will it need slight modifications?

My cousin was in a wreck in her Mustang at the end of May. She is just now getting to where she can start walking again. These pics are some of the worst wreck pics I have ever seen where someone was not killed. She fell asleep and hit a tractor trailer head on on her way home from work 3rd...

I just finished installing Bilstein HD's along with four bolt MM Caster/Camber Plates to compliment my H&R SS, now I am in need of a good four wheel alignment. What are the specs most people are running for a hard driven weekend street car? I'm also running 17x9 03's with 275/40/17 Kuhmo Ecsta...