http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130127681234
1994 Ford Mustang Cobra
Black Exterior with Tan Leather Interior
115,700 Miles
Clean Title
Runs Great, No Check Engine Lights
Ice Cold A/C
Overall 9.0 out of 10
Shows a little wear, but it’s better than most...
I have been searching here at work for about an hour (tough job) and I can't seem to find an answer... I am hoping this will be easy for someone to tell me.
I have the 94 cobra in the sig: intake, tb, shorties, h-pipe, dumped flowmasters, pulleys, etc.
I was wondering what I should set my...
I picked up a set of these cams after I read the story in MM&FF where they picked up 44 hp at the flywheel just with the cams. I have since decided to not tear into my motor and put a blower on it! So, the cams are up for sale! Paypal accepted $830 shipped to your door. Add 20 bucks if you want...
I am putting my car on the market. The cobra has the mods listed in my sig with a brand new SVT Motor with a full 36k mile warranty from ford until it reaches 108k! Brand new clutch, rear end and suspension. All work done by Ford or ford authorized techs with receipts!
The car has 74k miles...
Am I beating a dead horse with my thoughts on my engine choices or what?!
I got to thinking a while ago, what do you guys think of leaving my stock cobra cam and 1.7 rockers in, and getting a set of AFR 165cc heads and a trickflow street heat intake?
With the stock cam I would still get good...
I picked up a set of these cams after I read the story in MM&FF where they picked up 44 hp at the flywheel just with the cams. I have since decided to not tear into my motor and put a blower on it! So, the cams are up for sale! Paypal accepted $950 shipped to your door. Add 20 bucks if you want...
I am going to be doing a 306 rebuild this winter on my 94 Cobra, which is going to stay N/A, maybe a 100 shot down the road, but for now, N/A. I was considering two options for the heads.
1. Stock GT40's, port them, get stiffer springs, and use a Crane 2031 with the factory 1.7 rockers
2...
2006 Ford F-250 4x4 Lariat
6.0 liter Powerstroke Diesel V8
Crew Cab Short Bed Torqshift Automatic
Black with Tan Leather interior and Tow Command
28900 Miles
Modifications List
1. BDS 2” Front leveling kit with 4” F-350 Block kit for rear (5000 miles)
2. 35x12.50-18 BFG Mud Terrain T/A KM...
Hey guys, I need to change my hoses that run to/from my oil cooler on the '94 Cobra. There are 4 of them, maybe 3/4 of an inch i.d. Where would I find these hoses, Ford only? Also, if you happen to know the prat numbers on them that would be great!
Thanks,
Blake
This winter I will be rebuilding the 302 in the '94 Cobra. I wanted to get some input from you guys on my choices and specifics. Here are my plans as of now, tell me what you think, what you would add/change while keeping about the same budget.
Here are my CURRENT MODS to keep in mind...
So my brother and I took the Cobras to the track last night. I don't have the slips in front of me, but I remember the important numbers:-D
The '94 Cobra ran a 13.94 @ 99.4 mph (1.95 60 ft.)
The '97 Cobra ran a 13.80 @ 103 mph (2.1 60 ft.)
Neither car has a tune, which would help.
He...
I have a 9 psi Powerdyne supercharger kit for sale for 94-95 GT/Cobra 5.0 Mustangs. I just bought it, but I need to rebuild to a 306 instead, so I need to sell it.
It has recently been rebuilt, and comes with:
-A new belt
-Inline T-Rex fuel pump
-FMU calibrated for 24 lb...
Hey guys, I have a few questions about my new setup. But first I want to clear up some possible confusion. This is my brother’s account and we both use it. He has the ‘97 Cobra in the profile. I have a ‘94 Cobra. The questions I have pertain to the ’94 5.0 Cobra.
I recently bought a Powerdyne...
I have a set of 2001 Polished Cobra that are perfect with brand new tires for sale. I am going to go with 03s this time around! The tires are 275/40-17 Matrax for the rear and matching 255/45-17 Matrax on the nose. These tires literally have less than 1000 miles on them and still look brand new...
Hey guys, I need some ideas on my '94 Cobra. It has 110k miles on it, UPR Intake, BBK 70mm TB, BBK Alum. U/D Pulley Kit, MSD Blaster Coil, BBK Shorty Headers, BBK o/r H-Pipe, dumped Flowmaster 40's, Steeda Springs, Tokico Shocks/Struts, Caster/Camber Plates, FMS Alum. D/S, and FMS Clutch.
It...
Hey guys, I need some ideas on my '94 Cobra. It has 110k miles on it, UPR Intake, BBK 70mm TB, BBK Alum. U/D Pulley Kit, MSD Blaster Coil, BBK Shorty Headers, BBK o/r H-Pipe, dumped Flowmaster 40's, Steeda Springs, Tokico Shocks/Struts, Caster/Camber Plates, FMS Alum. D/S, and FMS Clutch.
It...
I have a 2001 XL 800 3-Seater waverunner with approx. 70 hours on it for sale. This boat is quick, fun, and extremely reliable. I will include the ski rope in the sale. The boat does come with a 2002 Yacht Club trailer. Both boat and trailer are perfect. I will sell them for $4750 firm. Average...