I have an 03-04 Cobra Procharger F1A cog drive kit pullied for 30 psi. This blower can support up to 1100hp and 38 psi.
Set up for speed density and big power but if you want to run less boost and a MAF the pulley can be changed and you can get the appropriate intake pipe from Procharger...
I am putting a TKO600 and McLeod twin disc on my '03 Cobra motor and when I checked the register bore runout on the bellhousing it came in at 0.015". Spec from Tremec is 0.005" max and from what I understand all the folks complaining about crappy shifting didn't index the bellhousing or set the...
I've been looking at injectors to upgrade my fuel system in anticipation of more power. Is there any reason that Siemen Deka and FRPP 80 lb/hr high impedance injectors are $400 and most of the other brands (RC, Lethal, etc) cost $700+? Any reason not to go with the Siemen Deka or FRPP ones on my...
Anyone running this kit? I did a search but didn't see any #'s for the P1SC, just the F1A.
Someone is wanting to trade me a Fox body and a Procharger P-1SC-2 kit for '03/'04 Cobra for my '94. Right now I just have an unported Eaton and upper pulley and it made 465/473 before exhaust mods. The...
Just installed an Accufab TB and inlet and for some reason I can't get the key on engine off TPS voltage to read higher than .93V.
It's as far clockwise as the play in the holes will allow but that's all she'll give me. The slot inside the TPS doesn't appear to be worn and if you take it loose...
Anyone ever had one of these go bad and had to change it out? My '94 Cobra blows the #1 fuse and I have had everything else on this circuit unplugged and it still blows immediately as soon as I turn the key to on.
I'm hoping it's the switch because otherwise I would assume it's a short in the...
Got to run a grey G35 coupe from a light last night in my '94. I could tell he wanted some because his girl in the passenger seat was looking over at me and I could see his car rolling a little because he was off the brake and revving it a little.
I eased into it to keep from spinning the...