Search results

I'm doing a double DIN install in my 99 mustang using an 01-04 bezel. Can anyone supply me with instructions for how I need to rewire the traction control switch? My 99 switch harness is one wire short of the 6 wires in the 01-04 switch. 2 of the wires appear to be the same color and match a...

I posted a thread about a Pep Boys' oil deal and a Pennzoil deal and they are gone. What's the deal? @SID297

Does anyone have a datalog file for the nGauge they can share with me?

Title pretty much says it all but... I have an old transformer powered 175W mercury vapor lamp that has died and most of the replacements I find are LED. Can anyone recommend a replacement that will throw as much light over the same area as my old lamp? Links are appreciated.

Eibach part # 3590.312, 29mm. New or used is fine.

I'm about the start a new job that will have me traveling quite a bit. I'll mainly fly on Delta and United and have accounts with them. I also have an account with Hertz for auto and Hilton for hotels. I've been looking at Chase Sapphire and Reserve. I'm looking to maximize my points for free...

I currently have a lower 99 Cobra with stock front and rear swaybars (IRS) and 275/40/17s on all 4 corners. I parted out a car recently and have a 35mm Eibach swaybar. What will happen if I put the front bar only on my car? Will it cause it to understeer? It seems to corner pretty neutrally...

What effect do displacement and supercharging have on runner length? I currently have a Nazman Psr on my 4.6 and I'm going with a 323 bb/stroker. I'm considering to swap a FR500 intake in place of the psr but I didn't know if it would have the same high rpm only benefit or if the increase in...

I have a Fore hat with GT Supercar pumps. I'm planning on switching to a return style system. Can I get some recommendations on E85 compatible pumps that will fit my hat?

I understand this is usually a dealer only item, but I'm hoping to find someone to sell me their seat sealant. You can PM me and I'll keep my mouth shut. :)

How much less (%/miles/etc) life are people getting out of the RR 8 rib pullies vs the standard Vortech pulley?

Would anyone like to guess why my power is dropping off abruptly? Spark, fuel and boost are where they should be. My tuner suggested possibly needing valve springs. I have a stock bottom end, stock heads/cams, psr, longtubes and vortech ti trim sc. The lower hp graph is with a 3.6 pulley. The...

I've shredded the front and rear rib on my 8 rib belt and need one asap.

I have a standard Vortech V2 TI, that is rated for 52,000 rpm. How much an I safely overspin it? I talked to a tech at Vortech and he said I'd need a different gear case and bearings to go 55,000 rpms that the HD is rated for.

Vehicle--99 Cobra w/ 3 bolt tensioner timing cover and T trim blower. Can anyone help with my Vortech 8 rib conversion? I have everything mocked up and it all looks good except for the Vortech supplied idler that goes between the sc bracket and the alternator on a stud. It sits too far back. I...

I've seen a ton of good feedback about using a wastegate on the 5.0bro motors and I'd expect to see some gains on the 96-01 cobras but not as dramatic as the higher powered coyotes. I have a stock HC/PSR 99 Cobra that is seeing about 12 psi w/ a Ti Trim using a 3.60" pulley. I'd like to pulley...

I've seen a ton of good feedback about using a wastegate on the 5.0bro motors and I'd expect to see some gains on the 96-01 cobras but not as dramatic as the higher powered coyotes. I have a stock HC/PSR 99 Cobra that is seeing about 12 psi w/ a Ti Trim using a 3.60" pulley. I'd like to pulley...

I got a ton of M1 and Pennzoil Ultra for $2 a quart at my local AZ. Happy Hunting!

I had a tune issue and Decipha was able to help me. Great guy to deal with!

I have installed a head cooling mod that is modeled after the evenflow style using the plug at the rear of the intake manifold (DS, pointing up). I'm getting interference btw the fittings for the cooling mod and the fuel line. I have the the fuel rail bolted down but it is right on top of the...

I'm looking into battery powered WIFI transmitting cameras. Currently, Arlo Pro is the front runner. Does anyone have any other recommendations...

I have a 99 Cobra with a T trim that is going to get a forged rebuild along with blower cams and cnc ported heads. Is there a limit on how much horsepower I can make on 93 octane or is the limit related to how much boost I am using to make hp?

I'm picking up a swap from a guy this weekend and wanted to make sure I get all the goodies. Here's one pic he sent me. Can you tell me what else I will need? Not pictured but included is the intercooler pump/brackets/lines,hydroboost lines, also a maf. I currently have a tuner and cobra...

I have silverstars in my foglights but would like something brighter. What are my options? Projectors, HID's that won't melt my housing or something else completely.

I'm needing one. Let me know if you have one.