Search results

I'm not in tune at all with the Fox market, so i thought i would post this here and maybe get a bit of help, all i have owned in the last 7 years are Terminators. Anyway, I have an opportunity to pick up an '87 LX 5.0 from the original owner. It was bought from a local dealer here back in...

Let me preface this by saying I think I may have street-raced like twice in the last 15 years, so I'm not very informed on alot of real-world performance numbers on cars. But I was at my neighbors' house at a BBQ last weekend and the guy's nephew saw my car peeking out of my garage. The kid...

Motor Trend tested the 2003 Cobra vert 0-60 in 4.9 sec. And tested the new Mustang GT coupe 0-60 in 4.9 sec. 2010 Shelby GT500 0-60 in 4.5. The Cobra vert weighed in at 3780 lbs. The 2010 GT Coupe at 3572. 1/4 times were 13.1 for the '03 Cobra and 13.5 for the '10 GT. The GT is only...

Wife gave the green light to go to the Dark Side, so we will be shopping for a GT500 soon. :burn: Thought I would put my 1 of 128 OW vert, #1261, up to see if there may be any interest in it. I bought it as a bone-stock car from the original owner, always a SW car, garage queen and NOT a...

Took the Cobra to the top of the world (Pics) Here are some shots of our little roadie thru Colorado from Abq up to Steamboat Springs for the Rocky Mountain Mustang Roundup. Took the terminator up to 12,000 feet a couple times, including Independence Pass. Had a great weekend as usual, and...

RMMR 2009 starts thursday 6/18 in Steamboat, Colorado. Looks like there will be close to 600 cars this year. We will be driving the Terminator up from Abq on thursday to kick off the weekend with the poker run. Hope to see some CO/NM/AZ SVTP'ers up in Steamboat this year! Rocky...

RMMR 2009 starts thursday 6/18 in Steamboat, Colorado. Looks like there will be close to 600 cars this year. We will be driving the Terminator up from Abq on thursday to kick off the weekend with the poker run. Hope to see some CO/NM SVTP'ers up in Steamboat this year! Rocky Mountain...

If anyone has either a Colgan or a Ford front bra, I think they are a 2-piece, let me know, I could use one for a roadie coming up. Will need one in good shape, and pics of it please. I have a front plate, so if you have one with the front plate opening, even better. These are $150 new...

Tried the search, no luck. I have the JLT RAI and not only am I concerned about clearance issues over the pipe on the RAI, but overall looks in the engine bay. Some guys swear by these, some don't. I'm looking at the MM and Steeda ones. It looks like the MM for the '03/'04 Cobras have a...

If anyone has a 14" shorty antenna,black, laying around and wants to get rid of it let me know. They are $25 at American Muscle but I thought I would check here first. Thanks.

Steggy ported TB and Plenum, off of a 2003 Cobra. I ran this on my car for about 1000 miles, and I will be inhereting a single-blade from a friend so this is for sale. Its in great shape, and I mounted a brand new TPS from the dealer on it, thats a $60 part! If you want to pick up an extra...

Steggy ported TB and Plenum, off of a 2003 Cobra. I ran this on my car for about 1000 miles, and I will be inhereting a single-blade from a friend so this is for sale. Its in great shape, and I mounted a brand new TPS from the dealer on it, thats a $60 part! If you want to pick up an extra...

My car has the original Motorcraft battery it was sold with, so it turned 5 years in Feb. I've got a 1,000 mile roundtrip roadie up to Steamboat, Colorado next month for a car show. The car still starts well and the sight light is still nice and green. So should I just let it roll the way...

So dumb-ass here was doing his swap of his TB/plenum for a ported unit, and I was going to re-use the TPS but I managed to strip out one of the screws trying to remove it. Couldn't even budge it with an easy-out or a left-handed drill bit.:bash: So I am going to have to get a new TPS sensor...

I have a typical pullied car, 2.76 upper, no lower, non-ported blower, intake/exhaust and dyno tuned with SCT. I am putting on a Steggy-ported stocker TB/Plenum to grab a couple extra HP. I won't have to re-tune my car, will I??

Getting ready to do a brake job next month. Going to remove rotors, take them to a brake lathe if needed, then re-install. Will probably be using the Hawk pads from Lethal. Any surprises or advise before this job starts? It will be my first experience with doing a brake R&R on this car. Thanks.

Just got this finished, its the High Performance Charcoal by Solargard film, and its so nice. Has a little metallic to it to give off a slight reflection to it. This is the 6%. Car is a little dirty:D, and the tint needs a couple more days to cure. I like it with the OW:rockon:

Silver JLT pre-filter for sale, I bought this for my '04, screwed it into the grommet, didn't like the way it looked and removed it. It has 0 miles on it. JLT gets $47 + shipping for this, I will take $35 shipped. Thanks.

Silver JLT pre-filter for sale. I bought this for my '04, screwed it into the grommet and didn't like the way it looked so I removed it. It has 0 miles on it. JLT gets $47 + shipping on this, I will take $35 shipped. Thanks.

With the search feature still gone, I need someone with the link or someone who knows the ingredients that go to making an oil seperator. I'm heading to Lowes wednesday night and I wanna pick everything up to make one, including the correct bracket to do a firewall mount. Thanks.:beer:

Uncle Sam paid me back a little bit of $$ after treating me like a farm animal all year, so I am ready to pick up the necessary CDC light bar for my vert. So do i just get it from CDC direct or does someone have some inside info on who may sell it cheaper? I know they come in different...

Looking for a single-blade BF TB. If you have the matching BF plenum, even better. Only looking at polished Chrome or Black. Either no etching or the TERMINATOR etching, please. Must be complete, no missing parts, and in excellent condition. Please post detailed pics here or PM, or email...

Found this on a local Craigslist, don't know if its legit, but maybe worth a shot. Looks like a great price, gotta hate the divorce sale! ***2008 SHELBY GT500*** MUST SELL!!!

So one of my first cars I had in high school was a 1968 Mercury Cougar XR-7, and the coolest thing on that car were the sequentials. Gimme some opinions on the sequentials on Terminators please. Cool or waste of money? Also, which way did you guys go....splice in or plug and play? Pretty...

Up for sale is my old JLT CAI in Oxford White. My tuner and I decided to go with a JLTR RAI, so now this is up for sale. The tube has damage(scratches) from removing it out of the fenderwell, but after you re-install it, it all should be invisible. The filter cone is also dented a bit from...