SOLD.
BBK short mid pipe with high flow catalytic converters. Fits 1996-2004 Cobras with long tube BBK headers. (I am not sure if it will fit other brand long tube headers or not.)
Brand new these are $400. Had on my Cobra off and on for less than 15K miles.
Prefer local...
SOLD.
2001 Ford Mustang Cobra
Oxford White
Miles - 55,000 miles (estimated) Gauge cluster was changed to a 2003 cluster a few years back miles were never corrected.
Purchased this car back in 2006. Was in an accident earlier this year. All damages were repaired by a collision...
2011 Ford Taurus SHO
Livernois Stage 4 91 Octane Tune
R/T - .594
60' - 1.977
330 - 5.588
1/8 - 8.601
MPH - 81.70
I could have sworn that the car felt a little slower tonight than it usually does around town. My only guess is that maybe the car cooled down too much? Staging took...
I understand this is a 12 year old car but does anyone else have lots of rattles or noises from their interior pieces? The plastics around my shifter and head unit make a lot of noise when going over bumps or anything turbulent on the road. If I push down on the plastics they give in and bend a...
SOLD.
This came with my car when I bought it years ago. I don't think I've ever used it and I don't need it.
Didnt want to just throw it in the trash so I'm checking to see if anybody else wants it.
Just asking $20 so I can package and send it UPS. :beer:
I bought these tire chains two winters ago and they work great. I'm selling these because I got a new car and these don't fit.
Chains were purchased from tirechain.com. They are the nicest ones they sell which are their "Diamond Tire Chain." (Around $76 after checkout for brand new ones)...
So I sold some stock Cobra seats on this forum a week or so ago. Most guys don't offer shipping options when selling seats but since I deal with the shipping and receiving at the store I work at I felt like I had the resources to make it possible.
After selling the seats I packaged them in...
SOLD
Selling my stock seats out of my '01 Cobra. Seats have around 48K miles on them and come with the stock seat tracks (but without seat belt receivers). The passenger seat is like new; the driver's side has some wear on the fabric part (see pictures).
I'm located in...
I fried my Aeroforce gauge so I'm trying to make up for a $250 loss here.
3.5 bar (50 psia) MAP sensor with connector/pigtail
SOLD
Aeroforce Custom Face w/ brushed aluminum bezel-
SOLD
PM me.
Tomorrow I'm going to install my MAP sensor to my Aeroforce Interceptor gauge so I can finally read boost from my Eaton swap.
The sensor needs a 12V power supply to run off of. Where would be a good place to wire this up?
Anybody going?
I've been the last three weeks (watching, not racing- broken 3rd gear syncro) and every week there's the same two 03/04 Cobras there. For what its worth they are running REALLY slow trapping around 80MPH in the 1/8. Want to see someone else!
Anybody else going to make it down??
SOLD.
Cleaning out my garage today I found my old RAI that was on my car before my blower was installed.
There's no filter included so all I'm asking is $20 to UPS ground ship it.
I believe you can get a JLT filter by itself for around $45 on their website.
PM me...
When I'm driving (in any gear) without pushing the clutch down my clutch pedal vibrates like crazy. This only happens when the RPMs are below 3,000 RPM.
Anybody know the cause of this?
I installed my new 2003 gauge cluster last night. The car wouldn't start after the install but I expected that since PATS is still on.
I downloaded a new tune from my tuner with PATS turned off so now the car starts and runs, but for some reason my theft light keeps blinking. How do I turn...
Went with an Eaton swap so I have this intake left over for a 99/01 Cobra. Its been on my car for less than 3000 miles.
I don't have the filter as its on my new intake.
Perhaps JLT sells the filter itself separately?
Make me an offer. :beer:
I dropped my car off at the shop and I'm getting the Eaton Swap done thanks to a fellow 2003 owner going Turbo.
My tuner says that I should be safe with a boost-a-pump for now but I would like to get an 03 Cobra pump while its being done at the shop.
Would the boost-a-pump alone be...
Every since my '00R Spec T56 swap (with Centerforce Dual Friction Clutch) I get a vibration on my take offs from a stop. Its the kind of feeling one would get when you wouldn't give the car enough gas while slipping the clutch or as if you took off in 2nd gear without reving it up enough.
Its...
SOLD
I have a brand new never installed 03/04 Tremec T-56 26 Spline Input Shaft for sale.
The kit came with bearings and seals which have already been installed. I was about to install this on my own transmission but I found out my T-56 was a Borg and Warner and not a...
SOLD
I have a brand new (in the wrapper still) SPEC Stage 2 Clutch kit for sale. (26 Spline, model SF872T)
This clucth will fit 1999-2004 Cobras, 2003/2004 Mach 1s, and 2001-2004 GTs.
Your car must have a 26 spline input shaft in order for this clutch to fit your...
My car is getting finished up today with a T-56 swap.
Since I've dropped the car off at the shop I've gotten some weird information and feedback from the installers.
For one, I bought a 26 spline input shaft for it and it doesn't fit in the transmission. So I had to stick with the stock 10...
I just purchased a T-56 and I would like to get some opinions on what you guys recommend as far as which clutch and input shaft to use with it.
I have longtube headers so I want this clutch to last. My car only sees the track maybe once a year and it is not a DD. Seeing as how its only a...
Looking for a T-56 for my '01 Cobra. ( I will also need an 03 driveshaft and crossmember) Was ready to buy one on D&D but I just find them way over priced.
Would prefer a local transaction to avoid shipping. My zip code is 92821.
:beer: