Search results

  1. S

    Auto to manual harness questions

    I'm swapping in an auto into the mutt, and part of the deal is I'm re-wiring both harnesses. I read the write up on MF, but I can't figure out the wiring for the auto to t56 side of the deal.
  2. S

    Baumminator or mach 1 computer?

    I've got a chance to go with either, and the prices are about the same. Whic is going to be a better deal? I lose an AIT sensor by going with the mach computer, but I don't know a whole lot about the stand alone set up's. So, simply put, which is a better option, in your opinion SVTP?
  3. S

    WTB Mach 1 auto computer

    Anyone have one laying around?
  4. S

    Spec 4.6 8 bolt aluminum flywheel

    Light one that they make, 11lbs I think. Has a brand new $100 insert that comes with it. $200 From the spec website: Application Flywheels Year Span Engine Includes Steel Aluminum None 1999 2004 4.6L Cobra, MACH SF84S SF84A Pricing...
  5. S

    Swapping in a 5r55

    I've found a local 5r55 in great condition locally and I'm thinking of trying a swap into my car. Anyone ever even tried this? It looks like a complete rebuild kit, input and output shafts are only around $1000. I've done several searches and I can't find anyone who's swapped one into an...
  6. S

    WTT for 4wd diesel qc truck

    Quick rundown on the mutt: 00 GT with a complete 04 Cobra swap 607hp/545ft-lb at the wheels Drive train: 04 Cobra motor 20k KB 2.4 60 lb/hr injectors LFP SBTB jlt rai aeromotive fuel system Magnaflow catback Bassanni uncatted x-pipe Trans: T56 w/spec 3 MGW orange handle hurst...
  7. S

    wtt 15x8 Greg welds

    Need pro stars or any other wheel that will fit with my mach 1 brakes. Wheels are in like new condition, no nicks, curbing, bends, etc
  8. S

    Got a trade offer on my car, 87 GN....opinions?

    Yesterday a guy sent me a PM asking if I was interested in a trade for his 87 grand National (one of my all time favorite cars BTW). 4.1 block, 77mm turbo, complete fuel system, built 9" rear, built 400 trans with trans brake, wilwood discs all around. Runs mid 10's on pump gas. Quick rundown...
  9. S

    Wtt t56 for 4r70/75

    My complete t56 with 25-30k, mgw orange handle, spec3 w/spec aluminum fly wheel. Want a complete 4r70w or 4r75w with at least an aftermarket valvebody and/or torque converter. I'd be willing to drive to do the swap, or I have the facilities here to do it. My email is [email protected] or...
  10. S

    New edge/Cobra springs & suspension parts

    Front "C" springs Stock Mach 1 rear springs 3/4 coil cut Stock upper control arms Stock GT front control arms 03/04 Cobra: Front 03 cobra coupe springs 1 coil cut Rear 03 cobra h&r race (black) springs stock caster camber plates, gt and 03 cobra make an offer
  11. S

    Hit the magic number tonight

    600hp and 536ft-lb I'm over 500ft-lb from 2800 to 6200. This was after 10+ pulls sorting the AF out, very little cool down time and terrible 90+% humidity here today. In the morning I'm gonna pull the LFP SBTB and try to fix the sticking blade and we'll make a few more pulls while it's cool...
  12. S

    Whats gonna break first?

    I recently upgraded the mutt with a Mach1 SRA and KB 2.4, 60# injectors, BA3000 along with the snow meth kit which I've had. The car has a spec 3, and I'm guessing stock input (clutch was in when I bought the car). The 8.8 still has the stock 28 spline shafts, BUT it's been welded and braced...
  13. S

    94-04 passenger side muffler hanger

    This is the only part I need to finish my SRA swap. It's a V8 car only part, it bolts to the body near the control arm with 2 10mm bolts. I can get it from Ford, but it's a 3-4 day wait and $25.
  14. S

    WTB SRA swap parts

    I need the following: All 4 exhaust hangers Both ABS sensors
  15. S

    SRA guys, question for ya

    I'm ditching the IRS and going to a Mach 1 SRA. Anyone know if you can run a 15" wheel with the mach/cobra sized rear brakes?
  16. S

    03 GT SRA stock, cleaned and painted

    sold
  17. S

    KB pulley wrench

    Anyone selling one? Or renting one? I need one ASAP!! I'm assuming you can't use the Eaton pulley puller, correct?
  18. S

    2g iPhone

    My wife just upgraded to the 3GS so we no longer need this one. It's got a slight dent in the aluminum on the right top corner and some scuffing from being in the case. All the pixels work, it's not jailbroken or unlocked but I can jail break it. I'll have to check what firmware it has. $200
  19. S

    03/04 Cobra MAF, 39# inj, MAFia

    Stock MAF $50 Stock injectors SOLD MAFia SOLD I supported over 500hp with out maxing any of them out. The injectors were only at 85% duty cycle
  20. S

    What aux. idler w/bracket for 2.4 KB

    I tried the search and found nothing. I know the BF won't work, and I heard rumors the motoblue would work. I just wanted to be sure before I started looking for another idler and bracket.
  21. S

    03/04 cobra MAF, 39# injectors, MAFia

    Stock MAF $50 Stock injectors SOLD MAFia SOLD
  22. S

    True forged/posi ported eaton, TB and plenum + more

    I'm moving up to a twin screw so the eaton has to go. I have a true forged ported eaton, posi ported TB and plenum, stock rails w/39lb injectors, stock rails have an AN fitting welded in for the fuel return line. I also have a 2.76 black quick change billetflow upper. Eaton has about 18k on it...
  23. S

    TF/Posi ported eaton, TB and plenum

    I'm moving up to a twin screw so the eaton has to go. I have a true forged ported eaton, posi ported TB and plenum, stock rails w/39lb injectors, stock rails have an AN fitting welded in for the fuel return line. I also have a 2.76 black quick change billetflow upper. Eaton has about 18k on it...
  24. S

    lost boost/vacuum

    I noticed on the way home the other night I dropped from 14/15#'s down to 11, and I'm only pulling 15#'s of vacuum. I checked and can't find any leaks, no belt slipping, and I marked the pulley to confirm it's not spinning on the snout. The boost bypass is pre loaded, and looks to be working...
  25. S

    Neutral safety switch ??'s

    I clearly have no neutral safety switch wired up on my car. Does anyone have a diagram or a good underdash pic of the switch?

Top