NIB stage 2 NA cams for 11-14 coyote. Comp cams Part# NSR-NA2H-126. Cams are designed to work with stock springs. Also comes with phase limiter, phaser bolts and cam tower bolts (might miss some bolts) Have this sitting in box for a few years now and ended up selling the car. Everything is brand...
New in box never installed custom compcams left and right intake cams only. Specs are .495 lift and duration @ .050 is 224. I Also have the cam card. Asking 550$ shipped.
READ CAREFULLY. I have a set of new Compcams 4V exhaust camshaft .Duration @.050 is 216 and lift is .495. Everything is brand new never install. Nothing wrong. Looking to trade for exhaust cams with duration @ .050 in the 218-222 range to better suit my combo.
I ONLY WANT TO TRADE THE EXHAUST...
NEW Diamond pistons plasma moly top ring, std bore, 1.5mm top, 1.5mm second, 3mm oil ring. Will fit most brand pistons as long as your piston have the same ring thickness. part# 09063552
125$ shipped
I bought the gt500 blower as a new take off blower from a supersnake conversion to do a cobra engineering M122 swap on my cobra many years ago. I did use the cobra M112 snout so i never used the GT500 snout. Comes with the stock pulley. It does have a few scratch from sitting in a box over the...
Picked up a hp performance twin kit with the longtube design. I know that it's built around QA1 but i just ditched my QA1 k-member last summer for an AJE because of tons of alignment issues.
Just wondering if anyone got the hp longtubes to work with other k-member than QA1. I don't mind...
Used compcams beehive valve spring with matching comp cams retainers and seals (32). Have about 6000 miles and was used on 03 cobra with 2.8 kennebell and stock cams to control valve float. Nothing wrong with it . Switching to turbo with GT500 heads.
275$ shipped
2001 cobra cams that i've been running on a few different set up since 2007 . Cams were degree to 114/114 by filing the keyway. I've tacked welded the gears to the cams and welded the keyway as well for added safety. I've put over 300 pass on these and over 20000 miles without a single problem...
looking for a 6 bolt supercharger pulley hub for a TVS supercharger. Mostly need the Hub but would consider an 90mm pulley and hub combo. pm me what you got. Thanks!
Sold
-
Set of shortie headers out of a aussie XR8 falcon with 5.4 dohc. Mild steel, 1 3/4" primary tubes , 2.5" collector. They use navigator/ C head port. They make some nice turbo headers when flipped forward.
Asking 350$ shipped to lower 48 state and canada
I have a new turbosmart 50mm progate. It was installed for mock up only. It comes in the original box with everything ( flanges, v-band clamp, fittings ) . I'm redoing the turbo system and going with twins and will need 2 smaller wastegate
asking 325$ shipped
Fuel rails that came on a 2008 bullitt prototype intake that i bought. Pretty sure they are the same as GT500 fuel rails. The FRPS shown on the second picture is not included.
asking 120$ shipped