Hello all,
Just picked up my Stang on Saturday and I am upgrading the wheels on it. Have this set in perfect condition with about 800 miles on them. 20x9 with 265/35/20 Pzeros all the way around. Asking $1100 complete with sensors. Please PM, email to [email protected] or text/message to...
Well with the damn cold weather, the z06 stays park for the most part. So have to pass time doing some other fun stuff. The wifey bought me a tv for the garage for Christmas. After the tv was hung, I wanted more. We did the paint work this weekend and just completed the floor today. Pretty happy...
Took the Z out last night for a little fun. Ran into a Shelby with a Kenne Bell/mammoth set up making 712rwhp. With the cooler nights and roads traction definately was an issue for both us. He hung till about 75 when the traction caught and then I put a few train lengths on him before letting...
Hello,
I previously had some OZ Ultralegga wheels in 19/20 on my Z. But traction was pretty non existent. I just put these wheels on today with some meaty 345/30/19 Nitto NT05r drag radials. I am liking the look and the traction is much better.
Thanks
Hello all,
I have a set of stock injectors out of my old GT500. This set were replaced with a Whipple install. They have about 1000 miles on them is all. Looking for $125. Please PM or email at [email protected]
Thanks
Hello,
Summer is just about there and I have a brand new in the box Reische 170 degree thermostat specifically for the 5.4 GT500. I purchased it and had it in my tool box. However I sold my Shelby and just realized I had it. $40 bucks shipped. PM or email me at [email protected]
Thanks,
Mike
Hello all,
I am looking to sell my Shelby. She is an 08 Black with gray stripes. Black leather interior, tinted windows, Cervinis lower and upper side scoops, chrome 20" Ruff Racing wheels with rear 315/35/20 Nitto NT05r drag radials.
Mods:
3.4 Whipple polished
Whipple Monoblade TB
C & L...
Hey guys,
I have a strange, strange problem. A month or so, I was out playing hard and completely lost control of my Shelby from a second gear roll. I hit the top of 2nd and heard a loud bang. The next thing I know, I was veering left out of control. Luckily I finally got control of her. I...
Hello,
I finally got my Shelby on the dyno today after a series of mods. We put on a 3.4 Whipple with the stock pulley, Monoblade TB, Afco heat exchanger, JBA long tubes, off road x pipe, 3.73 gears and a Shelby shifter. I got my tune from Jon Lund and the A/F was right on. I actually never...
Hello,
I am replacing my BBK 65mm TB with a Monoblade (Whiple 3.4 package). This performed for me flawlessly with no adjusment in the tune. $175 shipped. Please PM or email at [email protected]
Thanks
NOW SOLD!
Hello all,
I purchased a Whipple 3.4 and will have my complete stock blower for sale. It includes the inlet and a 2.6" upper pulley. Blower has less then 900 miles. Asking $500 obo. You can PM or email me at [email protected]
Thanks,
Mike
I have a full set of GT500 wheels & tires mounted with the sensors. I replaced them with less then 50 miles when I picked up my new GT500. If interested please PM or email at [email protected]
$650+shipping.
Thanks
Hello,
I have a brand new set of Ford GT supercar fuel pumps for sale. I was going to install these in my turbo setup, but am going for a different route. $150 shipped for the pair.
Thanks,
Mike
Hello,
Can you get the new Nitto 20" drag radial? 305/35/20 is the size. Nitto now has it listed on there site. Looking for a pair, price shipped to 87002.
Thanks
I replaced my mufflers and have this set available. Very low miles, maybe 1500 tops on them. $55 bucks shipped for the pair. Paypal accepted. Please email me at [email protected] if interested. Here are the specs:
Product ID: MAG14416
Category: Magnaflow-4" Round Polished Stainless Steel...
Hello all,
Got a question about PMI. When I purchased my first home 7 years ago, I got stuck paying PMI as part of my payment every month. I was under the impression that the PMI would drop off when I owed less then 80% of what the home is worth. The home had 7k equity when I bought it and...
Hello,
Been reading alot about the polishing system. I just purchased a porter cable and love the results. I used a polished/swirl remover, then some Nattys blue paste wax and now want to top it off with a glaze. Are there any good glazes that Autozone or Checkers carries? What speed should I...
I have a Innovators West Overdriven dampener/8 rib crank pulley for sale. It is the 10% overdriven or 7.5". $350 shipped. Please email me at [email protected] if interested.
Thanks
Hello all,
I have an 01 Cobra that I am thinking about changing my combo. I will have a complete package available in a few weeks. Here is what I am looking to sell:
Novi2000 Setup
*Head Unit
*Brackets & Belt
*Powerpipe
*SCT 2400 MAF
*Complete 8 rib setup
Crower Stage II Blower Cams...
Hey Quad,
Are you running your BAP before the FDPM or after? Do you have the upgrading wiring kit? I added a LP wiring upgrade kit and it completely drained my battery. I have tried re-wiring everything and cannot get the pumps to cycle on with the relay. Every write up I found is for the...
I am looking for a clutch kit for my 01 Cobra. Looking for something comparable to a Spec Stage III. Please let me know if anything is available.
Thanks
I have 1 brand new never installed Aviator fuel pump assembly. This is supposed to be one of the top flowing fuel pumps for the returnless style fuel system. I had one in my blown 01 Cobra and it supported 450 to the wheels without any mods. I was going to put 2 of these in my new setup, but...
I have 2 brand new never installed Aviator fuel pump assemblies. I purchased these to install on my 01 Cobra, but after data logging the fuel pumps cycles, it looks like I don't need them. Brand new these go for $170 plus shipping each. I will take $250+ shipping for the pair or $150 each...
Hello,
I got an 01 Mineral Gray Cobra coupe with 25k original miles for sale: This is a seriously modded car with well over 20k invested in performance upgrades. This car dyno'ed 703 to the wheels corrected at the dynoedge in Albuquerque, NM yet drive's very smooth and comfortable. The list...