Search results

I just bought a 2017 GT A6 with a 2.3 rousch 80mm that ran high 11's in much better air but after I had it tuned it picked up over one full second 10.68@128 on my factory 20" rims and a drag radial so if you want to gain a lot of power contact Ken @ palm beech dyno and have it retuned

Well we went to Atco on Saturday and even with not the best track prep the - DA was in our favor so my 60' slowed from 1.45 to 1.50 but I ran a best of 10.48@129 on the 3.80 pulley. In the spring I will have bigger injectors and the billit oil pump gears and a smaller pulley to see some lower et's

I have a 2013 gt and I'm thinking of a upgrade this winter. New rods pistons oil pump gears and billit crank sprocket, my question is how much boost would my Paxton at 7500 rpms be safe on the engine?

Had my circle d 4c converter put in today and i was told it's 3800 stall but it seems to be much tighter than that.However it did seem to wake it up from a dead stop and take the boost lag away. Tommarrow I will give it a shot flashing it and pre loading it and see what I got. I will post my...

Went to Atco last Saturday with dragradial ,Evo tune,cold air and long tube headers no cats 3500 stall. Ran 11.85@115 1.64 60' but we thought it would have ran better with our mods.what are your thoughts!

My nephew is giving away this all but new car,all the dealer plastic still on the interior window sticker still on.not a mark in or out it' new.Mods are 10.0 cage,TVS2.3 blower,lowered,upper&lower control arms w/QA1's rear shocks,Evolution build and tune,stock and race star wheels and drag...

Check out this video on you tube (Henry cooper.MOV) it's my truck at Atco raceway yesterday.

had a great day at the track,a new best mph and the 11's what a day.

ran a new best on sat. with a broken LCA bushing that hurt my 60' 1.61-69 from my old best of 1.57's

my 2 nephews raced at atco on sat. 11.11@127 for the Z06 and GT500 10.86@127 w/1.58 these guy's have been B/Shittin back and forth since Jan. about who's going to win.with more seat time (Z06) the vette would get better,my guess 11.0 with a good 60' so GT500 all the way.by the way,Z06...

hows that 60' for a 3650lb car,all motor.I can't get over the way this car comes out.front wheels off the ground 4" it's sick.

this weekend I'll be in a 09GT500 that belongs to my cousin from Reading PA. I'll be racing 2 other 500's and a Z06 w/mods.hope I remember how to drive it.should run 10.80's if I can still handle it,at least a 11.00 maybe 12.0 who knows.Only time will tell,ET times lol

ran at atco non friday night 12.26@110 w/1.63 60' right off the trailer then the dew came and the track got slick ran 2 more passes 12.32's

ran a 12.38 @109.48 w/1.62 60' thats my best so far at Island.CJ rear springs and et streets what a hole shot.front wheels off the ground by a few inches..yahoo. now I need to work on my mph and weight.

went to N.E. dragway in N.H. on sat had a great day made 2 passes and had to leave to make it home before 6pm [email protected] w/1.69 60' was my best.

been running 12.40's and 50's@110-111mph w/1.68-1.75 60' and now I just got the comp cams so well see what I get out of it.

went to cecil on sat. with my 09 gt I ran a 12.47@110 with a 1.75 60' on a 29" nitto then sun. on a 26" MT et dr I had a 1.68 60" but my time dropped to a 12.51 @ 109 at island dragway but it's a slower track that sits up on a mountainand it was 84 degrees

last week a friend of mine sold me flapper delete plugs for my 09GT went to the track wed. to try them out and on the first pass out even with bad traction the car picked up and I could feel the diff. but on the next pass my posi stopped working in the burnout and I slowed to a 12.70 and then on...

started with 4.10's DR's,h-pipe no cats,JLTcai,EVO tune and steeda pulley went 12.74@108 w/178 60' then I added 4.56's pacesetter longtube headers and I went back to the track sun. I bested my 60' to a 1.72 but the air was crap and my best et was [email protected] I do believe the car is faster but I...

has anyone put longtubes on a gt mustang.I'm having trouble reaching the under side 2 inner bolts on the stock header on my 09GT.I removed the motor mount nuts and jacked the motor but that didn't help.I've got the driver side off but can't seem to reach the pass. side.any help would be...

was at cecil sat. ran 12.78 w/1.78 60'@108.44 my mods are JLT cai,4.10gears steeda pulley,no cat Xpipe w/magna flow mufflers and EVO tune left cecil at 10:30 am and went to atco to meet some cousins and ran a [email protected] now I'm swapping my gears out for 4.56's and thats on a 295-17 mickey...

went to the track sun. with my 09GT stock gears and drag radials,JLT cai,steeda pulley,h-pipe and evo tune it ran 12.90's @108 w/2.0 60'

my son's 04 lightning blew up friday night after going through the gears,it let go about 4000 rpm's in high.the day before the intercooler hose from the cooler to the pump thats behind the blower came off while driving and blew all the fluid out he pulled over and saw what happend fixed it and...

sold my 07 GT500 had a lot of fun in that car and it was the fastest thing I ever drove but know it's time for a new project.I'm looking at a 01 Lightning that has alot of mods done and most of the parts I would want.I'm looking for a stock look and a 11.5 et on a DR and maybe a high 10 in race...

got rid of my car today and I'll miss those 10 second thrill rides but time for the next project