Search results

@SVT_ODIE Dang it, I'll take one! I don't need it but I'll be glad I have a spare if mine ever cracks. Can you send me a PM with payment details? Thanks.

I saw that as well. But considering the price and the possible quality issues I've read about them I think I'd rather wait for LMR.

Anybody have any updates on these wheels? Fitment, quality, pics, etc. I'm in the market for some new DR's for my 17's but I've always wanted the 18" stock reps so I'm weighing my options. Looked at AFS and about fell out of my chair, then read about their quality issues, and then found out...

I don't plan on selling mine. For the past couple of years I keep telling myself off and on that I should sell it b/c I don't drive it much anymore (the last time I had those thoughts was 2011/2012 when I was bored with it. I did the logical thing and added more power.) Other hobbies get in...

I drove it! I finally found the time to pull it out of winter storage and take it out for a spin. This is the latest I've ever gotten it out of storage but kids and other hobbies have prevented me from getting it out sooner. Good news is, it still puts a smile on my face and turns...

Just wondering if anybody knows if the 2006 Mustang GT wheels will fit? I'm looking at a good deal on the wheels/tires to put on my car for winter storage. Bolt pattern is the same, they're 17" but I'm thinking the backspacing / offset are different but I cannot find the spec's on the...

Sold!

For Sale: Billet Flow Pulley Puller $125 shipped I have no use for this and have never used it. It has been sitting in a box for 5 years. 1 stud is broken from the previous owner (you can see the shorter one in the pic). The big u-shaped piece has some very light surface rust but it's...

Sold

First of all, I read all the old posts I could find and most of the times the problems were with Accufab TB's in 2004/05/06...the early runs with a cam for the '00 Cobra R. Found no solid answer other than that. Just took my stock Eaton off with stock TB. Neither have ever been off the car...

...

Going to a 2.2 KB @ 17psi setup soon. I've read enough and have some options but what would you do? I think I know the answer but I guess I'm looking for some reassurance. Currently running a K&N FIPK and stock intake tube. After installing a Lethal IC res. the K&N won't fit with the heat...

SOLD: Mods, please remove. Thanks. Note: I'm selling these for a friend. I have not seen them in person but he's a great guy. (Sorry, pictures are crappy cell phone pics from him) If you're serious, send me a PM and I will send you his phone # and email so all questions can be directed to...

Finally got around to installing Cobra Bob's gasket set this afternoon. The previous owner installed a Steeda Tri-ax shifter. I have never installed a short throw before but some things just didn't look right when I was removing it. Take a look at the pic of the handle+bolts. These are the...

As the title states, has anybody used this kit yet?? I just noticed it on their website today...hadn't seen it before. Is the quality of the spacer comparable to the MM spacers? Before seeing this I was going to go with MM 3/8" spacers and ET lugnuts from Summit but now I'm thinking about...

Just noticed this a few weeks ago. Had just pulled my car into the garage and was wiping it down when I heard something dripping & sizzling. First thought was that it might be my reservoir cap was bad and starting bubbling over. After further inspection I notice condensation from my AC...

This question seems a bit stupid but I'm going to ask anyways. I'm looking to get new tires for the rear. I've always had trucks so softer compound tires are new to me. My driveway is rock and is about 150 yds. long. The driveway then leads to a rock road which is about 100 yds. long to the...

Finished the lowering job this afternoon. Stock 17" wheels, 3/4 coil cut stock springs all around, Steeda C/C plates. Also re-polished the exhaust since it was off. Had to make 3 tries at the rear left spring as it was sitting almost 1" high after the first try. Overall it sits pretty level...

Steeda CC plates. What spacer configuration?? Couple questions here. I'm trying to find how much drop you typically see with 3/4 coil cut springs in all 4 corners. I've searched through my subscribed threads and in the complete lowering thread and so far all I have found is one post saying...

Installed a Bassani catted X tonight. Ordered it and BBK O2 extensions from LFP. Finished installing around 10:30...the rev's sound good but didn't go for a drive yet as I live in the country and there are too many deer and other critters running around at night. Anyways, the O2...

Changed the oil and trimmed the steering rack sleeves this evening and started the install for the Billetflow IRS diff. cover brace. How difficult are the rear diff. mounting bolts to remove? (bolts #6 & 7. see link below if you don't know which ones I'm referring to) I'm getting A LOT of...

In the next month or so I will be lowering the car, installing CC plates, front & rear bump steer kit, new plugs, new mid-pipe, thinking about FLSFC, and would like to get a new tune. I will be doing all the installs (minus FLSFC) myself. Looking for shops in Northwestern Illinois, Northern...

I guess the Terminator wasn't really all that influential...or do Terminators not even exist? Or maybe I'm just upset. Mustang Mania - 2009 Detroit Auto Show - MSN Autos N/M..somebody beat me too it already: http://www.svtperformance.com/forums/road-side-pub-17/570401-top-ten-mustangs.html

In the next 2 months I plan on lowering the Cobra with 3/4 coil cut stock springs, install a Billet Flow diff. cover brace, add steeda C/C plates, fix the steering rack creak (trim the stockers or buy MM alum. bushings), and add a Bassani catted X. In a nutshell, I plan to do this all at once...

Like the title states, I am looking for a set of (4) stock, uncut Coupe springs for the 03/04 Cobra. PM me a price, pictures, and mileage if available. Shipping would be to Illinois, zip code 61421. Thanks.