Search results

Have a Fiore quad and FW adjuster with the stock cable. Was driving yesterday when, all of a sudden, the pedel hits the floor and the car is impossible to shift. I get it home just to find that basically, its like the cable grew another 6 inches. I had to adjust the fw adjuster all the way out...

Anyone know what the weight is on the end of the fork? Just wondering if its even needed?

Do I need to do anything in my tune or can I just bolt it up and go? Thanks for the help!

What is the name of the sensor that's inside of the intake tube? It's the small one with the little wire loop. (not the maf)

Hey guys. Had the P0174 pop up earlier in the week, later on followed the P0171. Found the culprit but don't know where to get the correct pre-formed hose. In the picture, the circled line runs to the back of the eaton. At the opposing end,(the end opposite of the circled) there is a piece that...

Wife's truck took a dump yesterday coming home from work. The rear air suspension is on the ground, layin' frame, so to speak. I've checked the bags and they appear to be fine. So I'm thinking its the main relay for the compressor or the compressor itself. However, I cant find the Relay. Anyone...

ANYBODY got the machine faced 03 wheels dished? The only pic i've ever run across was this one... Dont think they would look to bad on a lowered car...just dont know of anyone who's done it on a term yet.

Anyone running the machine faced AFS 18x10.5 reps? I can only find one picture of a black sn95 with them on. I've searched. Thanks guys.

which clutch? Ram Powergrip Item # RAM-98951 or Spec Stage 2? It will be attached to a billet steel flywheel and its for a 10 spline. Mods in sig. Thanks guys! or also, if a factory replacement will work, can go with that.

Ive had a SPEC 3 clutch on a resurfaced flywheel for about 25K miles. Maybe two track passes on it and its my DD so I drive it pretty gingerly. Yesterday, I get on the highway and as soon as i get into boost, it free revs. I get out of it, works fine. My question is, do you think the clutch is...

Im looking to get the Pioneer AVH-4100 and I was wondering if I have everything. I will get the wiring harness from crutchfield for 20.00 and an install kit. After that, should I be good to go? (i know its not navi but I dont go anywhere I havn't been already) thanks guys. :banana:

Anybody have pics, please post! I searched to no avail.

I have the car jacked up now and I cant figure out the right path for my new OEM clutch cable. Anyone have under hood pics as well as under motor pics??

Anybody ever remove the black paint from their emblems? I have a black term and I think it may be a nice "accent".

So for as long as I can remember, I have had this annoying "squeek" coming from the rearend of the car. You could push down on either rear quarter and it would do it. Was thinking bushings, at first. Lubed them up and checked them out...nothing. Then, maybe shocks...but both acted like they had...

2003 Cobra Deep Dish Wheels just showing these incase they havn't been seen yet. I hadn't heard of the revised one's being released. Look much better.

has anyone ever cut some to get a slightly lower look? I want mine just a hair lower without having to buy the sports. I think I'm staying with my stock 17's and having the rears widened.

Sorry if this seems stupid. I want to replace my wiper arms. Will any 99-04 mustang arms work, or are they specific to our cars?? Thanks for the help, guys.

helping a buddy install some seq. tails. Its the kit off ebay from canada. Just wondering if anyone has used it?? We can't get the center lights to come on at all on both sides. The only time they do light, is when the parking lights are on. ANY help from anyone who has installed them would be...

i searched but came up with nothing. Anybody running the 03 cobra black chrome wheel package like lethal has? The 17x9/10.5's. Would like to see it with some fat meats on a lowered car.

anyone running these wheels on their term? I've seen them on an SN95 Cobra, black with the silver wheels staggared, and it looked pretty clean. edit: you can find them at wheel replica's.

I noticed some oil on the top part of my blower, right along where the snout is bolted on so I guess I will need to reseal it. Do i just use some RTV blue or what for a gasket? Thanks!

every so often when I clean the motor, I notice oil on the blower snout. Anyone else have this problem? It's not a lot but it concerns me. If so, how did you correct it? (I do have a crankcase vent on the pass side head)

I had to replace my squeeling TOB so I did a clutch job while I was at it. Replaced the stocker with a SPEC 3. I resurfaced the stock flywheel as there was still life in it. Everything went smoothly and what-not. After a few months, it started to squeek. I put it in first, let out, as it's...

Yesterday, got the car up on the lift to mock up everything in preperation for the saturday install. Got to looking and it's pretty straightforward and the instructions are pretty concise. However, what do I do about the passenger side brake and fuel lines? they are really close and while the...