Search results

Never gave them a thought. Will def check into them! Do you feel it’s a waste to have the FX4 to then replace them?

2019 F-150 Special Edition Appearance Package with the 20” wheels, FX4, 5.0 V8. Planning on doing a intake, 2” leveling kit, and tires. Just unsure how tall I can go with a 2” leveling kit over the stock 275/55/20 with out rubbing. Any suggestions to some mild mods and upgrades please let me know!

What size tire are you running now?

This fuel door came off my 03 Cobra. Was on it when i bought the car. I cant find who makes it or how much they run. Thinking about selling it, put a atock one on that i bought off a member on here but have to idea the manufactor or what it is worth. Thanks for the help!

Been doing some research, trying to figure out if the 31 spline 03/04 half shafts are right hand left hand specific or universal?

One found thanks everyone!

Before i start cussing and kicking my car im gunna walk away be we are both hot. Changed the coolant reservoir in my car. Simple right? Didnt really lose any coolant from anything other than the overflow. Filled it up. Easy right? Start the car it pushes it all put and acts like it has air in...

I was at the local Ford Dealership today for an interview and i know some people there and they were nice enough to let me borrow the Ford 2003 Cobra/Mustang Workshop Manual. Im in the process of a doin bunch of stuff to my 03 including changing valve covers. Anyway if yall have anything you...

I was at the local Ford Dealership today for an interview and i know some people there and they were nice enough to let me borrow the Ford 2003 Cobra/Mustang Workshop Manual. Im in the process of a doin bunch of stuff to my 03 including changing valve covers. Anyway if yall have anything you...

So im takin the hood off my 03 to some semi major work. Wanted it out of the way and upon reinstalling i have a set of MRT struts to go on with the hood. Hood have never been off and still has the painted hood studs and nuts on it. Takin them off slowly trying to get through all the paint. Long...

Just got my DSG power coated valve covers and powered by SVT coil covers back. Brain Pancoast (a member on here) with The Powder House, did an amazing job and i thought i would share! He is a great guy and did an outstanding job on these! Next im sending him my Eaton to match and is gunna look...

You can see my setup below that im running currently, stock upper/4lb lower= 12.5psi boost. Im going to a steggy stage VI port, keeping my 4lb lower, and adding 2.93 upper. I know from looking at the Eaton pulley chart a stock eaton with this combo should be about 16 psi max boost. Granted...

You can see my setup below that im running currently, stock upper/4lb lower= 12.5psi boost. Im going to a steggy stage VI port, keeping my 4lb lower, and adding 2.93 upper. I know from looking at the Eaton pulley chart a stock eaton with this combo should be about 16 psi max boost. Granted...

First, did all 03/04 Cobra's come with factory smoked headlights? Second im trying to find a OEM factory ford smoked headlights for my 03 Cobra. All im finding is the aftermarket dark smoked headlights or clear. Does anyone know where i can find factory OEM ford smoked style reproductions...

First, did all 03/04 Cobra's come with factory smoked headlights? Second im trying to find a OEM factory ford smoked headlights for my 03 Cobra. All im finding is the aftermarket dark smoked headlights or clear. Does anyone know where i can find factory OEM ford smoked style reproductions...

Anyone got any stock valve covers laying around? Paint scratches or chips dont matter just no dents or dings in the metal. Prefer with coil covers. Whos got a pair and how much?

I used to see stock eatons for $200-$300, now i see alot of them for $400-$600. What do yall think they are worth and whats the most you would pay for one right now?

Im looking for -E-Brake Boot with no rips, tears, etc. Steering wheel and blower purchased.

I'm in the Army so my 03 doesnt get driven too often, my dad backs it out of the garage once a week and let's it run for an hr. Still has a full tank of gas from when I was home in dec if that tells you anything. So I went to drive it finally. At an idle the car sounds fine but as soon as you...

I have been doing alot of reading on past threads on here about 315/35/17 555R drag radials on stock 03 cobra wheels having IRS bolt clearance issues. I have heard some say they had no issues with clearance, others say they did and required spacers. I test fitted my 315's on my cobra this...

I am in need of a stock 03 front shock. If anyone has 1 and willin to sell please let me know. Currently stationed at Ft Hood TX. Thanks!

I need a stock 03 cobra front shock. If anyone has one laying around they would like to sell please let me know! Thanks Brad! Currently stationed at Ft. Hood TX.

I have a blown drivers side shock. Caused by avoiding an accident by jumping a curb. Does anyone know if you need any special tool like a spring compressor or can anyone with a general tool box and jack do the job? Anyone have any how to advice? It would be greatly appreciated!

I avoided an accident when a guy pulled out in front of me. My front drivers side took a nasty hit when i had to jump a curb to avoid him. I noticed the last week faint squeaking coming from that corner. Drove it today and its worse. Looked and sure enough its blown. Does anyone know if you can...

I installed a mechanical water temp gauge in my Cobra this afternoon and the water neck has a plug that can be removed for access to install the water temp sensor there. However when i tried to install the plug that the water temp sensor screws into that came with the gauge its too small. I had...